The Auth0 authentication service before 2017-10-15 allows privilege escalation because the JWT audience is not validated.

passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by tampering with a valid SAML response. This can be done by adding attributes to the response. Users are affected specifically when the service provider is using `passport-wsfed-saml2` and a valid SAML Response signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability.

Auth0-PHP provides the PHP SDK for Auth0 Authentication and Management APIs. Starting in version 8.0.0-BETA1 and prior to version 8.14.0, session cookies of applications using the Auth0-PHP SDK configured with CookieStore have authentication tags that can be brute forced, which may result in unauthorized access. Certain pre-conditions are required to be vulnerable to this issue: Applications using the Auth0-PHP SDK, or the Auth0/symfony, Auth0/laravel-auth0, and Auth0/wordpress SDKs that rely on the Auth0-PHP SDK; and session storage configured with CookieStore. Upgrade Auth0/Auth0-PHP to v8.14.0 to receive a patch. As an additional precautionary measure, rotating cookie encryption keys is recommended. Note that once updated, any previous session cookies will be rejected.

passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by crafting a SAMLResponse. This can be done by using a valid SAML object that was signed by the configured IdP. Users are affected specifically when the service provider is using passport-wsfed-saml2 and a valid SAML document signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability.

Passport-wsfed-saml2 is a ws-federation protocol and SAML2 tokens authentication provider for Passport. In versions prior to 4.6.3, a remote attacker may be able to bypass WSFed authentication on a website using passport-wsfed-saml2. A successful attack requires that the attacker is in possession of an arbitrary IDP signed assertion. Depending on the IDP used, fully unauthenticated attacks (e.g without access to a valid user) might also be feasible if generation of a signed message can be triggered. This issue is patched in version 4.6.3. Use of SAML2 authentication instead of WSFed is a workaround.

jsonwebtoken is an implementation of JSON Web Tokens. Versions `<= 8.5.1` of `jsonwebtoken` library can be misconfigured so that passing a poorly implemented key retrieval function referring to the `secretOrPublicKey` argument from the readme link will result in incorrect verification of tokens. There is a possibility of using a different algorithm and key combination in verification, other than the one that was used to sign the tokens. Specifically, tokens signed with an asymmetric public key could be verified with a symmetric HS256 algorithm. This can lead to successful validation of forged tokens. If your application is supporting usage of both symmetric key and asymmetric key in jwt.verify() implementation with the same key retrieval function. This issue has been patched, please update to version 9.0.0.

In versions `<=8.5.1` of `jsonwebtoken` library, lack of algorithm definition in the `jwt.verify()` function can lead to signature validation bypass due to defaulting to the `none` algorithm for signature verification. Users are affected if you do not specify algorithms in the `jwt.verify()` function. This issue has been fixed, please update to version 9.0.0 which removes the default support for the none algorithm in the `jwt.verify()` method. There will be no impact, if you update to version 9.0.0 and you don’t need to allow for the `none` algorithm. If you need 'none' algorithm, you have to explicitly specify that in `jwt.verify()` options.

omniauth-auth0 (rubygems) versions >= 2.3.0 and < 2.4.1 improperly validate the JWT token signature when using the `jwt_validator.verify` method. Improper validation of the JWT token signature can allow an attacker to bypass authentication and authorization. You are affected by this vulnerability if all of the following conditions apply: 1. You are using `omniauth-auth0`. 2. You are using `JWTValidator.verify` method directly OR you are not authenticating using the SDK’s default Authorization Code Flow. The issue is patched in version 2.4.1.

Frams's Fast File EXchange (F*EX, aka fex) 20100208, and possibly other versions before 20110610, allows remote attackers to bypass authentication and upload arbitrary files via a request that lacks an authentication ID.

An improper authentication vulnerability in CA Privileged Access Manager 2.x allows attackers to spoof IP addresses in a log file.

VMware vFabric tc Server (aka SpringSource tc Server) 2.0.x before 2.0.6.RELEASE and 2.1.x before 2.1.2.RELEASE accepts obfuscated passwords during JMX authentication, which makes it easier for context-dependent attackers to obtain access by leveraging an ability to read stored passwords.

A security flaw has been discovered in zhenfeng13 My-Blog 1.0.0. This vulnerability affects unknown code of the file /blog/comment of the component Frontend Blog Article Comment Handler. The manipulation leads to authentication bypass by capture-replay. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

An authentication bypass vulnerability was found in overt-engine. This flaw allows the creation of users in the system without authentication due to a flaw in the CreateUserSession command.

The D-Link DIR-615 with firmware 3.10NA does not require administrative authentication for apply.cgi, which allows remote attackers to (1) change the admin password via the admin_password parameter, (2) disable the security requirement for the Wi-Fi network via unspecified vectors, or (3) modify DNS settings via unspecified vectors.

Duo Network Gateway 1.2.9 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

The telnetd service in FreeBSD 9.3, 10.1, 10.2, 10.3, and 11.0 allows remote attackers to inject arguments to login and bypass authentication via vectors involving a "sequence of memory allocation failures."

telepark.wiki 2.4.23 and earlier allows remote attackers to bypass authorization and (1) delete arbitrary pages via a modified pageID parameter to ajax/deletePage.php or (2) delete arbitrary comments via a modified pageID parameter to ajax/deleteComment.php.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

The Kide Shoutbox (com_kide) component 0.4.6 for Joomla! does not properly perform authentication, which allows remote attackers to post messages with an arbitrary account name via an insertar action to index.php. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

The OpenID module in Drupal 6.x before 6.18, and the OpenID module 5.x before 5.x-1.4 for Drupal, violates the OpenID 2.0 protocol by not verifying the openid.return_to value, which allows remote attackers to bypass authentication by leveraging an assertion from an OpenID provider.

