A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this issue is some unknown functionality of the file /login.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected is an unknown function of the file /index.data. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /install_base.data. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The DLink Router DIR-895L MFC v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-link router DIR-885L-MFC 1.15b02, v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-Link router DIR-868L 3.01 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. The unauthenticated /config/getuser endpoint allows for remote administrator password disclosure.

D-Link DIR-890L FW1.10 A1 is vulnerable to Authentication bypass.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is an information disclosure vulnerability via requests for the router_info.xml document. This will reveal the PIN code, MAC address, routing table, firmware version, update time, QOS information, LAN information, and WLAN information of the device.

The web interface of the D-Link DVA-5592 20180823 is vulnerable to an authentication bypass that allows an unauthenticated user to have access to sensitive information such as the Wi-Fi password and the phone number (if VoIP is in use).

D-Link DIR-859 routers before v1.07b03_beta allow Unauthenticated Information Disclosure via the AUTHORIZED_GROUP=1%0a value, as demonstrated by vpnconfig.php.

An issue was discovered on D-Link DIR-816 A1 1.06 devices. An attacker could access management pages of the router via a client that ignores the 'top.location.href = "/dir_login.asp"' line in a .asp file. This provides access to d_status.asp, version.asp, d_dhcptbl.asp, and d_acl.asp.

An information disclosure vulnerability exists in the Syslog functionality of D-LINK DIR-882 1.30. A specially crafted network request can lead to the disclosure of sensitive information.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

Directory traversal vulnerability in the TFTP server in D-Link DIR-601 Wireless N150 Home Router with firmware 1.02NA allows remote attackers to read arbitrary files via unspecified vectors.

A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR-823G v1.0.2B05_20181207 is vulnerable to Information Disclosure. The device allows unauthorized configuration file downloads, and the downloaded configuration files contain plaintext user passwords.

D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings.

atbox.htm on D-Link DSL-2770L devices allows remote unauthenticated attackers to discover admin credentials.

dirary0.js on D-Link DIR-140L, DIR-640L devices allows remote unauthenticated attackers to discover admin credentials.

spaces.htm on multiple D-Link devices (DSL, DIR, DWR) allows remote unauthenticated attackers to discover admin credentials.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. Device passwords, such as the admin password and the WPA key, are stored in cleartext.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. One can bypass authentication mechanisms to download the configuration file.

Directory traversal vulnerability in the web interface on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices allows remote attackers to read arbitrary files via a /.. or // after "GET /uir" in an HTTP request. NOTE: this vulnerability exists because of an incorrect fix for CVE-2017-6190.

An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access.

An information disclosure in web interface in D-Link DIR-X1860 before 1.03 RevA1 allows a remote unauthenticated attacker to send a specially crafted HTTP request and gain knowledge of different absolute paths that are being used by the web application.

Local File Inclusion due to path traversal in D-Link DAP-1620 leads to unauthorized internal files reading [/etc/passwd] and [/etc/shadow].

An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

An informtion disclosure issue exists in D-LINK-DIR-605 B2 Firmware Version : 2.01MT. An attacker can obtain a user name and password by forging a post request to the / getcfg.php page

D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered on D-Link DCS-1130 devices. The device requires that a user logging to the device to provide a username and password. However, the device does not enforce the same restriction on a specific URL thereby allowing any attacker in possession of that to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic.

Directory traversal vulnerability in the web interface on the D-Link DWR-116 device with firmware before V1.05b09 allows remote attackers to read arbitrary files via a .. (dot dot) in a "GET /uir/" request.

D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Information Disclosure attacks via unspecified vectors.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials.

D-Link DIR-610 devices allow Information Disclosure via SERVICES=DEVICE.ACCOUNT%0AAUTHORIZED_GROUP=1 to getcfg.php. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. Lack of authentication functionality allows an attacker to assign a static IP address that was once used by a valid user.

register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services.

D-Link - CWE-288:Authentication Bypass Using an Alternate Path or Channel

In D-link DIR-816 A2_v1.10CNB04.img,the network can be reset without authentication via /goform/setMAC.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.

D-Link G416 httpd Missing Authentication for Critical Function Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to gain access to critical functions on the device. Was ZDI-CAN-21287.

There are some web interfaces without authentication requirements on D-Link DIR-868L B1-2.03 and DIR-817LW A1-1.04 routers. An attacker can get the router's username and password (and other information) via a DEVICE.ACCOUNT value for SERVICES in conjunction with AUTHORIZED_GROUP=1%0a to getcfg.php. This could be used to control the router remotely.

D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

Missing authentication for critical function in DAP-1880AC firmware version 1.21 and earlier allows a remote attacker to login to the device as an authenticated user without the access privilege via unspecified vectors.

D-Link D-View shutdown_coreserver Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the shutdown_coreserver action. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-19572.