The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.
A vulnerability in Google-defined remote procedure call (gRPC) handling in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash due to a system memory leak, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco IOS XR Software with gRPC enabled. More Information: CSCvb14433. Known Affected Releases: 6.1.1.BASE 6.2.1.BASE. Known Fixed Releases: 6.2.1.22i.MGBL 6.1.22.9i.MGBL 6.1.21.12i.MGBL 6.1.2.13i.MGBL.
The DHCPv6 server module in Cisco CNS Network Registrar 7.1 allows remote attackers to cause a denial of service (daemon reload) via a malformed DHCPv6 packet, aka Bug ID CSCuo07437.
Memory leak in the SIP inspection engine in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (memory consumption and instability) via crafted SIP packets, aka Bug ID CSCuf67469.
A vulnerability in the IPsec component of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. Affected Products: ASR 5000 Series Routers, Virtualized Packet Core (VPC) Software. More Information: CSCvc21129. Known Affected Releases: 21.1.0 21.1.M0.65601 21.1.v0. Known Fixed Releases: 21.2.A0.65754 21.1.b0.66164 21.1.V0.66014 21.1.R0.65759 21.1.M0.65749 21.1.0.66030 21.1.0.
A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320.
Cisco IOS XR, when configured for Multi Protocol Label Switching (MPLS) and running on Cisco CRS-1 or Cisco 12000 series routers, allows remote attackers to cause a denial of service (Line card crash) via certain MPLS packets, as identified by Cisco bug ID CSCsc77475.
Control cards for Cisco Optical Networking System (ONS) 15000 series nodes before 20060405 allow remote attackers to cause a denial of service (card reset) via (1) a "crafted" IP packet to a device with secure mode EMS-to-network-element access, aka bug ID CSCsc51390; (2) a "crafted" IP packet to a device with IP on the LAN interface, aka bug ID CSCsd04168; and (3) a "malformed" OSPF packet, aka bug ID CSCsc54558.
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.
Cisco IOS XR, when configured for Multi Protocol Label Switching (MPLS) and running on Cisco CRS-1 routers, allows remote attackers to cause a denial of service (Modular Services Cards (MSC) crash or "MPLS packet handling problems") via certain MPLS packets, as identified by Cisco bug IDs (1) CSCsd15970 and (2) CSCsd55531.
Unspecified vulnerability in the HTTP compression functionality in Cisco CSS 11500 Series Content Services switches allows remote attackers to cause a denial of service (device reload) via (1) "valid, but obsolete" or (2) "specially crafted" HTTP requests.
The log4jinit web application in Cisco Unified Communications Manager (UCM) does not properly validate authentication, which allows remote attackers to cause a denial of service (performance degradation) via unspecified use of this application, aka Bug ID CSCum05347.
Cisco IOS 15.2(4)M4 on Cisco Unified Border Element (CUBE) devices allows remote attackers to cause a denial of service (input-queue consumption and traffic-processing outage) via crafted RTCP packets, aka Bug ID CSCuj72215.
The DHCPv6 implementation in Cisco IOS XR allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug IDs CSCum85558, CSCum20949, CSCul61849, and CSCul71149.
The Cisco IP Phone 7940 allows remote attackers to cause a denial of service (reboot) via a large amount of TCP SYN packets (syn flood) to arbitrary ports, as demonstrated to port 80.
A vulnerability in an internal API of the Cisco Meeting Server (CMS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected appliance. More Information: CSCvc89678. Known Affected Releases: 2.1. Known Fixed Releases: 2.1.2.
Cisco IP Phones 7902/7905/7912, ATA 186/188, Unity Express, ACNS, and Subscriber Edge Services Manager (SESM) allows remote attackers to cause a denial of service (crash or instability) via a compressed DNS packet with a label length byte with an incorrect offset.
Cisco ONS 15454 controller cards with software 10.0 and earlier allow remote attackers to cause a denial of service (card reload) via a crafted HTTP URI, aka Bug ID CSCun06870.
Cisco CSS 11500 Content Services Switch (CSS) with SSL termination services allows remote attackers to cause a denial of service (memory corruption and device reload) via a malformed client certificate during SSL session negotiation.
