CISCO IP 8800 phones with software 11.0.1 and earlier allow local users to gain privileges for OS command execution via crafted CLI commands, aka Bug ID CSCuz03005.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow local users to obtain root access via crafted CLI input, aka Bug ID CSCuy21892.

Cisco Aironet Access Point Software 8.2(100.0) on 1830e, 1830i, 1850e, 1850i, 2800, and 3800 access points allows local users to obtain Linux root access via crafted CLI command parameters, aka Bug ID CSCuy64037.

Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.

The publish-event event-manager feature in Cisco IOS 15.5(2)S and 15.5(3)S on Cloud Services Router 1000V devices allows local users to execute arbitrary commands with root privileges by leveraging administrative access to enter crafted environment variables, aka Bug ID CSCux14943.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device.

dne2000.sys in Citrix Deterministic Network Enhancer (DNE) 2.21.7.233 through 3.21.7.17464, as used in (1) Cisco VPN Client, (2) Blue Coat WinProxy, and (3) SafeNet SoftRemote and HighAssurance Remote, allows local users to gain privileges via a crafted DNE_IOCTL DeviceIoControl request to the \\.\DNE device interface.

Cisco Integrated Management Controller in Cisco Unified Computing System 2.2(2c)A and earlier allows local users to obtain shell access via a crafted map-nfs command, aka Bug ID CSCup05998.

A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.

A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753.

A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743.

A vulnerability in the role-based access-checking mechanisms of Cisco Unified Computing System (UCS) Software could allow an authenticated, local attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected system. A successful exploit could allow the attacker to cause other users to execute unwanted arbitrary commands on the affected system. Cisco Bug IDs: CSCvf52994.

A vulnerability in the Disk Check Tool (disk-check.sh) for Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to elevate their privilege level to root. The attacker must have valid user credentials with super user privileges (level 15) to log in to the device. The vulnerability is due to insufficient validation of script files executed in the context of the Disk Check Tool. An attacker could exploit this vulnerability by replacing one script file with a malicious script file while the affected tool is running. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. Cisco Bug IDs: CSCvi72673.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows physically proximate attackers to execute arbitrary commands as root by pulling up the diagnostics menu on the set-top box, and then posting to a Web Inspector route.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the role-based access-checking mechanisms of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on an affected device. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected device. A successful exploit could allow the attacker to cause other users to execute unwanted, arbitrary commands on the affected device. Cisco Bug IDs: CSCvd06339, CSCvd15698, CSCvd36108, CSCvf52921, CSCvf52930, CSCvf52953, CSCvf52976.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCve74432.

A vulnerability in TACACS authentication with Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, local attacker to perform certain operations within the GUI that are not normally available to that user on the CLI. The vulnerability is due to incorrect parsing of a specific TACACS attribute received in the TACACS response from the remote TACACS server. An attacker could exploit this vulnerability by authenticating via TACACS to the GUI on the affected device. A successful exploit could allow an attacker to create local user accounts with administrative privileges on an affected WLC and execute other commands that are not allowed from the CLI and should be prohibited.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with Administrator privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as a low-privileged user to execute the affected commands. A successful exploit could allow the attacker to execute commands with Administrator privileges.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in how DLL files are loaded with Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to install and run an executable file with privileges equivalent to the Microsoft Windows SYSTEM account. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. The attacker would need valid user credentials to exploit this vulnerability. This vulnerability affects all Cisco AnyConnect Secure Mobility Client for Windows software versions prior to 4.4.02034. Cisco Bug IDs: CSCvc97928.

A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb99384. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.11.3i.ROUT 6.2.1.29i.ROUT 6.2.1.26i.ROUT.

A vulnerability in the backup and restore functionality of Cisco FireSIGHT System Software could allow an authenticated, local attacker to execute arbitrary code on a targeted system. More Information: CSCvc91092. Known Affected Releases: 6.2.0 6.2.1.

A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830.

A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with root privileges, aka Command Injection. More Information: CSCvb99406. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.1.28i.BASE 6.2.1.22i.BASE 6.1.32.8i.BASE 6.1.31.3i.BASE 6.1.3.10i.BASE.

A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976.

The command line interface (CLI) in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier allows local users to obtain privileges or cause a denial of service via unspecified vectors. NOTE: this issue can be leveraged remotely via CVE-2007-1063.

A vulnerability in Cisco SD-WAN Solution Software could allow an authenticated, local attacker to elevate privileges to Administrator on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain administrative privileges.