Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used."
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
Istio before 1.1.13 and 1.2.x before 1.2.4 mishandles regular expressions for long URIs, leading to a denial of service during use of the JWT, VirtualService, HTTPAPISpecBinding, or QuotaSpecBinding API.
Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, `istiod`, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing. This endpoint is served over TLS port 15012, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [multicluster](https://istio.io/latest/docs/setup/install/multicluster/primary-remote/) topologies, this port is exposed over the public internet. There are no effective workarounds, beyond upgrading. Limiting network access to Istiod to the minimal set of clients can help lessen the scope of the vulnerability to some extent.
Istio is an open platform-independent service mesh that provides traffic management, policy enforcement, and telemetry collection. Prior to versions 1.15.2, 1.14.5, and 1.13.9, the Istio control plane, istiod, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted or oversized message which results in the control plane crashing when the Kubernetes validating or mutating webhook service is exposed publicly. This endpoint is served over TLS port 15017, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially external istiod topologies, this port is exposed over the public internet. Versions 1.15.2, 1.14.5, and 1.13.9 contain patches for this issue. There are no effective workarounds, beyond upgrading. This bug is due to an error in `regexp.Compile` in Go.
Istio before 1.2.2 mishandles certain access tokens, leading to "Epoch 0 terminated with an error" in Envoy. This is related to a jwt_authenticator.cc segmentation fault.
Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, istiod, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing when the validating webhook for a cluster is exposed publicly. This endpoint is served over TLS port 15017, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [external istiod](https://istio.io/latest/docs/setup/install/external-controlplane/) topologies, this port is exposed over the public internet. This issue has been patched in versions 1.13.2, 1.12.5 and 1.11.8. Users are advised to upgrade. Users unable to upgrade should disable access to a validating webhook that is exposed to the public internet or restrict the set of IP addresses that can query it to a set of known, trusted entities.
Istio 1.4.x before 1.4.9 and Istio 1.5.x before 1.5.4 contain the following vulnerability when telemetry v2 is enabled: by sending a specially crafted packet, an attacker could trigger a Null Pointer Exception resulting in a Denial of Service. This could be sent to the ingress gateway or a sidecar, triggering a null pointer exception which results in a denial of service. This also affects servicemesh-proxy where a null pointer exception flaw was found in servicemesh-proxy. When running Telemetry v2 (not on by default in version 1.4.x), an attacker could send a specially crafted packet to the ingress gateway or proxy sidecar, triggering a denial of service.
A memory exhaustion vulnerability exists in Asterisk Open Source 13.x before 13.15.1 and 14.x before 14.4.1 and Certified Asterisk 13.13 before 13.13-cert4, which can be triggered by sending specially crafted SCCP packets causing an infinite loop and leading to memory exhaustion (by message logging in that loop).
XML External Entity vulnerability in libexpat 2.2.0 and earlier (Expat XML Parser Library) allows attackers to put the parser in an infinite loop using a malformed external entity definition from an external DTD.
Incorrect interaction of the parse_packet() and parse_part_sign_sha256() functions in network.c in collectd 5.7.1 and earlier allows remote attackers to cause a denial of service (infinite loop) of a collectd instance (configured with "SecurityLevel None" and with empty "AuthFile" options) via a crafted UDP packet.
crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue.
It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.
Unisys ClearPath MCP TCP/IP Networking Services 59.1, 60.0, and 62.0 has an Infinite Loop.
The tcp_splice_read function in net/ipv4/tcp.c in the Linux kernel before 4.9.11 allows remote attackers to cause a denial of service (infinite loop and soft lockup) via vectors involving a TCP packet with the URG flag.
In Wireshark 2.2.0 to 2.2.3 and 2.0.0 to 2.0.9, the ASTERIX dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-asterix.c by changing a data type to avoid an integer overflow.
Memory Exhaustion vulnerability in ONLYOFFICE Document Server 4.0.3 through 7.3.2 allows remote attackers to cause a denial of service via crafted JavaScript file.
Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.
A denial-of-service vulnerability exists in the processing of multi-part/form-data requests in the base GoAhead web server application in versions v5.0.1, v.4.1.1 and v3.6.5. A specially crafted HTTP request can lead to an infinite loop in the process. The request can be unauthenticated in the form of GET or POST requests and does not require the requested resource to exist on the server.
An issue was discovered in MediaWiki through 1.36.2. A parser function related to loop control allowed for an infinite loop (and php-fpm hang) within the Loops extension because egLoopsCountLimit is mishandled. This could lead to memory exhaustion.
