Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Secure Boot functionality and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to insufficient verification of modules in the software load process. An attacker could exploit this vulnerability by manipulating the loaded binaries to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: This vulnerability affects Cisco IOS XR Software, not the Secure Boot feature. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software image. The vulnerability is due to insufficient NX-OS signature verification for software images. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software image on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf25045, CSCvf31495.

A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655.

A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.

Multiple vulnerabilities in image verification checks of Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for Cisco 8000 Series Routers could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by loading an unsigned software patch on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability is due to improper verification of digital signatures for software images. An attacker could exploit this vulnerability by loading an unsigned software image on an affected device. A successful exploit could allow the attacker to boot a malicious software image. Note: The fix for this vulnerability requires a BIOS upgrade as part of the software upgrade. For additional information, see the Details section of this advisory. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 9000 Series Fabric Switches in ACI Mode are affected running software versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5).

A vulnerability in the CLI implementation of a specific command used for image maintenance for Cisco NX-OS Software could allow an authenticated, local attacker to overwrite any file on the file system including system files. These file overwrites by the attacker are accomplished at the root privilege level. The vulnerability occurs because there is no verification of user-input parameters and or digital-signature verification for image files when using a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device and issuing a command at the CLI. Because an exploit could allow the attacker to overwrite any file on the disk, including system files, a denial of service (DoS) condition could occur. The attacker must have valid administrator credentials for the affected device to exploit this vulnerability.

Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the upgrade component of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to install a malicious file when upgrading. The vulnerability is due to insufficient signature validation. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to upload crafted code to the affected device.

A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install a malicious software image or file on an affected device. The vulnerability is due to the affected software improperly verifying digital signatures for software images and files that are uploaded to a device. An attacker could exploit this vulnerability by uploading a malicious software image or file to an affected device. A successful exploit could allow the attacker to bypass digital signature verification checks for software images and files and install a malicious software image or file on the affected device.

A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install and boot a malicious software image or execute unsigned binaries on an affected device. The vulnerability exists because, under certain circumstances, an affected device can be configured to not verify the digital signatures of system image files during the boot process. An attacker could exploit this vulnerability by abusing a specific feature that is part of the device boot process. A successful exploit could allow the attacker to install and boot a malicious software image or execute unsigned binaries on the targeted device.

A vulnerability in Cisco NX-OS Software and Cisco IOS XE Software could allow an authenticated, local attacker with valid administrator or privilege level 15 credentials to load a virtual service image and bypass signature verification on an affected device. The vulnerability is due to improper signature verification during the installation of an Open Virtual Appliance (OVA) image. An authenticated, local attacker could exploit this vulnerability and load a malicious, unsigned OVA image on an affected device. A successful exploit could allow an attacker to perform code execution on a crafted software OVA image.

A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765.

Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. ERP

A vulnerability in the CLI of Cisco APIC could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by logging in to the device CLI with valid administrative (level 15) credentials and using crafted commands at the CLI prompt. A successful exploit could allow the attacker to execute arbitrary commands as root.

A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR image signature verification and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to incomplete validation of files in the boot verification process. An attacker could exploit this vulnerability by manipulating the system configuration options to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

A vulnerability in the implementation of the remote access functionality of Cisco AsyncOS Software for Cisco Secure Email and Web Manager, Cisco Secure Email Gateway, and Cisco Secure Web Appliance could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. This vulnerability is due to an architectural flaw in the password generation algorithm for the remote access functionality. An attacker could exploit this vulnerability by generating a temporary password for the service account. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. Note: The Security Impact Rating (SIR) for this vulnerability is Medium due to the unrestricted scope of information that is accessible to an attacker.

A vulnerability in Cisco Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. This vulnerability is due to insufficient restrictions during the execution of specific CLI commands. An attacker could exploit this vulnerability by logging in to the Cisco Spaces Connector CLI as the spacesadmin user and executing a specific command with crafted parameters. A successful exploit could allow the attacker to elevate privileges from the spacesadmin user and execute arbitrary commands on the underlying operating system as root.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to improper validation of software packages. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this vulnerability allows an attacker to bypass a major security feature of a device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the web-based management interface of Cisco Unified CCX could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper limitation of a pathname to a restricted directory (path traversal). An attacker could exploit this vulnerability by sending a crafted web request to an affected device, followed by a specific command through an SSH session. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of an affected device as a low-privilege user. A successful exploit could also allow the attacker to undertake further actions to elevate their privileges to root.

A vulnerability in the CLI of multiple Cisco Unified Communications products could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. This vulnerability is due to improper validation of user-supplied command arguments. An attacker could exploit this vulnerability by executing crafted commands on the CLI of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. To exploit this vulnerability, the attacker must have valid administrative credentials.

Cisco Unified IP Phones 9900 series devices with firmware 9.1 and 9.2 do not properly handle downloads of configuration information to an RT phone, which allows local users to gain privileges via unspecified injected data, aka Bug ID CSCts32237.

A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198.

An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation during the installation of a software patch. An attacker could exploit this vulnerability by installing a crafted patch image with the vulnerable operation occurring prior to patch activation. An exploit could allow the attacker to execute arbitrary commands on an affected system as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf23735, CSCvg04072.

A vulnerability in the CLI of Cisco UCS Central Software could allow an authenticated, local attacker to gain shell access. The vulnerability is due to insufficient input validation of commands entered in the CLI, aka a Restricted Shell Break Vulnerability. An attacker could exploit this vulnerability by entering a specific command with crafted arguments. An exploit could allow the attacker to gain shell access to the underlying system. Cisco Bug IDs: CSCve70762.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, and Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99925, CSCvf15164, CSCvf15167, CSCvf15170, CSCvf15173.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

A vulnerability in certain system script files that are installed at boot time on Cisco Application Policy Infrastructure Controllers could allow an authenticated, local attacker to gain elevated privileges and execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-controlled input that is supplied to certain script files of an affected system. An attacker could exploit this vulnerability by submitting crafted input to a script file on an affected system. A successful exploit could allow the attacker to gain elevated privileges and execute arbitrary commands with root privileges on the affected system. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf57274.

A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785.