Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A command injection vulnerability has been reported to affect License Center. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: License Center 1.9.43 and later
CyberPanel (aka Cyber Panel) before 2.3.5 allows Command Injection via completePath in the ProcessUtilities.outputExecutioner() sink. There is /filemanager/upload (aka File Manager upload) unauthenticated remote code execution via shell metacharacters.
Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
Azure CLI is the command-line interface for Microsoft Azure. In versions previous to 2.40.0, Azure CLI contains a vulnerability for potential code injection. Critical scenarios are where a hosting machine runs an Azure CLI command where parameter values have been provided by an external source. The vulnerability is only applicable when the Azure CLI command is run on a Windows machine and with any version of PowerShell and when the parameter value contains the `&` or `|` symbols. If any of these prerequisites are not met, this vulnerability is not applicable. Users should upgrade to version 2.40.0 or greater to receive a a mitigation for the vulnerability.
Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Pig Provider, Apache Airflow allows an attacker to control commands executed in the task execution context, without write access to DAG files. This issue affects Pig Provider versions prior to 4.0.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case Pig Provider is installed (Pig Provider 4.0.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the Pig Provider version 4.0.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version.
An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.
A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.5.032 and later
An OS command injection vulnerability has been reported to affect HBS 3 Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 25.1.1.673 and later
A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "capture_packages" operation.
A vulnerability classified as critical was found in Ruijie RG-UAC up to 20240506. Affected by this vulnerability is an unknown functionality of the file /view/networkConfig/RouteConfig/StaticRoute/static_route_edit_commit.php. The manipulation of the argument oldipmask/oldgateway leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263935. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
In TOTOLINK T6 V4.1.5cu.709_B20210518, there is an execute arbitrary command in cstecgi.cgi.
In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.
TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to command injection via cstecgi.cgi
Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Pinot Provider, Apache Airflow allows an attacker to control commands executed in the task execution context, without write access to DAG files. This issue affects Apache Airflow Pinot Provider versions prior to 4.0.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case Apache Airflow Pinot Provider is installed (Apache Airflow Pinot Provider 4.0.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the Pinot Provider version 4.0.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version.
GNOME OCRFeeder before 0.8.4 allows OS command injection via shell metacharacters in a PDF or image filename.
Tenda AC1206 V15.03.06.23 was discovered to contain a command injection vulnerability via the mac parameter in the function formWriteFacMac.
Logicytics is designed to harvest and collect data for forensic analysis. Logicytics has a basic vuln affecting compromised devices from shell injections. This vulnerability is fixed in 2.3.2.
The Gateway Provisioning service in EMC Secure Remote Services Virtual Edition (ESRS VE) 3.02 and 3.03 allows remote attackers to execute arbitrary OS commands via unspecified vectors.
Certain models of D-Link wireless routers do not properly validate user input in the telnet service, allowing unauthenticated remote attackers to use hard-coded credentials to log into telnet and inject arbitrary OS commands, which can then be executed on the device.
In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, when using Apache and PHP-CGI on Windows, if the system is set up to use certain code pages, Windows may use "Best-Fit" behavior to replace characters in command line given to Win32 API functions. PHP CGI module may misinterpret those characters as PHP options, which may allow a malicious user to pass options to PHP binary being run, and thus reveal the source code of scripts, run arbitrary PHP code on the server, etc.
Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.
There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.
TOTOLink A700RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the lang parameter in the function cstesystem. This vulnerability allows attackers to execute arbitrary commands via a crafted payload.
D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.
Elsight – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
The web configuration interface of the TP-Link M7350 V3 with firmware version 190531 is affected by a pre-authentication command injection vulnerability.
TOTOLINK A7100RU V7.4cu.2313_B20191024 has a Command Injection vulnerability. An attacker can obtain a stable root shell through a specially constructed payload.
In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold. The Apm.UI.Areas.APM.Controllers.CommunityController allows execution of commands with iisapppool\nmconsole privileges.
Tenda AC9 V15.03.2.21_cn is vulnerable to command injection via goform/SetSysTimeCfg.
RPi-Jukebox-RFID v2.3.0 was discovered to contain a command injection vulnerability via the component /htdocs/utils/Files.php. This vulnerability is exploited via a crafted payload injected into the file name of an uploaded file.
WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the pro_stor_canceltrans_handler_part_19 function.
In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.
In D-Link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img a command injection vulnerability occurs in /goform/Diagnosis, after the condition is met, setnum will be spliced into v10 by snprintf, and the system will be executed, resulting in a command injection vulnerability
WAVLINK WL-WN575A3 RPT75A3.V4300.201217 was discovered to contain a command injection vulnerability when operating the file adm.cgi. This vulnerability allows attackers to execute arbitrary commands via the username parameter.
A vulnerability, which was classified as critical, was found in Ruijie RG-UAC up to 20240506. This affects an unknown part of the file /view/networkConfig/GRE/gre_add_commit.php. The manipulation of the argument name/remote/local/IP leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263937 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
D-Link GO-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 is vulnerable to Command Injection via /cgibin, hnap_main,
Rengine v1.3.0 was discovered to contain a command injection vulnerability via the scan engine function.
A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240506. Affected is an unknown function of the file /view/networkConfig/physicalInterface/interface_commit.php. The manipulation of the argument name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. VDB-263934 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Tiki Wiki CMS – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.
A command injection vulnerability exists in /goform/exeCommand in Tenda W6 V1.0.0.9(4122), which allows attackers to construct cmdinput parameters for arbitrary command execution.
The GitOps Tools Extension for VSCode can make it easier to manage Flux objects. A specially crafted Flux object may allow for remote code execution in the machine running the extension, in the context of the user that is running VSCode. Users using the VSCode extension to manage clusters that are shared amongst other users are affected by this issue. The only safe mitigation is to update to the latest version of the extension.
HP no Mawashimono Nikki 6.6 and earlier allows remote attackers to execute arbitrary commands via unspecified vectors, related to a "command injection vulnerability."
admin.php?page=projects in Lexiglot through 2014-11-20 allows command injection via username and password fields.