emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=import-category to admin/_cmdstat.jsp via the uploadFile attribute.
emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=packet-capture to admin/_cmdstat.jsp via the mac attribute.
emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=get-platform-depends to admin/_cmdstat.jsp via the uploadFile attribute.
An issue was discovered in CommScope Ruckus Unleashed prior to 200.15.6.212.27 and 200.18.7.1.323, and in Ruckus ZoneDirector prior to 10.5.1.0.282, where a path-traversal flaw in the web interface lets the server execute attacker-supplied EJS templates outside permitted directories, allowing a remote unauthenticated attacker who can upload a template (e.g., via FTP) to escalate privileges and run arbitrary template code on the controller.
An issue was discovered in CommScope Ruckus Unleashed prior to 200.15.6.212.14 and 200.17.7.0.139, where the functions `stamgr_cfg_adpt_addStaFavourite` and `stamgr_cfg_adpt_addStaIot` pass a client hostname directly to snprintf as the format string. A remote attacker can exploit this flaw either by sending a crafted request to the authenticated endpoint `/admin/_conf.jsp`, or without authentication and without direct network access to the controller by spoofing the MAC address of a favourite station and embedding malicious format specifiers in the DHCP hostname field, resulting in unauthenticated format-string processing and arbitrary code execution on the controller.
rkscli in Ruckus Wireless Unleashed through 200.7.10.92 allows a remote attacker to achieve command injection and jailbreak the CLI via a crafted CLI command. This affects C110, E510, H320, H510, M510, R320, R310, R500, R510 R600, R610, R710, R720, R750, T300, T301n, T301s, T310c, T310d, T310n, T310s, T610, T710, and T710s devices.
Ruckus Wireless Admin through 10.4 allows Remote Code Execution via an unauthenticated HTTP GET Request, as demonstrated by a /forms/doLogin?login_username=admin&password=password$(curl substring.
In Ruckus R310 10.5.1.0.199, Ruckus R500 10.5.1.0.199, Ruckus R600 10.5.1.0.199, Ruckus T300 10.5.1.0.199, Ruckus T301n 10.5.1.0.199, Ruckus T301s 10.5.1.0.199, SmartCell Gateway 200 (SCG200) before 3.6.2.0.795, SmartZone 100 (SZ-100) before 3.6.2.0.795, SmartZone 300 (SZ300) before 3.6.2.0.795, Virtual SmartZone (vSZ) before 3.6.2.0.795, ZoneDirector 1100 9.10.2.0.130, ZoneDirector 1200 10.2.1.0.218, ZoneDirector 3000 10.2.1.0.218, ZoneDirector 5000 10.0.1.0.151, a vulnerability allows attackers to switch completely to unauthorized image to be Boot as primary verified image.
In Ruckus R310 10.5.1.0.199, Ruckus R500 10.5.1.0.199, Ruckus R600 10.5.1.0.199, Ruckus T300 10.5.1.0.199, Ruckus T301n 10.5.1.0.199, Ruckus T301s 10.5.1.0.199, SmartCell Gateway 200 (SCG200) before 3.6.2.0.795, SmartZone 100 (SZ-100) before 3.6.2.0.795, SmartZone 300 (SZ300) before 3.6.2.0.795, Virtual SmartZone (vSZ) before 3.6.2.0.795, ZoneDirector 1100 9.10.2.0.130, ZoneDirector 1200 10.2.1.0.218, ZoneDirector 3000 10.2.1.0.218, ZoneDirector 5000 10.0.1.0.151, a vulnerability allows attackers to bypass firmware image bad md5 checksum failed error.
