An issue was discovered in Grafana Cortex through 1.9.0. The header value X-Scope-OrgID is used to construct file paths for rules files, and if crafted to conduct directory traversal such as ae ../../sensitive/path/in/deployment pathname, then Cortex will attempt to parse a rules file at that location and include some of the contents in the error message. (Other Cortex API requests can also be sent a malicious OrgID header, e.g., tricking the ingester into writing metrics to a different location, but the effect is nuisance rather than information disclosure.)

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. The vulnerability allows unauthorized access to the sensitive settings exposed by /api/v1/settings endpoint without authentication. All sensitive settings are hidden except passwordPattern. This vulnerability is fixed in 2.11.3, 2.10.12, and 2.9.17.

Spinnaker is an open source, multi-cloud continuous delivery platform. Log output when updating GitHub status is improperly set to FULL always. It's recommended to apply the patch and rotate the GitHub token used for github status notifications. Given that this would output github tokens to a log system, the risk is slightly higher than a "low" since token exposure could grant elevated access to repositories outside of control. If using READ restricted tokens, the exposure is such that the token itself could be used to access resources otherwise restricted from reads. This only affects users of GitHub Status Notifications. This issue has been addressed in pull request 1316. Users are advised to upgrade. Users unable to upgrade should disable GH Status Notifications, Filter their logs for Echo log data and use read-only tokens that are limited in scope.

In Harbor 2.0 before 2.0.5 and 2.1.x before 2.1.2 the catalog’s registry API is exposed on an unauthenticated path.

The conformance validation endpoint is public so everybody can verify the conformance of onboarded services. The response could contain specific information about the service, including available endpoints, and swagger. It could advise about the running version of a service to an attacker. The attacker could also check if a service is running.

The health endpoint is public so everybody can see a list of all services. It is potentially valuable information for attackers.

An issue was discovered in FRRouting FRR (aka Free Range Routing) through 7.3.1. When using the split-config feature, the init script creates an empty config file with world-readable default permissions, leading to a possible information leak via tools/frr.in and tools/frrcommon.sh.in. NOTE: some parties consider this user error, not a vulnerability, because the permissions are under the control of the user before any sensitive information is present in the file

The odl-mdsal-apidocs feature in OpenDaylight Helium allow remote attackers to obtain sensitive information by leveraging missing AAA restrictions.

IBM TXSeries for Multiplatforms 9.1 and 11.1 could allow an attacker to enumerate usernames due to an observable login attempt response discrepancy.

User Enumeration via Discrepancies in Error Messages in the Celk Sistemas Celk Saude v.3.1.252.1 password recovery functionality which allows a remote attacker to enumerate users through discrepancies in the responses.

A vulnerability has been identified in Polarion V2310 (All versions), Polarion V2404 (All versions < V2404.2). The login implementation of the affected application contains an observable response discrepancy vulnerability when validating usernames. This could allow an unauthenticated remote attacker to distinguish between valid and invalid usernames.

Loway - CWE-204: Observable Response Discrepancy

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

Kaiten 57.128.8 allows remote attackers to enumerate user accounts via a crafted POST request, because a login response contains a user_email field only if the user account exists.

web-auth/webauthn-lib is an open source set of PHP libraries and a Symfony bundle to allow developers to integrate that authentication mechanism into their web applications. The ProfileBasedRequestOptionsBuilder method returns allowedCredentials without any credentials if no username was found. When WebAuthn is used as the first or only authentication method, an attacker can enumerate usernames based on the absence of the `allowedCredentials` property in the assertion options response. This allows enumeration of valid or invalid usernames. By knowing which usernames are valid, attackers can focus their efforts on a smaller set of potential targets, increasing the efficiency and likelihood of successful attacks. This issue has been addressed in version 4.9.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

An issue was discovered in Logpoint before 7.4.0. An attacker can enumerate a valid list of usernames by observing the response time at the Forgot Password endpoint.

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

User enumeration vulnerability in Devklan's Alma Blog that affects versions 2.1.10 and earlier. This vulnerability could allow a remote user to retrieve all valid users registered in the application just by looking at the request response.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

User enumeration vulnerability in Arconte Áurea 1.5.0.0 version. The exploitation of this vulnerability could allow an attacker to obtain a list of registered users in the application, obtaining the necessary information to perform more complex attacks on the platform.

IBM Aspera Faspex 5.0.0 through 5.0.10 could disclose sensitive username information due to an observable response discrepancy.

Observable Response Discrepancy in the SICK ICR890-4 could allow a remote attacker to identify valid usernames for the FTP server from the response given during a failed login attempt.

