An arbitrary file writing vulnerability in the Secure PDF eXchange (SPX) feature of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to pre-auth remote code execution, if a specific configuration of SPX is enabled in combination with the firewall running in High Availability (HA) mode.

The get_referers function in /opt/ws/bin/sblistpack in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the domain parameter to end-user/index.php.

A remote code execution vulnerability exists in the WebAdmin of Sophos SG UTM before v9.705 MR5, v9.607 MR7, and v9.511 MR11

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

Multiple unspecified vulnerabilities in Sophos SAVScan 4.33.0 for Linux, and possibly other products and versions, allow remote attackers to cause a denial of service (segmentation fault) and possibly execute arbitrary code via crafted files that have been packed with (1) armadillo, (2) asprotect, or (3) asprotectSKE.

Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.

Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.

A code injection vulnerability in the User Portal and Webadmin allows a remote attacker to execute code in Sophos Firewall version v19.0 MR1 and older.

Multiple buffer overflows in Sophos Anti-Virus scanning engine before 2.40 allow remote attackers to execute arbitrary code via (1) a SIT archive with a long filename that is not null-terminated, which triggers a heap-based overflow in veex.dll due to improper length calculation, and (2) a CPIO archive, with a long filename that is not null-terminated, which triggers a stack-based overflow in veex.dll.

Unspecified vulnerability in WebAdmin in Sophos UTM (aka Astaro Security Gateway) before 9.105 has unknown impact and attack vectors.

An SQL injection vulnerability in the WebAdmin of Cyberoam OS through 2020-12-04 allows unauthenticated attackers to execute arbitrary SQL statements remotely.

A VMSF_DELTA memory corruption was discovered in unrar before 5.5.5, as used in Sophos Anti-Virus Threat Detection Engine before 3.37.2 and other products, that can lead to arbitrary code execution. An integer overflow can be caused in DataSize+CurChannel. The result is a negative value of the "DestPos" variable, which allows the attacker to write out of bounds when setting Mem[DestPos].

An authentication bypass vulnerability in the User Portal and Webadmin allows a remote attacker to execute code in Sophos Firewall version v18.5 MR3 and older.

A SQL injection vulnerability in the user and admin web interfaces of Sophos XG Firewall v18.0 MR1 and older potentially allows an attacker to run arbitrary code remotely. The fix is built into the re-release of XG Firewall v18 MR-1 (named MR-1-Build396) and the v17.5 MR13 release. All other versions >= 17.0 have received a hotfix.

A heap-based buffer overflow in the awarrensmtp component of Sophos XG Firewall v17.5 MR11 and older potentially allows an attacker to run arbitrary code remotely.

An XML External Entity (XEE) vulnerability allows server-side request forgery (SSRF) and potential code execution in Sophos Mobile managed on-premises between versions 5.0.0 and 9.7.4.

A SQL injection issue was found in SFOS 17.0, 17.1, 17.5, and 18.0 before 2020-04-25 on Sophos XG Firewall devices, as exploited in the wild in April 2020. This affected devices configured with either the administration (HTTPS) service or the User Portal exposed on the WAN zone. A successful attack may have caused remote code execution that exfiltrated usernames and hashed passwords for the local device admin(s), portal admins, and user accounts used for remote access (but not external Active Directory or LDAP passwords)

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

A shell escape vulnerability in /webconsole/APIController in the API Configuration component of Sophos XG firewall 17.0.8 MR-8 allows remote attackers to execute arbitrary OS commands via shell metachracters in the "X-Forwarded-for" HTTP header.

The network interface configuration page (netinterface) in Sophos Web Appliance before 3.8.2 allows remote administrators to execute arbitrary commands via shell metacharacters in the address parameter.

The close_connections function in /opt/cma/bin/clear_keys.pl in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows local users to gain privileges via shell metacharacters in the second argument.

Sophos Web Appliance before 3.7.8.2 allows (1) remote attackers to execute arbitrary commands via shell metacharacters in the client-ip parameter to the Block page, when using the user_workstation variable in a customized template, and remote authenticated users to execute arbitrary commands via shell metacharacters in the (2) url parameter to the Diagnostic Tools functionality or (3) entries parameter to the Local Site List functionality.

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via functions, aka NSWA-1304.

An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

lpd daemon (in.lpd) in Solaris 8 and earlier allows remote attackers to execute arbitrary commands via a job request with a crafted control file that is not properly handled when lpd invokes a mail program. NOTE: this might be the same vulnerability as CVE-2000-1220.

An OS command injection vulnerability exists in the NAT parameter of GoCast 1.1.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.

Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

A flaw was found in WebSVN 2.3.2. Without prior authentication, if the 'allowDownload' option is enabled in config.php, an attacker can invoke the dl.php script and pass a well formed 'path' argument to execute arbitrary commands against the underlying operating system.

OS command injection vulnerability exists in ffBull ver.4.11, which may allow a remote unauthenticated attacker to execute an arbitrary OS command with the privilege of the running web server. Note that the developer was unreachable, therefore, users should consider stop using ffBull ver.4.11.

The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.

phf CGI program allows remote command execution through shell metacharacters.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

The web interface in chumby one before 1.0.4 and chumby classic before 1.7.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a request.

GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary commands via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271, CVE-2014-7169, and CVE-2014-6277.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.

MVPower CCTV DVR models, including TV-7104HE 1.8.4 115215B9 and TV7108HE, contain a web shell that is accessible via a /shell URI. A remote unauthenticated attacker can execute arbitrary operating system commands as root. This vulnerability has also been referred to as the "JAWS webserver RCE" because of the easily identifying HTTP response server field. Other firmware versions, at least from 2014 through 2019, can be affected. This was exploited in the wild in 2017 through 2022.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.

The CGI scripts in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 do not properly validate an unspecified parameter, which allows remote attackers to execute arbitrary commands by using a command string for this parameter's value, related to a "command injection vulnerability."

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In multiple products of WAGO a vulnerability allows an unauthenticated, remote attacker to create new users and change the device configuration which can result in unintended behaviour, Denial of Service and full system compromise.

Xerox WorkCentre 3655, 3655i, 58XX, 58XXi, 59XX, 59XXi, 6655, 6655i, 72XX, 72XXi, 78XX, 78XXi, 7970, and 7970i devices before 073.xxx.086.15410 do not properly escape parameters in the support/remoteUI/configrui.php script, which can allow an unauthenticated attacker to execute OS commands on the device.