A stack buffer overflow in webs in Ruckus Wireless Unleashed through 200.7.10.102.92 allows a remote attacker to execute code via an unauthenticated crafted HTTP request. This affects C110, E510, H320, H510, M510, R320, R310, R500, R510 R600, R610, R710, R720, R750, T300, T301n, T301s, T310c, T310d, T310n, T310s, T610, T710, and T710s devices.
emfd/libemf in Ruckus Wireless Unleashed through 200.7.10.102.92 allows a remote attacker to achieve command injection via a crafted HTTP request. This affects C110, E510, H320, H510, M510, R320, R310, R500, R510 R600, R610, R710, R720, R750, T300, T301n, T301s, T310c, T310d, T310n, T310s, T610, T710, and T710s devices.
AjaxRestrictedCmdStat in zap in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote code execution via a POST request that uses tools/_rcmdstat.jsp to write to a specified filename.
Incorrect access control in the web interface in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote credential fetch via an unauthenticated HTTP request involving a symlink with /tmp and web/user/wps_tool_cache.
A stack-based buffer overflow in zap_parse_args in zap.c in zap in Ruckus Unleashed through 200.7.10.102.64 allows remote code execution via an unauthenticated HTTP request.
In Ruckus R310 10.5.1.0.199, Ruckus R500 10.5.1.0.199, Ruckus R600 10.5.1.0.199, Ruckus T300 10.5.1.0.199, Ruckus T301n 10.5.1.0.199, Ruckus T301s 10.5.1.0.199, SmartCell Gateway 200 (SCG200) before 3.6.2.0.795, SmartZone 100 (SZ-100) before 3.6.2.0.795, SmartZone 300 (SZ300) before 3.6.2.0.795, Virtual SmartZone (vSZ) before 3.6.2.0.795, ZoneDirector 1100 9.10.2.0.130, ZoneDirector 1200 10.2.1.0.218, ZoneDirector 3000 10.2.1.0.218, ZoneDirector 5000 10.0.1.0.151, a vulnerability allows attackers to exploit the official image signature to force injection unauthorized image signature.
An issue was discovered in CommScope Ruckus Unleashed prior to 200.15.6.212.14 and 200.17.7.0.139, and in Ruckus ZoneDirector prior to 10.5.1.0.279, where a hidden debug script `.ap_debug.sh` invoked from the restricted CLI does not properly sanitize its input, allowing an authenticated attacker to execute arbitrary commands as root on the controller or specified target.
Ruckus Networks Solo APs firmware releases R110.x or before and Ruckus Networks SZ managed APs firmware releases R5.x or before contain authenticated Root Command Injection in the web-GUI that could allow authenticated valid users to execute privileged commands on the respective systems.
Ruckus Wireless Zone Director Controller firmware releases ZD9.x, ZD10.0.0.x, ZD10.0.1.x (less than 10.0.1.0.17 MR1 release) and Ruckus Wireless Unleashed AP Firmware releases 200.0.x, 200.1.x, 200.2.x, 200.3.x, 200.4.x. contain OS Command Injection vulnerabilities that could allow local authenticated users to execute arbitrary privileged commands on the underlying operating system by appending those commands in the Common Name field in the Certificate Generation Request.
Ruckus Networks Unleashed AP firmware releases before 200.6.10.1.x and Ruckus Networks Zone Director firmware releases 10.1.0.0.x, 9.10.2.0.x, 9.12.3.0.x, 9.13.3.0.x, 10.0.1.0.x or before contain authenticated Root Command Injection in the CLI that could allow authenticated valid users to execute privileged commands on the respective systems.
A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
lpd daemon (in.lpd) in Solaris 8 and earlier allows remote attackers to execute arbitrary commands via a job request with a crafted control file that is not properly handled when lpd invokes a mail program. NOTE: this might be the same vulnerability as CVE-2000-1220.
An OS command injection vulnerability exists in the NAT parameter of GoCast 1.1.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.
Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable.
Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.
A flaw was found in WebSVN 2.3.2. Without prior authentication, if the 'allowDownload' option is enabled in config.php, an attacker can invoke the dl.php script and pass a well formed 'path' argument to execute arbitrary commands against the underlying operating system.
