Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with Administrator privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as a low-privileged user to execute the affected commands. A successful exploit could allow the attacker to execute commands with Administrator privileges.

A vulnerability in the CLI of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges. To exploit this vulnerability, an attacker must have valid administrator-level credentials.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the system CLI. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the log subscription subsystem of Cisco AsyncOS for the Cisco Secure Web Appliance (formerly Web Security Appliance) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface and CLI. An attacker could exploit this vulnerability by authenticating to the affected device and injecting scripting commands in the scope of the log subscription subsystem. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root.

The Cisco PIX/ASA Finesse Operation System 7.1 and 7.2 allows local users to gain privileges by entering characters at the enable prompt, erasing these characters via the Backspace key, and then holding down the Backspace key for one second after erasing the final character. NOTE: third parties, including one who works for the vendor, have been unable to reproduce the flaw unless the enable password is blank

Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client do not properly parse commands, which allows local users to gain privileges via unspecified vectors, aka CSCsh30624.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco StarOS could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

A vulnerability in the Meraki onboarding feature of Cisco IOS XE Software could allow an authenticated, local attacker to gain root level privileges on an affected device. This vulnerability is due to insufficient memory protection in the Meraki onboarding feature of an affected device. An attacker could exploit this vulnerability by modifying the Meraki registration parameters. A successful exploit could allow the attacker to elevate privileges to root.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient input validation of user-supplied CLI arguments. An attacker could exploit this vulnerability by authenticating to an affected device and using crafted commands at the prompt. A successful exploit could allow the attacker to execute arbitrary commands as root. The attacker must have valid credentials on the affected device.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the installer script of Cisco AppDynamics PHP Agent could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient permissions that are set by the PHP Agent Installer on the PHP Agent install directory. An attacker could exploit this vulnerability by modifying objects in the PHP Agent install directory, which would run with the same privileges as PHP. A successful exploit could allow a lower-privileged attacker to elevate their privileges to root on an affected device.

A vulnerability in the privilege management functionality of all Cisco BroadWorks server types could allow an authenticated, local attacker to elevate privileges to root on an affected system. This vulnerability is due to incorrect implementation of user role permissions. An attacker could exploit this vulnerability by authenticating to the application as a user with the BWORKS or BWSUPERADMIN role and issuing crafted commands on an affected system. A successful exploit could allow the attacker to execute commands beyond the sphere of their intended access level, including initiating installs or running operating system commands with elevated permissions. There are workarounds that address this vulnerability.

A vulnerability in the client update process of Cisco AnyConnect Secure Mobility Client Software for Windows and Cisco Secure Client Software for Windows could allow a low-privileged, authenticated, local attacker to elevate privileges to those of SYSTEM. The client update process is executed after a successful VPN connection is established. This vulnerability exists because improper permissions are assigned to a temporary directory that is created during the update process. An attacker could exploit this vulnerability by abusing a specific function of the Windows installer process. A successful exploit could allow the attacker to execute code with SYSTEM privileges.

A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.

A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges. This vulnerability is due to insufficient input validation by the system CLI. An attacker with privileges to run commands could exploit this vulnerability by first authenticating to an affected device using either local terminal access or a management shell interface and then submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. Note: For additional information about specific impacts, see the Details section of this advisory.

Multiple vulnerabilities that affect Cisco Catalyst Digital Building Series Switches and Cisco Catalyst Micro Switches could allow an attacker to execute persistent code at boot time or to permanently prevent the device from booting, resulting in a permanent denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Unspecified vulnerability in the VPN Client for Windows Graphical User Interface (GUI) (aka the VPN client dialer) in Cisco VPN Client for Windows 4.8.00.* and earlier, except for 4.7.00.0533, allows local authenticated, interactive users to gain privileges, possibly due to privileges of dialog boxes, aka bug ID CSCsd79265.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

dne2000.sys in Citrix Deterministic Network Enhancer (DNE) 2.21.7.233 through 3.21.7.17464, as used in (1) Cisco VPN Client, (2) Blue Coat WinProxy, and (3) SafeNet SoftRemote and HighAssurance Remote, allows local users to gain privileges via a crafted DNE_IOCTL DeviceIoControl request to the \\.\DNE device interface.

An untrusted search path (aka DLL Preloading) vulnerability in the Cisco Immunet antimalware installer could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvf23928.

A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation during the installation of a software patch. An attacker could exploit this vulnerability by installing a crafted patch image with the vulnerable operation occurring prior to patch activation. An exploit could allow the attacker to execute arbitrary commands on an affected system as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf23735, CSCvg04072.

A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCvf15113, CSCvf15122, CSCvf15125, CSCvf15131, CSCvf15143, CSCvg04088.

An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco UCS Central Software could allow an authenticated, local attacker to gain shell access. The vulnerability is due to insufficient input validation of commands entered in the CLI, aka a Restricted Shell Break Vulnerability. An attacker could exploit this vulnerability by entering a specific command with crafted arguments. An exploit could allow the attacker to gain shell access to the underlying system. Cisco Bug IDs: CSCve70762.

A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain root-level privileges.

A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker with privileged EXEC credentials to execute arbitrary code on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient input validation of data passed to the Tcl interpreter. An attacker could exploit this vulnerability by loading malicious Tcl code on an affected device. A successful exploit could allow the attacker to cause memory corruption or execute the code with root privileges on the underlying OS of the affected device.

A vulnerability in the CLI command parser of the Cisco Mobility Express 2800 and 3800 Series Wireless LAN Controllers could allow an authenticated, local attacker to obtain access to the underlying operating system shell with root-level privileges. More Information: CSCvb70351. Known Affected Releases: 8.3(102.0).

Cisco Content Services (CSS) switch products 11800 and earlier, aka Arrowpoint, allows local users to gain privileges by entering debug mode.