It was found in Undertow before 1.3.28 that with non-clean TCP close, the Websocket server gets into infinite loop on every IO thread, effectively causing DoS.
sigstore-go, a Go library for Sigstore signing and verification, is susceptible to a denial of service attack in versions prior to 0.6.1 when a verifier is provided a maliciously crafted Sigstore Bundle containing large amounts of verifiable data, in the form of signed transparency log entries, RFC 3161 timestamps, and attestation subjects. The verification of these data structures is computationally expensive. This can be used to consume excessive CPU resources, leading to a denial of service attack. TUF's security model labels this type of vulnerability an "Endless data attack," and can lead to verification failing to complete and disrupting services that rely on sigstore-go for verification. This vulnerability is addressed with sigstore-go 0.6.1, which adds hard limits to the number of verifiable data structures that can be processed in a bundle. Verification will fail if a bundle has data that exceeds these limits. The limits are 32 signed transparency log entries, 32 RFC 3161 timestamps, 1024 attestation subjects, and 32 digests per attestation subject. These limits are intended to be high enough to accommodate the vast majority of use cases, while preventing the verification of maliciously crafted bundles that contain large amounts of verifiable data. Users who are vulnerable but unable to quickly upgrade may consider adding manual bundle validation to enforce limits similar to those in the referenced patch prior to calling sigstore-go's verification functions.
Webmin before 2.202 and Virtualmin before 7.20.2 allow a network traffic loop via spoofed UDP packets on port 10000.
It was found that when Keycloak before 2.5.5 receives a Logout request with a Extensions in the middle of the request, the SAMLSloRequestParser.parse() method ends in a infinite loop. An attacker could use this flaw to conduct denial of service attacks.
NLnet Labs Routinator prior to 0.10.2 happily processes a chain of RRDP repositories of infinite length causing it to never finish a validation run. In RPKI, a CA can choose the RRDP repository it wishes to publish its data in. By continuously generating a new child CA that only consists of another CA using a different RRDP repository, a malicious CA can create a chain of CAs of de-facto infinite length. Routinator prior to version 0.10.2 did not contain a limit on the length of such a chain and will therefore continue to process this chain forever. As a result, the validation run will never finish, leading to Routinator continuing to serve the old data set or, if in the initial validation run directly after starting, never serve any data at all.
In Pylons Colander through 1.6, the URL validator allows an attacker to potentially cause an infinite loop thereby causing a denial of service via an unclosed parenthesis.
A Denial of Service (infinite loop) exists in OpenSIPS before 1.10 in lookup.c.
USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products.
Crash in the RFC 7468 dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
Infinite loop in the RTMPT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.
Apache Tomcat 8.5.0 to 8.5.63, 9.0.0-M1 to 9.0.43 and 10.0.0-M1 to 10.0.2 did not properly validate incoming TLS packets. When Tomcat was configured to use NIO+OpenSSL or NIO2+OpenSSL for TLS, a specially crafted packet could be used to trigger an infinite loop resulting in a denial of service.
The receive_msg function in receive.c in the SMTP daemon in Exim 4.88 and 4.89 allows remote attackers to cause a denial of service (infinite loop and stack exhaustion) via vectors involving BDAT commands and an improper check for a '.' character signifying the end of the content, related to the bdat_getc function.
Infinite loop in the BitTorrent DHT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
An exploitable denial-of-service vulnerability exists in the Dicom-packet parsing functionality of LEADTOOLS libltdic.so version 20.0.2019.3.15. A specially crafted packet can cause an infinite loop, resulting in a denial of service. An attacker can send a packet to trigger this vulnerability.
The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service.
The RemoteAddr and LocalAddr methods on the returned net.Conn may call themselves, leading to an infinite loop which will crash the program due to a stack overflow.
An improperly performed length calculation on a buffer in PlaintextRecordLayer could lead to an infinite loop and denial-of-service based on user input. This issue affected versions of fizz prior to v2019.03.04.00.
Windows Standards-Based Storage Management Service Denial of Service Vulnerability
In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.
An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.
jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes.
A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.
The RESP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-resp.c:resp_get_length().
In parseUriInternal of Intent.java, there is a possible infinite loop due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.
An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).
EDK2's Network Package is susceptible to an infinite lop vulnerability when parsing a PadN option in the Destination Options header of IPv6. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Availability.
In Poppler 0.59.0, memory corruption occurs in a call to Object::streamGetChar in Object.h after a repeating series of Gfx::display, Gfx::go, Gfx::execOp, Gfx::opShowText, and Gfx::doShowText calls (aka a Gfx.cc infinite loop).
aspnet_wp.exe in Microsoft ASP.NET web services allows remote attackers to cause a denial of service (CPU consumption from infinite loop) via a crafted SOAP message to an RPC/Encoded method.
An issue was discovered in ApiPageSet.php in MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. It allows attackers to cause a denial of service (unbounded loop and RequestTimeoutException) when querying pages redirected to other variants with redirects and converttitles set.