A Security Feature Bypass vulnerability exists in ASP.NET when the number of incorrect login attempts is not validated, aka "ASP.NET Security Feature Bypass Vulnerability." This affects ASP.NET, ASP.NET Core 1.1, ASP.NET Core 1.0, ASP.NET Core 2.0, ASP.NET MVC 5.2.

The ConnectionExists function in lib/url.c in libcurl before 7.47.0 does not properly re-use NTLM-authenticated proxy connections, which might allow remote attackers to authenticate as other users via a request, a similar issue to CVE-2014-0015.

Wizkunde SAMLBase may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is No Authentication for the AeroScout Service via a crafted UDP packet.

Webservice-DIC yoyaku_v41 allows remote attackers to bypass authentication and complete a conference-room reservation via unspecified vectors, as demonstrated by an "unintentional reservation."

A vulnerability classified as critical has been found in SourceCodester Employee Task Management System 1.0. Affected is an unknown function of the file changePasswordForEmployee.php. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-221454 is the identifier assigned to this vulnerability.

An issue was discovered in Western Bridge Cobub Razor 0.7.2. Authentication is not required for /index.php?/install/installation/createuserinfo requests, resulting in account creation.

A flaw in the profile section of Online Voting System 1.0 allows an unauthenticated user to set an arbitrary password for other accounts.

An issue was discovered in GitLab Community and Enterprise Edition before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. It has Incorrect Access Control.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

A vulnerability classified as critical has been found in Multilaser Sirius RE016 MLT1.0. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

ZTE ZXDSL 831CII allows remote attackers to bypass authentication via a direct request to (1) main.cgi, (2) adminpasswd.cgi, (3) userpasswd.cgi, (4) upload.cgi, (5) conprocess.cgi, or (6) connect.cgi.

In JetBrains TeamCity before 2021.1.1, insufficient authentication checks for agent requests were made.

The OpenID Single Sign-On authentication functionality in OXID eShop before 4.5.0 allows remote attackers to impersonate users via the email address in a crafted authentication token.

Dell PowerScale OneFS, versions 8.2.2-9.3.0.x, contain an authentication bypass by primary weakness in one of the authentication factors. A remote unauthenticated attacker may potentially exploit this vulnerability and bypass one of the factors of authentication.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

The NETM() function of a smart contract implementation for NewIntelTechMedia (NETM), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The SAML 2.0 implementation in AdNovum nevisAuth 4.13.0.0 before 4.18.3.1, when using SAML POST-Binding, does not match all attributes of the X.509 certificate embedded in the assertion against the certificate from the identity provider (IdP), which allows remote attackers to inject arbitrary SAML assertions via a crafted certificate.

The WP JobSearch WordPress plugin before 2.3.4 does not prevent attackers from logging-in as any users with the only knowledge of that user's email address.

An improper authentication vulnerability was identified in GitHub Enterprise Server that allowed a bypass of Private Mode by using a specially crafted API request. To exploit this vulnerability, an attacker would need network access to the Enterprise Server appliance configured in Private Mode. This vulnerability affected all versions of GitHub Enterprise Server since 3.9 and was fixed in version 3.9.7, 3.10.4, and 3.11.1. This vulnerability was reported via the GitHub Bug Bounty program.

The owned function of a smart contract implementation for DDQ, an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

Authorization vulnerability in the BootLoader module. Successful exploitation of this vulnerability may affect service integrity.

Magento Community Edition (CE) 1.9.1.0 and Enterprise Edition (EE) 1.14.1.0 allow remote attackers to bypass authentication via the forwarded parameter.

RobotsAndPencils go-saml, a SAML client library written in Go, contains an authentication bypass vulnerability in all known versions. This is due to how the `xmlsec1` command line tool is called internally to verify the signature of SAML assertions. When `xmlsec1` is used without defining the enabled key data, the origin of the public key for the signature verification is, unfortunately, not restricted. That means an attacker can sign the SAML assertions themselves and provide the required public key (e.g. an RSA key) directly embedded in the SAML token. Projects still using RobotsAndPencils/go-saml should move to another SAML library or alternatively remove support for SAML from their projects. The vulnerability can likely temporarily be fixed by forking the go-saml project and adding the command line argument `--enabled-key-data` and specifying a value such as `x509` or `raw-x509-cert` when calling the `xmlsec1` binary in the verify function. Please note that this workaround must be carefully tested before it can be used.

HashiCorp Vault Enterprise 1.6.0 & 1.6.1 allowed the `remove-peer` raft operator command to be executed against DR secondaries without authentication. Fixed in 1.6.2.

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

The quaker function of a smart contract implementation for BOMBBA (BOMB), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

A vulnerability, which was classified as critical, has been found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. This issue affects the function addCrawlSource of the file novel-crawl/src/main/java/com/java2nb/novel/controller/CrawlController.java. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

DokuWiki before 2014-05-05b, when using Active Directory for LDAP authentication, allows remote attackers to bypass authentication via a password starting with a null (\0) character and a valid user name, which triggers an unauthenticated bind.

The ToOwner() function of a smart contract implementation for Cryptbond Network (CBN), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.