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.17.0 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.12 (All versions < V10.12.11 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.6 (All versions < V10.6.19 only if the basic authentication mechanism is used by the application), Mendix Runtime V8 (All versions < V8.18.33 only if the basic authentication mechanism is used by the application), Mendix Runtime V9 (All versions < V9.24.31 only if the basic authentication mechanism is used by the application). The authentication mechanism of affected applications contains an observable response discrepancy vulnerability when validating usernames. This could allow unauthenticated remote attackers to distinguish between valid and invalid usernames.

When supplied with a random MAC address, Snap One OvrC cloud servers will return information about the device. The MAC address of devices can be enumerated in an attack and the OvrC cloud will disclose their information.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 authentication process response indicates and validates the existence of a username. This may allow an attacker to enumerate different user accounts.

IBM Aspera Orchestrator 4.0.1 could allow a remote attacker to enumerate usernames due to observable response discrepancies. IBM X-Force ID: 248545.

A vulnerability has been identified in Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.1), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.1), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.1.1). The affected versions of the module contain an observable response discrepancy issue that could allow an attacker to retrieve sensitive information.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows an unauthenticated, remote attacker to query the /App/CreateRequest.aspx endpoint to check for the existence of valid usernames. There are no rate-limiting mechanisms in place.

Observable Response Discrepancy in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to gain information about valid usernames by analyzing challenge responses from the server via the REST interface.

Tuleap is an Open Source Suite created to facilitate management of software development and collaboration. In Tuleap Community Edition prior to version 16.9.99.1750843170 and Tuleap Enterprise Edition prior to 16.8-4 and 16.9-2, the forgot password form allows for user enumeration. This is fixed in Tuleap Community Edition version 16.9.99.1750843170 and Tuleap Enterprise Edition 16.8-4 and 16.9-2.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Observable Response Discrepancy vulnerability in Tridium Niagara Framework on Windows, Linux, QNX, Tridium Niagara Enterprise Security on Windows, Linux, QNX allows Cryptanalysis. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11.Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

A user enumeration vulnerability exists in the login functionality of Ghost Foundation Ghost 5.9.4. A specially-crafted HTTP request can lead to a disclosure of sensitive information. An attacker can send a series of HTTP requests to trigger this vulnerability.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

vantage6 is a privacy preserving federated learning infrastructure for secure insight exchange. vantage6 does not inform the user of wrong username/password combination if the username actually exists. This is an attempt to prevent bots from obtaining usernames. However, if a wrong password is entered a number of times, the user account is blocked temporarily. This issue has been fixed in version 3.8.0.

Kirby is a Content Management System. Prior to versions 3.5.8.2, 3.6.6.2, 3.7.5.1, and 3.8.1, a user enumeration vulnerability affects all Kirby sites with user accounts unless Kirby's API and Panel are disabled in the config. It can only be exploited for targeted attacks because the attack does not scale to brute force. The problem has been patched in Kirby 3.5.8.2, Kirby 3.6.6.2, Kirby 3.7.5.1, and Kirby 3.8.1. In all of the mentioned releases, the maintainers have rewritten the affected code so that the delay is also inserted after the brute force limit is reached.

Umbraco is a free and open source .NET content management system. Prior to versions 10.8.10 and 13.8.1, based on an analysis of the timing of post login API responses, it's possible to determine whether an account exists. The issue is patched in versions 10.8.10 and 13.8.1. No known workarounds are available.

A Observable Response Discrepancy vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to discover valid usernames. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46-1. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37-1.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

Zitadel is open-source identity infrastructure software. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". While the setting was correctly respected during the login flow, the user's username was normalized leading to a disclosure of the user's existence. This vulnerability is fixed in 2.71.6, 2.70.8, 2.69.9, 2.68.9, 2.67.13, 2.66.16, 2.65.7, 2.64.6, and 2.63.9.

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.21.0), Mendix Runtime V10.12 (All versions < V10.12.16), Mendix Runtime V10.18 (All versions < V10.18.5), Mendix Runtime V10.6 (All versions < V10.6.22), Mendix Runtime V8 (All versions < V8.18.35), Mendix Runtime V9 (All versions < V9.24.34). Affected applications allow for entity enumeration due to distinguishable responses in certain client actions. This could allow an unauthenticated remote attacker to list all valid entities and attribute names of a Mendix Runtime-based application.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

A vulnerability in the login functionality of the web application of ctrlX OS allows a remote unauthenticated attacker to guess valid usernames via multiple crafted HTTP requests.

SAP NetWeaver Server ABAP allows an unauthenticated attacker to exploit a vulnerability that causes the server to respond differently based on the existence of a specified user, potentially revealing sensitive information. This issue does not enable data modification and has no impact on server availability.