The gadgets-integration API in Cisco Finesse 8.5(1) through 8.5(5), 8.6(1), 9.0(1), 9.0(2), 9.1(1), 9.1(1)SU1, 9.1(1)SU1.1, 9.1(1)ES1 through 9.1(1)ES5, 10.0(1), 10.0(1)SU1, 10.0(1)SU1.1, 10.5(1), 10.5(1)ES1 through 10.5(1)ES4, 10.5(1)SU1, 10.5(1)SU1.1, 10.5(1)SU1.7, 10.6(1), 10.6(1)SU1, 10.6(1)SU2, and 11.0(1) allows remote attackers to conduct server-side request forgery (SSRF) attacks via a crafted request, aka Bug ID CSCuw86623.

The Wireless Session Protocol (WSP) feature in the Gateway GPRS Support Node (GGSN) component on Cisco ASR 5000 series devices allows remote attackers to bypass intended Top-Up payment restrictions via unspecified WSP packets, aka Bug ID CSCuh28371.

Unspecified vulnerability in the SSL certificate checking functionality in Cisco CiscoWorks Management Center for IDS Sensors (IDSMC) 2.0 and 2.1, and Monitoring Center for Security (Security Monitor or Secmon) 1.1 through 2.0 and 2.1, allows remote attackers to spoof a Cisco Intrusion Detection Sensor (IDS) or Intrusion Prevention System (IPS).

The proxy engine in Cisco Advanced Malware Protection (AMP), when used with Email Security Appliance (ESA) 9.5.0-201, 9.6.0-051, and 9.7.0-125, allows remote attackers to bypass intended content restrictions via a malformed e-mail message containing an encoded file, aka Bug ID CSCux45338.

Cisco 1200, 1131, and 1240 series Access Points, when operating in Lightweight Access Point Protocol (LWAPP) mode and controlled by 2000 and 4400 series Airespace WLAN controllers running 3.1.59.24, allow remote attackers to send unencrypted traffic to a secure network using frames with the MAC address of an authenticated end host.

Cisco NX-OS on the Nexus 1000V does not properly handle authentication for Virtual Ethernet Module (VEM) to Virtual Supervisor Module (VSM) communication, which allows remote attackers to obtain VEM access via (1) spoofed STUN packets or (2) a crafted VMware ESXi instance, aka Bug ID CSCud14832.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy that is intended to drop the Server Message Block Version 2 (SMB2) and SMB Version 3 (SMB3) protocols if malware is detected. The vulnerability is due to incorrect detection of an SMB2 or SMB3 file based on the total file length. An attacker could exploit this vulnerability by sending a crafted SMB2 or SMB3 transfer request through the targeted device. An exploit could allow the attacker to pass SMB2 or SMB3 files that could be malware even though the device is configured to block them. This vulnerability does not exist for SMB Version 1 (SMB1) files. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvg68807.

A vulnerability in the detection engine of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the transfer of files to an affected system via FTP. The vulnerability exists because the affected software incorrectly handles FTP control connections. An attacker could exploit this vulnerability by sending a maliciously crafted FTP connection to transfer a file to an affected device. A successful exploit could allow the attacker to bypass a file policy that is configured to apply the Block upload with reset action to FTP traffic. Cisco Bug IDs: CSCvh70130.

The encryption functionality in the Virtual Supervisor Module (VSM) to Virtual Ethernet Module (VEM) communication component in Cisco NX-OS on the Nexus 1000V does not properly authenticate VSM/VEM packets, which allows remote attackers to disable packet-level encryption and integrity protection via crafted packets, aka Bug ID CSCud14710.

Cisco VACM (View-based Access Control MIB) for Catalyst Operating Software (CatOS) 5.5 and 6.1 and IOS 12.0 and 12.1 allows remote attackers to read and modify device configuration via the read-write community string.

Cisco FireSIGHT Management Center allows remote attackers to bypass the HTTP attack detection feature and avoid triggering Snort IDS rules via an SSL session that is mishandled after decryption, aka Bug ID CSCux53437.

Cisco TelePresence Video Communication Server (VCS) X7.0.3 does not properly process certain search rules, which allows remote attackers to create conferences via an unspecified Conductor request, aka Bug ID CSCub67989.

Cisco ONS 15327 before 4.1(3), ONS 15454 before 4.6(1), ONS 15454 SD before 4.1(3), and Cisco ONS 15600 before 1.3(0) enable TFTP service on UDP port 69 by default, which allows remote attackers to GET or PUT ONS system files on the current active TCC in the /flash0 or /flash1 directories.