OS command injection vulnerability exists in ffBull ver.4.11, which may allow a remote unauthenticated attacker to execute an arbitrary OS command with the privilege of the running web server. Note that the developer was unreachable, therefore, users should consider stop using ffBull ver.4.11.
The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.
The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.
phf CGI program allows remote command execution through shell metacharacters.
Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.
A remote code execution issue was discovered in Zoho ManageEngine Applications Manager before 13.6 (build 13640). The publicly accessible testCredential.do endpoint takes multiple user inputs and validates supplied credentials by accessing a specified system. This endpoint calls several internal classes, and then executes a PowerShell script. If the specified system is OfficeSharePointServer, then the username and password parameters to this script are not validated, leading to Command Injection.
The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).
The web interface in chumby one before 1.0.4 and chumby classic before 1.7.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a request.
GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary commands via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271, CVE-2014-7169, and CVE-2014-6277.
Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.
An issue was discovered in ClipBucket before 4.0.0 Release 4902. Any OS commands can be injected via shell metacharacters in the file_name parameter to /api/file_uploader.php or /actions/file_downloader.php.
MVPower CCTV DVR models, including TV-7104HE 1.8.4 115215B9 and TV7108HE, contain a web shell that is accessible via a /shell URI. A remote unauthenticated attacker can execute arbitrary operating system commands as root. This vulnerability has also been referred to as the "JAWS webserver RCE" because of the easily identifying HTTP response server field. Other firmware versions, at least from 2014 through 2019, can be affected. This was exploited in the wild in 2017 through 2022.
IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.
A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.
The CGI scripts in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 do not properly validate an unspecified parameter, which allows remote attackers to execute arbitrary commands by using a command string for this parameter's value, related to a "command injection vulnerability."
OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.
A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
In multiple products of WAGO a vulnerability allows an unauthenticated, remote attacker to create new users and change the device configuration which can result in unintended behaviour, Denial of Service and full system compromise.
Xerox WorkCentre 3655, 3655i, 58XX, 58XXi, 59XX, 59XXi, 6655, 6655i, 72XX, 72XXi, 78XX, 78XXi, 7970, and 7970i devices before 073.xxx.086.15410 do not properly escape parameters in the support/remoteUI/configrui.php script, which can allow an unauthenticated attacker to execute OS commands on the device.
The application login page in AKIPS Network Monitor 15.37 through 16.5 allows a remote unauthenticated attacker to execute arbitrary OS commands via shell metacharacters in the username parameter (a failed login attempt returns the command-injection output to a limited login failure field). This is fixed in 16.6.
The FXCLI_OraBR_Exec_Command function in FastBackServer.exe in the Server in IBM Tivoli Storage Manager (TSM) FastBack 5.5.0.0 through 5.5.6.0 and 6.1.0.0 through 6.1.0.1 uses values of packet fields to determine the content and length of data copied to memory, which allows remote attackers to execute arbitrary code via a crafted packet. NOTE: this might overlap CVE-2010-3059.
Format string vulnerability in the _Eventlog function in FastBackServer.exe in the Server in IBM Tivoli Storage Manager (TSM) FastBack 5.5.0.0 through 5.5.6.0 and 6.1.0.0 through 6.1.0.1 allows remote attackers to execute arbitrary code via format string specifiers located after a | (pipe) character in a string. NOTE: this might overlap CVE-2010-3059.
react-dev-utils on Windows allows developers to run a local webserver for accepting various commands, including a command to launch an editor. The input to that command was not properly sanitized, allowing an attacker who can make a network request to the server (either via CSRF or by direct request) to execute arbitrary commands on the targeted system. This issue affects multiple branches: 1.x.x prior to 1.0.4, 2.x.x prior to 2.0.2, 3.x.x prior to 3.1.2, 4.x.x prior to 4.2.2, and 5.x.x prior to 5.0.2.
The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.
The Crestron Console service running on DGE-100, DM-DGE-200-C, and TS-1542-C devices with default configuration and running firmware versions 1.3384.00049.001 and lower are vulnerable to command injection that can be used to gain root-level access.