The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

The web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote attackers to execute arbitrary code as root via a crafted HTTP request, aka Bug ID CSCux82428.

Cisco Prime Infrastructure 1.2.0 through 2.2(2) and Cisco Evolved Programmable Network Manager (EPNM) 1.2 allow remote attackers to execute arbitrary code via crafted deserialized data in an HTTP POST request, aka Bug ID CSCuw03192.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

A vulnerability in the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to bypass certificate validation on an affected device. The vulnerability is due to improper certificate validation. An attacker could exploit this vulnerability by supplying a system image signed with a crafted certificate to an affected device, bypassing the certificate validation. An exploit could allow an attacker to deploy a crafted system image.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Java Remote Management Interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user on an affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

A vulnerability in the RAR file scanning functionality of Clam AntiVirus (ClamAV) Software versions 0.101.1 and 0.101.0 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a lack of proper error-handling mechanisms when processing nested RAR files sent to an affected device. An attacker could exploit this vulnerability by sending a crafted RAR file to an affected device. An exploit could allow the attacker to view or create arbitrary files on the targeted system.

Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote attackers to execute arbitrary code via a crafted dnslookup command in an HTTP request, aka Bug ID CSCuz89093.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Java deserialization function used by Cisco Security Manager could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary commands on the device with the privileges of casuser.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The UPnP IGD implementation on the Cisco Linksys WRT54GX with firmware 2.00.05, when UPnP is enabled, configures the SOAP server to listen on the WAN port, which allows remote attackers to administer the firewall via SOAP requests.

Format string vulnerability in the administration function in Cisco Secure Access Control Server (ACS) for Windows, 2.6.x and earlier and 3.x through 3.01 (build 40), allows remote attackers to crash the CSADMIN module only (denial of service of administration function) or execute arbitrary code via format strings in the URL to port 2002.

The original patch for the Cisco Content Service Switch 11000 Series authentication bypass vulnerability (CVE-2001-0622) was incomplete, which still allows remote attackers to gain additional privileges by directly requesting the web management URL instead of navigating through the interface, possibly via a variant of the original attack, as identified by Cisco bug ID CSCdw08549.

Cisco IOS Firewall Feature set, aka Context Based Access Control (CBAC) or Cisco Secure Integrated Software, for IOS 11.2P through 12.2T does not properly check the IP protocol type, which could allow remote attackers to bypass access control lists.

RSA BSAFE SSL-J 3.0, 3.0.1 and 3.1, as used in Cisco iCND 2.0, caches session IDs from failed login attempts, which could allow remote attackers to bypass SSL client authentication and gain access to sensitive data by logging in after an initial failure.

Cisco 6400 Access Concentrator Node Route Processor 2 (NRP2) 12.1DC card does not properly disable access when a password has not been set for vtys, which allows remote attackers to obtain access via telnet.

Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls.

Cisco Aironet 340 Series wireless bridge before 8.55 does not properly disable access to the web interface, which allows remote attackers to modify its configuration.

The web management service on Cisco Content Service series 11000 switches (CSS) before WebNS 4.01B29s or WebNS 4.10B17s allows a remote attacker to gain additional privileges by directly requesting the web management URL instead of navigating through the interface.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not support the "fragment" keyword in an outgoing ACL, which could allow fragmented packets in violation of the intended access.

Cisco CBOS 2.3.8 and earlier stores the passwords for (1) exec and (2) enable in cleartext in the NVRAM and a configuration file, which could allow unauthorized users to obtain the passwords and gain privileges.

Various Intrusion Detection Systems (IDS) including (1) Cisco Secure Intrusion Detection System, (2) Cisco Catalyst 6000 Intrusion Detection System Module, (3) Dragon Sensor 4.x, (4) Snort before 1.8.1, (5) ISS RealSecure Network Sensor 5.x and 6.x before XPU 3.2, and (6) ISS RealSecure Server Sensor 5.5 and 6.0 for Windows, allow remote attackers to evade detection of HTTP attacks via non-standard "%u" Unicode encoding of ASCII characters in the requested URL.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls.

Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges.

CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to bypass LDAP authentication on the server if the LDAP server allows null passwords.

By design, the "established" command on the Cisco PIX firewall allows connections from one host to arbitrary ports of a target host if an alternative conduit has already been allowed, which can cause administrators to configure less restrictive access controls than intended if they do not understand this functionality.