Cisco PIX 6.3 and 7.0 allows remote attackers to cause a denial of service (blocked new connections) via spoofed TCP packets that cause the PIX to create embryonic connections that that would not produce a valid connection with the end system, including (1) SYN packets with invalid checksums, which do not result in a RST; or, from an external interface, (2) one byte of "meaningless data," or (3) a TTL that is one less than needed to reach the internal destination.
Multiple unspecified vulnerabilities in the Internet Key Exchange version 1 (IKEv1) implementation in multiple Cisco products allow remote attackers to cause a denial of service (device reset) via certain malformed IKE packets, as demonstrated by the PROTOS ISAKMP Test Suite for IKEv1. NOTE: due to the lack of details in the Cisco advisory, it is unclear which of CVE-2005-3666, CVE-2005-3667, and/or CVE-2005-3668 this issue applies to.
The IKE implementation in Cisco IOS 15.4(1)T and earlier and IOS XE allows remote attackers to cause a denial of service (security-association drop) via crafted Main Mode packets, aka Bug ID CSCun31021.
A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396.
Cisco Identity Services Engine does not properly restrict the creation of guest accounts, which allows remote attackers to cause a denial of service (exhaustion of the account supply) via a series of requests within one session, aka Bug ID CSCue94287.
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.
Memory leak in inetinfo.exe in Cisco CallManager (CCM) 3.2 and earlier, 3.3 before 3.3(5), 4.0 before 4.0(2a)SR2b, and 4.1 4.1 before 4.1(3)SR1, when Multi Level Admin (MLA) is enabled, allows remote attackers to cause a denial of service (memory consumption) via a large number of Admin Service Tool (AST) logins that fail.
The tNetTaskLimit process on the Transport Node Controller (TNC) on Cisco ONS 15454 devices with software 9.6 and earlier does not properly prioritize health pings, which allows remote attackers to cause a denial of service (watchdog timeout and TNC reset) via a flood of network traffic, aka Bug ID CSCud97155.
The Java process in the Impact server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (process crash) via a flood of TCP packets, aka Bug ID CSCug57345.
Cisco CallManager (CCM) 3.2 and earlier, 3.3 before 3.3(5), 4.0 before 4.0(2a)SR2b, and 4.1 4.1 before 4.1(3)SR1 does not quickly time out Realtime Information Server Data Collection (RISDC) sockets, which results in a "resource leak" that allows remote attackers to cause a denial of service (memory and connection consumption) in RisDC.exe.
Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.
The SNMP module in Cisco IOS XR allows remote attackers to cause a denial of service (process reload) via a request for an unspecified MIB, aka Bug ID CSCuh43144.
Cisco ONS 15216 Optical Add/Drop Multiplexer (OADM) running firmware 2.2.2 and earlier allows remote attackers to cause a denial of service (management plane session loss) via crafted telnet data.
A Denial of Service vulnerability in the Telnet remote login functionality of Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a Telnet process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCux46778. Known Affected Releases: 7.0(3)I3(0.170). Known Fixed Releases: 7.0(3)I3(1) 7.0(3)I3(0.257) 7.0(3)I3(0.255) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1).
Cisco Security Agent (CSA) 4.5 allows remote attackers to cause a denial of service (system crash) via a crafted IP packet.
Cisco Secure Access Control System (ACS) does not properly implement an incoming-packet firewall rule, which allows remote attackers to cause a denial of service (process crash) via a flood of crafted packets, aka Bug ID CSCui51521.
Cisco CallManager (CCM) 3.2 and earlier, 3.3 before 3.3(5), 4.0 before 4.0(2a)SR2b, and 4.1 4.1 before 4.1(3)SR1 allows remote attackers to cause a denial of service (memory consumption and restart) via crafted packets to (1) the CTI Manager (ctimgr.exe) or (2) the CallManager (ccm.exe).
