Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP firmware allows remote attackers to cause a denial of service (reboot) via a long ICMP echo request (ping) packet.

Cisco AsyncOS 8.0 before 8.0.6-119 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (proxy-process hang) via a crafted HTTP POST request, aka Bug ID CSCuo12171.

The HTTP server in Cisco Unified IP Phone 7935 and 7936 running SCCP firmware allows remote attackers to cause a denial of service (reboot) via a crafted HTTP request.

The HTTPS Proxy feature in Cisco AsyncOS before 8.5.3-051 and 9.x before 9.0.0-485 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (service outage) by leveraging certain intranet connectivity and sending a malformed HTTPS request, aka Bug ID CSCuu24840.

The license-certificate upload functionality on Cisco 8800 phones with software 11.0(1) allows remote authenticated users to delete arbitrary files via an invalid file, aka Bug ID CSCuz03010.

The administrative web interface in Cisco Prime Infrastructure (PI) before 3.1.1 allows remote authenticated users to execute arbitrary commands via crafted field values, aka Bug ID CSCuy96280.

Cisco Access Point devices with software 8.2(102.43) allow remote attackers to cause a denial of service (device reload) via crafted ARP packets, aka Bug ID CSCuy55803.

MCTOOLS in the fabric interconnect in Cisco Unified Computing System (UCS) allows local users to execute arbitrary Baseboard Management Controller (BMC) commands by leveraging (1) local, (2) shell-level, or (3) debug-level privileges at the operating-system layer, aka Bug ID CSCtg76239.

The CLI parser in Cisco NX-OS allows local users to bypass intended access restrictions, and overwrite or create arbitrary files, via shell output redirection, aka Bug IDs CSCts56672 and CSCts56669.

Cisco Prime Infrastructure 1.2.0 through 2.2(2) and Cisco Evolved Programmable Network Manager (EPNM) 1.2 allow remote attackers to execute arbitrary code via crafted deserialized data in an HTTP POST request, aka Bug ID CSCuw03192.

Cisco TelePresence Video Communications Server (VCS) X8.x before X8.7.2 allows remote attackers to cause a denial of service (service disruption) via a crafted URI in a SIP header, aka Bug ID CSCuy43258.

The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS XE 2.1 through 3.17S, IOS XR 2.0.0 through 5.3.2, and NX-OS allows remote attackers to cause a denial of service (packet-processing outage) via crafted ND messages, aka Bug ID CSCuz66542, as exploited in the wild in May 2016.

The clear sshkey command in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq86559.

The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.1 and 15.2 and NX-OS 4.1 through 6.2 allows remote attackers to cause a denial of service (device reload) via a crafted header in a packet, aka Bug ID CSCuu64279.

The Mobile and Remote Access (MRA) component in Cisco TelePresence Video Communication Server (VCS) X8.1 through X8.7 and Expressway X8.1 through X8.6 mishandles certificates, which allows remote attackers to bypass authentication via an arbitrary trusted certificate, aka Bug ID CSCuz64601.

Cisco Prime Network Analysis Module (NAM) before 6.2(1-b) miscalculates IPv6 payload lengths, which allows remote attackers to cause a denial of service (mond process crash and monitoring outage) via crafted IPv6 packets, aka Bug ID CSCuy37324.

Cisco IOS XR 4.2.3, 4.3.0, 4.3.4, and 5.3.1 on ASR 9000 devices allows remote attackers to cause a denial of service (CRC and symbol errors, and interface flap) via crafted bit patterns in packets, aka Bug ID CSCuv78548.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow local users to obtain root access via crafted CLI input, aka Bug ID CSCuy21892.

Cisco RV180 and RV180W devices allow remote authenticated users to execute arbitrary commands as root via a crafted HTTP request, aka Bug ID CSCuz48592.

The web framework in Cisco Unified Computing System (UCS) Performance Manager 2.0.0 and earlier allows remote authenticated users to execute arbitrary commands via crafted parameters in a GET request, aka Bug ID CSCuy07827.

goform/WClientMACList on Cisco EPC3928 devices allows remote attackers to cause a denial of service (device crash) via a long h_sortWireless parameter, related to a "Gateway Client List Denial of Service" issue, aka Bug ID CSCux24948.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for the Cisco Email Security Appliance could allow an unauthenticated, remote attacker to cause an affected device to run out of memory and stop scanning and forwarding email messages. When system memory is depleted, it can cause the filtering process to crash, resulting in a denial of service (DoS) condition on the device. This vulnerability affects software version 9.0 through the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. Cisco Bug IDs: CSCvd29354.

