Pengutronix barebox through 2019.08.1 has a remote buffer overflow in nfs_readlink_reply in net/nfs.c because a length field is directly used for a memcpy.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

A stack-based buffer overflow vulnerability in FortiWeb 6.3.0 through 6.3.5 and version before 6.2.4 may allow an unauthenticated, remote attacker to overwrite the content of the stack and potentially execute arbitrary code by sending a crafted request with a large certname.

Heap-based Buffer Overflow in GitHub repository strukturag/libde265 prior to and including 1.0.8. The fix is established in commit 8e89fe0e175d2870c39486fdd09250b230ec10b8 but does not yet belong to an official release.

Exim 4 before 4.94.2 has Improper Restriction of Write Operations within the Bounds of a Memory Buffer. This occurs when processing name=value pairs within MAIL FROM and RCPT TO commands.

In Wind River VxWorks, memory allocator has a possible overflow in calculating the memory block's size to be allocated by calloc(). As a result, the actual memory allocated is smaller than the buffer size specified by the arguments, leading to memory corruption.

A heap-based buffer overflow vulnerability exists in the configuration server functionality of the Cosori Smart 5.8-Quart Air Fryer CS158-AF 1.1.0. A specially crafted JSON object can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability.

Exim 4 before 4.94.2 allows Buffer Underwrite that may result in unauthenticated remote attackers executing arbitrary commands, because smtp_ungetc was only intended to push back characters, but can actually push back non-character error codes such as EOF.

Heap-based Buffer Overflow in vim/vim prior to 8.2.

An issue was discovered in ReadyTalk Avian 1.2.0 before 2020-10-27. The FileOutputStream.write() method in FileOutputStream.java has a boundary check to prevent out-of-bounds memory read/write operations. However, an integer overflow leads to bypassing this check and achieving the out-of-bounds access. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an unauthenticated, remote attacker to send a specially crafted HTTP message and achieve remote code execution with elevated privileges.

The DNS feature in InterNiche NicheStack TCP/IP 4.0.1 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: DNS response processing functions: dns_upcall(), getoffset(), dnc_set_answer(). The attack vector is: a specific DNS response packet. The code does not check the "response data length" field of individual DNS answers, which may cause out-of-bounds read/write operations, leading to Information leak, Denial-or-Service, or Remote Code Execution, depending on the context.

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

An issue was discovered in Foxit Reader and PhantomPDF before 10.1. If TslAlloc attempts to allocate thread local storage but obtains an unacceptable index value, V8 throws an exception that leads to a write access violation (and read access violation).

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Netatalk. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ad_addcomment function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15876.

NHIServiSignAdapter fails to verify the length of digital credential files’ path which leads to a heap overflow loophole. Remote attackers can use the leak to execute code without privilege.

In Eclipse OpenJ9 up to and including version 0.23, there is potential for a stack-based buffer overflow when the virtual machine or JNI natives are converting from UTF-8 characters to platform encoding.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1. In a certain Shading calculation, the number of outputs is unequal to the number of color components in a color space. This causes an out-of-bounds write.

An issue was discovered in Treck IPv6 before 6.0.1.68. Improper Input Validation in the IPv6 component allows an unauthenticated remote attacker to cause an Out of Bounds Write, and possibly a Denial of Service via network access.

KEPServerEX: v6.0 to v6.9, ThingWorx Kepware Server: v6.8 and v6.9, ThingWorx Industrial Connectivity: All versions, OPC-Aggregator: All versions, Rockwell Automation KEPServer Enterprise, GE Digital Industrial Gateway Server: v7.68.804 and v7.66, Software Toolbox TOP Server: All 6.x versions are vulnerable to a stack-based buffer overflow. Opening a specifically crafted OPC UA message could allow an attacker to crash the server and remotely execute code.

499ES EtherNet/IP (ENIP) Adaptor Source Code is vulnerable to a stack-based buffer overflow, which may allow an attacker to send a specially crafted packet that may result in a denial-of-service condition or code execution.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

A heap-based buffer overflow in the Treck HTTP Server component before 6.0.1.68 allows remote attackers to cause a denial of service (crash/reset) or to possibly execute arbitrary code.

Tenda AC Series Router AC11_V02.03.01.104_CN was discovered to contain a stack buffer overflow in the onlineList module. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

There is a stack buffer overflow vulnerability in the formSetPPTPServer function of Tenda-AX3 router V16.03.12.10_CN. The v10 variable is directly retrieved from the http request parameter startIp. Then v10 will be splice to stack by function sscanf without any security check,which causes stack overflow. By POSTing the page /goform/SetPptpServerCfg with proper startIp, the attacker can easily perform remote code execution with carefully crafted overflow data.