The Cisco Media Gateway Controller (MGC) in (1) SC2200 7.4 and earlier, (2) VSC3000 9.1 and earlier, (3) PGW 2200 9.1 and earlier, (4) Billing and Management Server (BAMS) and (5) Voice Services Provisioning Tool (VSPT) runs on default installations of Solaris 2.6 with unnecessary services and without the latest security patches, which allows attackers to exploit known vulnerabilities.

Cisco IOS software 11.3 through 12.2 running on Cisco uBR7200 and uBR7100 series Universal Broadband Routers allows remote attackers to modify Data Over Cable Service Interface Specification (DOCSIS) settings via a DOCSIS file without a Message Integrity Check (MIC) signature, which is approved by the router.

A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

A vulnerability in the web-based management interface of Cisco HyperFlex HX Data Platform could allow an unauthenticated, remote attacker to upload files to an affected device. This vulnerability is due to missing authentication for the upload function. An attacker could exploit this vulnerability by sending a specific HTTP request to an affected device. A successful exploit could allow the attacker to upload files to the affected device with the permissions of the tomcat8 user.

Multiple Cisco products are affected by a vulnerability with TCP Fast Open (TFO) when used in conjunction with the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect detection of the HTTP payload if it is contained at least partially within the TFO connection handshake. An attacker could exploit this vulnerability by sending crafted TFO packets with an HTTP payload through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload.

Cisco IOS 15.2(04)M6 and 15.4(03)S lets physical-interface ACLs supersede tunnel-interface ACLs, which allows remote attackers to bypass intended network-traffic restrictions in opportunistic circumstances by using a tunnel, aka Bug ID CSCur01042.

Cisco Small Business IP phones with SPA 500 series firmware 7.4.9 and earlier do not require authentication for Push XML requests, which allows remote attackers to make telephone calls via an XML document, aka Bug ID CSCts08768.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network.

A vulnerability in the API of Cisco Application Services Engine Software could allow an unauthenticated, remote attacker to update event policies on an affected device. The vulnerability is due to insufficient authentication of users who modify policies on an affected device. An attacker could exploit this vulnerability by crafting a malicious HTTP request to contact an affected device. A successful exploit could allow the attacker to update event policies on the affected device.

A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped.

A vulnerability in an access control mechanism of Cisco Cyber Vision Center Software could allow an unauthenticated, remote attacker to bypass authentication and access internal services that are running on an affected device. The vulnerability is due to insufficient enforcement of access control in the software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow an attacker to impact monitoring of sensors that are managed by the software.

A vulnerability in the Security Intelligence feed feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the Security Intelligence DNS feed. This vulnerability is due to incorrect feed update processing. An attacker could exploit this vulnerability by sending traffic through an affected device that should be blocked by the affected device. A successful exploit could allow the attacker to bypass device controls and successfully send traffic to devices that are expected to be protected by the affected device.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured Intrusion Prevention System (IPS) rule that inspects certain types of TCP traffic. The vulnerability is due to incorrect TCP retransmission handling. An attacker could exploit this vulnerability by sending a crafted TCP connection request through an affected device. A successful exploit could allow the attacker to bypass configured IPS rules and allow uninspected traffic onto the network.

A vulnerability in the Cisco Umbrella Secure Web Gateway service could allow an unauthenticated, remote attacker to bypass the file inspection feature. This vulnerability is due to insufficient restrictions in the file inspection feature. An attacker could exploit this vulnerability by downloading a crafted payload through specific methods. A successful exploit could allow the attacker to bypass file inspection protections and download a malicious payload.

A vulnerability in the authentication and authorization flows for VPN connections in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish a connection as a different user. This vulnerability is due to a flaw in the authorization verifications during the VPN authentication flow. An attacker could exploit this vulnerability by sending a crafted packet during a VPN authentication. The attacker must have valid credentials to establish a VPN connection. A successful exploit could allow the attacker to establish a VPN connection with access privileges from a different user.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the file policy feature that is used to inspect encrypted archive files of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured file policy to block an encrypted archive file. This vulnerability exists because of a logic error when a specific class of encrypted archive files is inspected. An attacker could exploit this vulnerability by sending a crafted, encrypted archive file through the affected device. A successful exploit could allow the attacker to send an encrypted archive file, which could contain malware and should have been blocked and dropped at the Cisco FTD device.

A vulnerability in the access control list (ACL) processing on Pseudowire interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL.

A vulnerability in the access control list (ACL) programming of Cisco IOS Software running on Cisco Industrial Ethernet 4000, 4010, and 5000 Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to the incorrect handling of IPv4 ACLs on switched virtual interfaces when an administrator enables and disables Resilient Ethernet Protocol (REP). An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.

