A vulnerability in the Secure Shell (SSH) session management for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the SSH process is not properly deleted when an SSH connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly opening SSH connections to an affected device. A successful exploit could allow the attacker to exhaust system resources by initiating multiple SSH connections to the device that are not effectively terminated, which could result in a DoS condition.

A vulnerability in the Point-to-Point Tunneling Protocol (PPTP) VPN packet processing functionality in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected AP. An attacker could exploit this vulnerability by associating to a vulnerable AP, initiating a PPTP VPN connection to an arbitrary PPTP VPN server, and sending a malicious GRE frame through the data plane of the AP. A successful exploit could allow the attacker to cause an internal process of the targeted AP to crash, which in turn would cause the AP to reload. The AP reload would cause a DoS condition for clients that are associated with the AP.

Multiple vulnerabilities in the video service of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by sending crafted traffic to the video service of an affected endpoint. A successful exploit could allow the attacker to cause the video service to crash, resulting in a DoS condition on an affected device.

A vulnerability in the web interface of Cisco Wireless LAN Controller Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists due to a failure of the HTTP parsing engine to handle specially crafted URLs. An attacker could exploit this vulnerability by authenticating with low privileges to an affected controller and submitting the crafted URL to the web interface of the affected device. Conversely, an unauthenticated attacker could exploit this vulnerability by persuading a user of the web interface to click the crafted URL. A successful exploit could allow the attacker to cause an unexpected restart of the device, resulting in a DoS condition.

A vulnerability in the Decrypt for End-User Notification configuration parameter of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to connect to a secure website over Secure Sockets Layer (SSL) or Transport Layer Security (TLS), even if the WSA is configured to block connections to the website. Affected Products: This vulnerability affects Cisco Web Security Appliances if the HTTPS decryption options are enabled and configured for the device to block connections to certain websites. More Information: CSCvb49012. Known Affected Releases: 9.0.1-162 9.1.1-074.

A vulnerability in the Cisco Nexus 9000 Series Fabric Switches running in Application-Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected device. The vulnerability is due to a lack of proper input and validation checking mechanisms of user-supplied input sent to an affected device. A successful exploit could allow the attacker unauthorized access to read arbitrary files on an affected device. This vulnerability has been fixed in version 14.0(1h).

Multiple vulnerabilities in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to overwrite arbitrary files. The vulnerabilities are due to insufficient permission enforcement. An attacker could exploit these vulnerabilities by authenticating as the remote support user and submitting malicious input to specific commands. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying filesystem. The attacker has no control over the contents of the data written to the file. Overwriting a critical file could cause the device to crash, resulting in a denial of service condition (DoS).

A vulnerability in the REST API of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network Manager (EPNM) could allow an unauthenticated remote attacker to execute arbitrary code with root privileges on the underlying operating system. The vulnerability is due to insufficient input validation during the initial High Availability (HA) configuration and registration process of an affected device. An attacker could exploit this vulnerability by uploading a malicious file during the HA registration period. A successful exploit could allow the attacker to execute arbitrary code with root-level privileges on the underlying operating system. Note: This vulnerability can only be exploited during the HA registration period. See the Details section for more information.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system. When processed, the commands will be executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by providing malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as the root user.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.

Cisco IP Phone 7940 and 7960 with P0S3-08-6-00 firmware, and other SIP firmware before 8.7(0), allows remote attackers to cause a denial of service (device reboot) via (1) a certain sequence of 10 invalid SIP INVITE and OPTIONS messages; or (2) a certain invalid SIP INVITE message that contains a remote tag, followed by a certain set of two related SIP OPTIONS messages.

A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on an affected system. The vulnerability exists because the affected system does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to a user of the web application. A successful exploit could allow the attacker to access the system and perform unauthorized actions.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Java deserialization function used by Cisco Security Manager could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary commands on the device with the privileges of casuser.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

A vulnerability in the Sender Policy Framework (SPF) functionality of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the configured user filters on an affected device. The vulnerability exists because the affected software insufficiently validates certain incoming SPF messages. An attacker could exploit this vulnerability by sending a custom SPF packet to an affected device. A successful exploit could allow the attacker to bypass the configured header filters, which could allow malicious content to pass through the device.

A vulnerability in Cisco Jabber Client Framework (JCF) for Mac Software, installed as part of the Cisco Jabber for Mac client, could allow an authenticated, local attacker to execute arbitrary code on an affected device The vulnerability is due to improper file level permissions on an affected device when it is running Cisco JCF for Mac Software. An attacker could exploit this vulnerability by authenticating to the affected device and executing arbitrary code or potentially modifying certain configuration files. A successful exploit could allow the attacker to execute arbitrary code or modify certain configuration files on the device using the privileges of the installed Cisco JCF for Mac Software.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol.

A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the command line interface (CLI) of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker with administrative privileges to execute commands on the underlying operating system with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by executing a specific CLI command that includes crafted arguments. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

A vulnerability in the content filtering functionality of Cisco AsyncOS Software for Cisco Email Security Appliances and Cisco Web Security Appliances could allow an unauthenticated, remote attacker to bypass user filters that are configured for an affected device. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for both virtual and hardware versions of the following Cisco products: Cisco Email Security Appliances (ESAs) that are configured to use message or content filters that scan incoming email attachments; Cisco Web Security Appliances (WSAs) that are configured to use services that scan accessed web content. More Information: CSCva90076, CSCvb06764. Known Affected Releases: 10.0.0-125 8.5.7-042 9.7.2-047.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on a targeted system. The vulnerability is due to improper validation of user-supplied input on the affected system. An attacker could exploit this vulnerability by sending the user of the web application a crafted request. If the request is processed, the attacker could access the system and perform unauthorized actions.

A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the file and malware inspection feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass the file and malware inspection policies on an affected system. The vulnerability exists because the affected software insufficiently validates incoming traffic. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to bypass the file and malware inspection policies and send malicious traffic through the affected device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device.

A vulnerability in the Layer 3 multicast feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 multicast packets that are received on line cards where the interface has either an IPv4 access control list (ACL) or a QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 multicast packets through an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset. Traffic over that line card would be lost while the line card reloads.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted PIM packet to an affected device. A successful exploit could allow the attacker to cause a traffic loop, resulting in a DoS condition.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the PDF parsing module in Clam AntiVirus (ClamAV) Software versions 0.103.0 and 0.103.1 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper buffer size tracking that may result in a heap buffer over-read. An attacker could exploit this vulnerability by sending a crafted PDF file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to crash, resulting in a denial of service condition.

A vulnerability in Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization checking and gain restricted access to the configuration information of an affected system. This vulnerability exists because the affected software has insufficient input validation for certain commands. An attacker could exploit this vulnerability by sending crafted requests to the affected commands of an affected system. A successful exploit could allow the attacker to bypass authorization checking and gain restricted access to the configuration data of the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Secure Access Control Server (ACS) Solution Engine 5.7(0.15) allows remote authenticated users to cause a denial of service (SSH screen process crash) via crafted (1) CLI or (2) GUI commands, aka Bug ID CSCuw24694.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for MacOS, and Cisco Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system with elevated privileges, access sensitive information, intercept protected network traffic, or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to elevate privileges on an affected system. To exploit this vulnerability, an attacker would need to have a valid Administrator account on an affected system. The vulnerability is due to incorrect privilege assignment. An attacker could exploit this vulnerability by logging in to an affected system with an Administrator account and creating a malicious file, which the system would parse at a later time. A successful exploit could allow the attacker to obtain root privileges on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.