A vulnerability in Session Initiation Protocol (SIP) call handling in Cisco IP Phone 8800 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the SIP process unexpectedly restarts. All active phone calls are dropped as the SIP process restarts. The vulnerability is due to incomplete input validation of the SIP packet header. An attacker could exploit this vulnerability by sending a malformed SIP packet to a targeted phone. An exploit could allow the attacker to cause a DoS condition because all phone calls are dropped when the SIP process unexpectedly restarts. Cisco Bug IDs: CSCvc62590.

A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189.

Cisco Firewall Services Module (FWSM) 3.1(6), and 3.2(2) and earlier, does not properly enforce edited ACLs, which might allow remote attackers to bypass intended restrictions on network traffic, aka CSCsj52536.

A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient bound checks performed by the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP packet to the affected system. A successful exploit could allow the attacker to cause a reload of the Web Admin Server. Cisco Bug IDs: CSCve89149.

A vulnerability in the TCL scripting subsystem of Cisco NX-OS System Software could allow an authenticated, local attacker to escape the interactive TCL shell and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient input validation of user-supplied files passed to the interactive TCL shell of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or tclsh execution privileges. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve93750, CSCve93762, CSCve93763, CSCvg04127.

An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability.

Cisco Firewall Services Module (FWSM) 3.2(1), and 3.1(5) and earlier, allows remote attackers to cause a denial of service (device reload) via a crafted HTTPS request, aka CSCsi77844.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

Cisco PIX and ASA appliances with 7.0 through 8.0 software, and Cisco Firewall Services Module (FWSM) 3.1(5) and earlier, allow remote attackers to cause a denial of service (device reload) via a crafted MGCP packet, aka CSCsi90468 (appliance) and CSCsi00694 (FWSM).

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

Cisco CallManager 5.1.1.3000-5 does not verify the Digest authentication header URI against the Request URI in SIP messages, which allows remote attackers to use sniffed Digest authentication credentials to call arbitrary telephone numbers or spoof caller ID (aka "toll fraud and authentication forward attack").

Cisco Catalyst 6500 and Cisco 7600 series devices use 127/8 IP addresses for Ethernet Out-of-Band Channel (EOBC) internal communication, which might allow remote attackers to send packets to an interface for which network exposure was unintended.

Cisco PIX and ASA appliances with 7.1 and 7.2 software, when configured for TLS sessions to the device, allow remote attackers to cause a denial of service (device reload) via a crafted TLS packet, aka CSCsg43276 and CSCsh97120.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCvf15113, CSCvf15122, CSCvf15125, CSCvf15131, CSCvf15143, CSCvg04088.

A "Cisco WebEx Network Recording Player Denial of Service Vulnerability" exists in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) and WebEx Recording Format (WRF) files. A remote attacker could exploit this by providing a user with a malicious ARF or WRF file via email or URL and convincing the user to launch the file. Exploitation of this could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. Cisco Bug IDs: CSCve11545, CSCve02843, CSCve11548.

The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.

A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.

A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

A vulnerability in the Network Access Manager (NAM) of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to enable multiple network adapters, aka a Dual-Homed Interface vulnerability. The vulnerability is due to insufficient NAM policy enforcement. An attacker could exploit this vulnerability by manipulating network interfaces of the device to allow multiple active network interfaces. A successful exploit could allow the attacker to send traffic over a non-authorized network interface. Cisco Bug IDs: CSCvf66539.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621.

A vulnerability in the Local Packet Transport Services (LPTS) ingress frame-processing functionality of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause one of the LPTS processes on an affected system to restart unexpectedly, resulting in a brief denial of service (DoS) condition. The vulnerability is due to incomplete LPTS frame validation by the affected software. An attacker could exploit this vulnerability by sending crafted XML requests to the management interface of an affected system. A successful exploit could allow the attacker to cause one of the LPTS processes on the affected system to restart unexpectedly, which would impact LPTS traffic and cause a brief DoS condition while the process restarts. Cisco Bug IDs: CSCvf76332.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062.

A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365.

A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785.

A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to read the contents of arbitrary files. The vulnerability is due to insufficient input validation for a specific CLI command. An attacker could exploit this vulnerability by issuing a crafted command on the CLI. An exploit could allow the attacker unauthorized access to read arbitrary files on the underlying local file system. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to read files from any VDC. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51707, CSCve93961, CSCve93964, CSCve93965, CSCve93968, CSCve93974, CSCve93976.