A vulnerability in the AnyConnect firewall for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should have been denied to flow through an affected device. This vulnerability is due to a logic error in populating group ACLs when an AnyConnect client establishes a new session toward an affected device. An attacker could exploit this vulnerability by establishing an AnyConnect connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

A vulnerability in the geolocation access control feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control policy. This vulnerability is due to improper assignment of geolocation data. An attacker could exploit this vulnerability by sending traffic through an affected device. A successful exploit could allow the attacker to bypass a geolocation-based access control policy and successfully send traffic to a protected device.

A vulnerability in the Network Service Group (NSG) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. This vulnerability is due to a logic error that occurs when NSG ACLs are populated on an affected device. An attacker could exploit this vulnerability by establishing a connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies on an affected system. Devices that are configured with Snort 2 are not affected by this vulnerability. This vulnerability is due to a logic error when handling embryonic (half-open) TCP connections. An attacker could exploit this vulnerability by sending a crafted traffic pattern through an affected device. A successful exploit could allow unintended traffic to enter the network protected by the affected device.

A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface.

A vulnerability in the access control list (ACL) programming for port channel subinterfaces of Cisco Nexus 3000 and 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to send traffic that should be blocked through an affected device. This vulnerability is due to incorrect hardware programming that occurs when configuration changes are made to port channel member ports. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access network resources that should be protected by an ACL that was applied on port channel subinterfaces.

A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL). This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device.

A vulnerability in the AnyConnect firewall for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should have been denied to flow through an affected device. This vulnerability is due to a logic error in populating group ACLs when an AnyConnect client establishes a new session toward an affected device. An attacker could exploit this vulnerability by establishing an AnyConnect connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

Multiple Cisco products are affected by a vulnerability in the Snort Intrusion Prevention System (IPS) rule engine that could allow an unauthenticated, remote attacker to bypass the configured rules on an affected system. This vulnerability is due to incorrect HTTP packet handling. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured IPS rules and allow uninspected traffic onto the network.

A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL.

A vulnerability with the access control list (ACL) management within a stacked switch configuration of Cisco Business 250 Series Smart Switches and Business 350 Series Managed Switches could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. This vulnerability is due to incorrect processing of ACLs on a stacked configuration when either the primary or backup switches experience a full stack reload or power cycle. An attacker could exploit this vulnerability by sending crafted traffic through an affected device. A successful exploit could allow the attacker to bypass configured ACLs, causing traffic to be dropped or forwarded in an unexpected manner. The attacker does not have control over the conditions that result in the device being in the vulnerable state. Note: In the vulnerable state, the ACL would be correctly applied on the primary devices but could be incorrectly applied to the backup devices.

A vulnerability in Cisco Unified Threat Defense (UTD) Snort Intrusion Prevention System (IPS) Engine for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured security policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of HTTP requests when they are processed by Cisco UTD Snort IPS Engine. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process. If the action in case of Cisco UTD Snort IPS Engine failure is set to the default, fail-open, successful exploitation of this vulnerability could allow the attacker to bypass configured security policies. If the action in case of Cisco UTD Snort IPS Engine failure is set to fail-close, successful exploitation of this vulnerability could cause traffic that is configured to be inspected by Cisco UTD Snort IPS Engine to be dropped.

A vulnerability in the SMTP relay of Cisco Unity Connection could allow an unauthenticated, remote attacker to send unsolicited email messages, aka a Mail Relay Vulnerability. The vulnerability is due to improper handling of domain information in the affected software. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted requests to the targeted application. A successful exploit could allow the attacker to send email messages to arbitrary addresses. Cisco Bug IDs: CSCvg62215.

A vulnerability in the Cisco node-jose open source library before 0.11.0 could allow an unauthenticated, remote attacker to re-sign tokens using a key that is embedded within the token. The vulnerability is due to node-jose following the JSON Web Signature (JWS) standard for JSON Web Tokens (JWTs). This standard specifies that a JSON Web Key (JWK) representing a public key can be embedded within the header of a JWS. This public key is then trusted for verification. An attacker could exploit this by forging valid JWS objects by removing the original signature, adding a new public key to the header, and then signing the object using the (attacker-owned) private key associated with the public key embedded in that JWS header.

A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass configured file action policies if an Intelligent Application Bypass (IAB) with a drop percentage threshold is also configured. The vulnerability is due to incorrect counting of the percentage of dropped traffic. An attacker could exploit this vulnerability by sending network traffic to a targeted device. An exploit could allow the attacker to bypass configured file action policies, and traffic that should be dropped could be allowed into the network. Cisco Bug IDs: CSCvf86435.