Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, adjacent attacker to bypass authentication and have direct unauthorized access to other vSmart containers. The vulnerability is due to an insecure default configuration of the affected system. An attacker could exploit this vulnerability by directly connecting to the exposed services. An exploit could allow the attacker to retrieve and modify critical system files.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3043, and CVE-2010-3044.

The Clientless SSL VPN feature in Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(5.7), 8.6.x before 8.6(1.12), 9.0.x before 9.0(2.6), and 9.1.x before 9.1(1.7) allows remote attackers to cause a denial of service (device reload) via crafted HTTPS requests, aka Bug ID CSCua22709.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

The ITM web server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (temporary HTTP service outage) via a flood of TCP packets, aka Bug ID CSCuh36313.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or email attachment and persuading the user to open the file with the affected software. Successful exploitation could allow the attacker to execute arbitrary code on the affected system.

The OSPFv3 functionality in Cisco IOS XR 5.1 allows remote attackers to cause a denial of service (process crash) via a malformed LSA Type-1 packet, aka Bug ID CSCuj82176.

A vulnerability in the Trust Verification Service (TVS) of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) traffic by the affected software. An attacker could exploit this vulnerability by generating incomplete traffic streams. A successful exploit could allow the attacker to deny access to the TVS for an affected device, resulting in a DoS condition, until an administrator restarts the service. Known Affected Releases 10.0(1.10000.24) 10.5(2.10000.5) 11.0(1.10000.10) 9.1(2.10000.28). Cisco Bug IDs: CSCux21905.

Multiple buffer overflow vulnerabilities exist in the Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious ARF file via email or URL and convincing the user to launch the file. Exploitation of these vulnerabilities could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. The Cisco WebEx Network Recording Player is an application that is used to play back WebEx meeting recordings that have been recorded on the computer of an online meeting attendee. The player can be automatically installed when the user accesses a recording file that is hosted on a WebEx server. The following client builds are affected by this vulnerability: Cisco WebEx Business Suite (WBS29) client builds prior to T29.13.130, Cisco WebEx Business Suite (WBS30) client builds prior to T30.17, Cisco WebEx Business Suite (WBS31) client builds prior to T31.10. Cisco Bug IDs: CSCvc47758 CSCvc51227 CSCvc51242.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.

A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260.

Cisco Unified Communications Manager (aka CUCM or Unified CM) allows remote attackers to cause a denial of service (service restart) via a crafted SIP message, aka Bug ID CSCub54349.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 1.6.x; Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x; Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x; and Cisco TelePresence Manager 1.2.x, 1.3.x, 1.4.x, 1.5.x, and 1.6.2 allows remote attackers to execute arbitrary code via a crafted Cisco Discovery Protocol packet, aka Bug IDs CSCtd75769, CSCtd75766, CSCtd75754, and CSCtd75761.

A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when an FCoE-related process unexpectedly reloads. This vulnerability affects Cisco NX-OS Software on the following Cisco devices when they are configured for FCoE: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. More Information: CSCvc91729. Known Affected Releases: 8.3(0)CV(0.833). Known Fixed Releases: 8.3(0)ISH(0.62) 8.3(0)CV(0.944) 8.1(1) 8.1(0.8)S0 7.3(2)D1(0.47).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST.

A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544.

A vulnerability in Cisco WebEx browser extensions for Google Chrome and Mozilla Firefox could allow an unauthenticated, remote attacker to execute arbitrary code with the privileges of the affected browser on an affected system. This vulnerability affects the browser extensions for Cisco WebEx Meetings Server, Cisco WebEx Centers (Meeting Center, Event Center, Training Center, and Support Center), and Cisco WebEx Meetings when they are running on Microsoft Windows. The vulnerability is due to a design defect in the extension. An attacker who can convince an affected user to visit an attacker-controlled web page or follow an attacker-supplied link with an affected browser could exploit the vulnerability. If successful, the attacker could execute arbitrary code with the privileges of the affected browser. The following versions of the Cisco WebEx browser extensions are affected: Versions prior to 1.0.12 of the Cisco WebEx extension on Google Chrome, Versions prior to 1.0.12 of the Cisco WebEx extension on Mozilla Firefox. Cisco Bug IDs: CSCvf15012 CSCvf15020 CSCvf15030 CSCvf15033 CSCvf15036 CSCvf15037.

A vulnerability in the gateway GPRS support node (GGSN) of Cisco ASR 5000 Series Aggregation Services Routers 17.3.9.62033 through 21.1.2 could allow an unauthenticated, remote attacker to redirect HTTP traffic sent to an affected device. More Information: CSCvc67927.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.

A Denial of Service vulnerability in the remote login functionality for Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. The attacker could use either a Telnet or an SSH client for the remote login attempt. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCuy25824. Known Affected Releases: 7.0(3)I3(1) 8.3(0)CV(0.342) 8.3(0)CV(0.345). Known Fixed Releases: 8.3(0)CV(0.362) 8.0(1) 7.0(3)IED5(0.19) 7.0(3)IED5(0) 7.0(3)I4(1) 7.0(3)I4(0.8) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1) 7.0(3)F1(0.230).

A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330.

A vulnerability in the URL filtering feature of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass a configured URL filter rule. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA), both virtual and hardware appliances, that are configured with URL filters for email scanning. More Information: CSCvc69700. Known Affected Releases: 8.5.3-069 9.1.1-074 9.1.2-010.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751.

A Denial of Service vulnerability in the Telnet remote login functionality of Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a Telnet process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCux46778. Known Affected Releases: 7.0(3)I3(0.170). Known Fixed Releases: 7.0(3)I3(1) 7.0(3)I3(0.257) 7.0(3)I3(0.255) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1).