Cisco Common Services, as used in Cisco Prime LAN Management Solution (LMS), Cisco Security Manager, Cisco Unified Service Monitor, and Cisco Unified Operations Manager, does not properly interact with the ActiveMQ component, which allows remote attackers to cause a denial of service (memory consumption) via simultaneous TCP sessions, aka Bug IDs CSCuh54766, CSCuh01267, CSCuh95976, and CSCuh95969.
A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660.
Cisco Secure Access Control System (ACS) does not properly handle requests to read from the TACACS+ socket, which allows remote attackers to cause a denial of service (process crash) via malformed TCP packets, aka Bug ID CSCuh12488.
A Denial of Service vulnerability in the remote login functionality for Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. The attacker could use either a Telnet or an SSH client for the remote login attempt. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCuy25824. Known Affected Releases: 7.0(3)I3(1) 8.3(0)CV(0.342) 8.3(0)CV(0.345). Known Fixed Releases: 8.3(0)CV(0.362) 8.0(1) 7.0(3)IED5(0.19) 7.0(3)IED5(0) 7.0(3)I4(1) 7.0(3)I4(0.8) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1) 7.0(3)F1(0.230).
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.
The Precision Video Engine component in Cisco Jabber for Windows and Cisco Virtualization Experience Media Engine allows remote attackers to cause a denial of service (process crash and call disconnection) via crafted RTP packets, aka Bug IDs CSCuh60706 and CSCue21117.
The Java-based software in Cisco Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (closing of TCP ports) via unspecified vectors, aka Bug IDs CSCug77633, CSCug77667, CSCug78266, CSCug82795, and CSCuh58643.
A vulnerability in the Slowpath of StarOS for Cisco ASR 5500 Series routers with Data Processing Card 2 (DPC2) could allow an unauthenticated, remote attacker to cause a subset of the subscriber sessions to be disconnected, resulting in a partial denial of service (DoS) condition. This vulnerability affects Cisco ASR 5500 devices with Data Processing Card 2 (DPC2) running StarOS 18.0 or later. More Information: CSCvb12081. Known Affected Releases: 18.7.4 19.5.0 20.0.2.64048 20.2.3 21.0.0. Known Fixed Releases: 18.7.4 18.7.4.65030 18.8.M0.65044 19.5.0 19.5.0.65092 19.5.M0.65023 19.5.M0.65050 20.2.3 20.2.3.64982 20.2.3.65017 20.2.a4.65307 20.3.M0.64984 20.3.M0.65029 20.3.M0.65037 20.3.M0.65071 20.3.T0.64985 20.3.T0.65031 20.3.T0.65043 20.3.T0.65067 21.0.0 21.0.0.65256 21.0.M0.64922 21.0.M0.64983 21.0.M0.65140 21.0.V0.65150 21.1.A0.64932 21.1.A0.64987 21.1.A0.65145 21.1.PP0.65270 21.1.R0.65130 21.1.R0.65135 21.1.R0.65154 21.1.VC0.65203 21.2.A0.65147.
The firewall subsystem in Cisco Identity Services Engine has an incorrect rule for open ports, which allows remote attackers to cause a denial of service (CPU consumption or process crash) via a flood of malformed IP packets, aka Bug ID CSCug94572.
The RIP process in Cisco IOS XR allows remote attackers to cause a denial of service (process crash) via a crafted version-2 RIP packet, aka Bug ID CSCue46731.
The DNS server for Cisco Content Service Switch (CSS) 11000 and 11500, when prompted for a nonexistent AAAA record, responds with response code 3 (NXDOMAIN or "Name Error") instead of response code 0 ("No Error"), which allows remote attackers to cause a denial of service (inaccessible domain) by forcing other DNS servers to send and cache a request for a AAAA record to the vulnerable server.
Cisco IOS 12.0S through 12.3YH allows remote attackers to cause a denial of service (device restart) via a crafted IPv6 packet.
Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (flash write outage) via a TCP FIN attack that triggers file-descriptor exhaustion, aka Bug ID CSCug97315.
Cisco CSS 11000 routers on the CS800 chassis allow remote attackers to cause a denial of service (CPU consumption or reboot) via a large number of TCP SYN packets to the circuit IP address, aka "ONDM Ping failure."