Dnsmasq 2.86 has a heap-based buffer overflow in resize_packet (called from FuzzResizePacket and fuzz_rfc1035.c) because of the lack of a proper bounds check upon pseudo header re-insertion. NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge." However, a contributor states that a security patch (mentioned in 016162.html) is needed

An issue was discovered on Accfly Wireless Security IR Camera System 720P with software versions v3.10.73 through v4.15.77. There is an unauthenticated stack-based buffer overflow in the function CFtpProtocol::FtpLogin during the update procedure.

An issue was discovered on Accfly Wireless Security IR Camera System 720P with software versions v3.10.73 through v4.15.77. There is an unauthenticated heap-based buffer overflow in the function CNetClientTalk::OprMsg during incoming message handling.

An issue was discovered in Noise-Java through 2020-08-27. AESGCMOnCtrCipherState.encryptWithAd() allows out-of-bounds access.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.74, D8500 before 1.0.3.60, DC112A before 1.0.0.56, R6300v2 before 1.0.4.50, R6400 before 1.0.1.68, R7000 before 1.0.11.116, R7100LG before 1.0.0.70, RBS40V before 2.6.2.8, RBW30 before 2.6.2.2, RS400 before 1.5.1.80, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

Tenda AC Series Router AC11_V02.03.01.104_CN was discovered to contain a stack buffer overflow in the wanBasicCfg module. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

An issue was discovered in the IPv6 stack in Contiki through 3.0. There is an insufficient check for the IPv6 header length. This leads to Denial-of-Service and potential Remote Code Execution via a crafted ICMPv6 echo packet.

An issue was discovered on Accfly Wireless Security IR Camera System 720P with software versions v3.10.73 through v4.15.77. There is an unauthenticated stack-based buffer overflow in the function CNetClientGuard::SubOprMsg during incoming message handling.

An issue was discovered in Noise-Java through 2020-08-27. ChaChaPolyCipherState.encryptWithAd() allows out-of-bounds access.

Dnsmasq 2.86 has a heap-based buffer overflow in dhcp_reply (called from dhcp_packet and FuzzDhcp). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. The Quram image codec library allows attackers to overwrite memory and execute arbitrary code via crafted JPEG data that is mishandled during decoding. The Samsung IDs are SVE-2020-18088, SVE-2020-18225, SVE-2020-18301 (September 2020).

A stack-based buffer overflow in fbwifi_continue.cgi on Zyxel UTM and VPN series of gateways running firmware version V4.30 through to V4.55 allows remote unauthenticated attackers to execute arbitrary code via a crafted http packet.

com_line() in command.c in gnuplot 5.4 leads to an out-of-bounds-write from strncpy() that may lead to arbitrary code execution.

Dnsmasq 2.86 has a heap-based buffer overflow in extract_name (called from hash_questions and fuzz_util.c). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

An issue was discovered in the DNS implementation in Ethernut in Nut/OS 5.1. The DNS response data length is not checked (it can be set to an arbitrary value from a packet). This may lead to successful Denial-of-Service, and possibly Remote Code Execution.

Dnsmasq 2.86 has a heap-based buffer overflow in print_mac (called from log_packet and dhcp_reply). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

An issue was discovered on Accfly Wireless Security IR Camera 720P System with software versions v3.10.73 through v4.15.77. There is an unauthenticated stack-based buffer overflow in the function CNetClientManage::ServerIP_Proto_Set during incoming message handling.

An issue was discovered on Samsung mobile devices with Q(10.0) (exynos9830 chipsets) software. H-Arx allows attackers to execute arbitrary code or cause a denial of service (memory corruption) because indexes are mishandled. The Samsung ID is SVE-2020-17426 (August 2020).

A vulnerability was identified in quickjs-ng quickjs up to 0.11.0. This issue affects the function js_typed_array_sort of the file quickjs.c. The manipulation leads to heap-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The identifier of the patch is 53eefbcd695165a3bd8c584813b472cb4a69fbf5. To fix this issue, it is recommended to deploy a patch.

An issue was discovered in Noise-Java through 2020-08-27. AESGCMFallbackCipherState.encryptWithAd() allows out-of-bounds access.

There is a stack buffer overflow vulnerability in the formSetPPTPServer function of Tenda-AX3 router V16.03.12.10_CN. The v13 variable is directly retrieved from the http request parameter startIp. Then v13 will be splice to stack by function sscanf without any security check, which causes stack overflow. By POSTing the page /goform/SetPptpServerCfg with proper startIp, the attacker can easily perform remote code execution with carefully crafted overflow data.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.

Dnsmasq 2.86 has a heap-based buffer overflow in extract_name (called from answer_auth and FuzzAuth). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

Tenda AC Series Router AC11_V02.03.01.104_CN was discovered to contain a stack buffer overflow in the wifiBasicCfg module. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

An issue was discovered in the IPv6 stack in Contiki through 3.0. There are inconsistent checks for IPv6 header extension lengths. This leads to Denial-of-Service and potential Remote Code Execution via a crafted ICMPv6 echo packet.