Buffer Overflow vulnerability found in Netgear R6900 v.1.0.2.26, R6700v3 v.1.0.4.128, R6700 v.1.0.0.26 allows a remote attacker to execute arbitrary code and cause a denial ofservice via the getInputData parameter of the fwSchedule.cgi page.

NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a format string vulnerability in a SOAP service that could allow an attacker to execute arbitrary code on the device.

NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a buffer overflow vulnerability in various CGI mechanisms that could allow an attacker to execute arbitrary code on the device.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

Netgear R6850 1.1.0.88 was discovered to contain a command injection vulnerability via the c4-IPAddr parameter.

NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX40 before 1.0.2.60, RAX35 before 1.0.2.60, R6400v2 before 1.0.4.122, R6700v3 before 1.0.4.122, R6900P before 1.3.3.152, R7000P before 1.3.3.152, R7000 before 1.0.11.136, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR R6400, R6700, R7000, R7850, R7900, R8000, RS400, and XR300 routers with firmware 1.0.4.84_10.0.58. Authentication is not required to exploit this vulnerability. The specific flaw exists within the check_ra service. A crafted raePolicyVersion in a RAE_Policy.json file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9852.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_sec.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via wan_dns1_pri.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_push1.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameters: starthour, startminute , endhour, and endminute.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_pri.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameters apmode_dns1_pri and apmode_dns1_sec.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter enable_band_steering.

Netgear Nighthawk AC1900 Smart WiFi Dual Band Gigabit Router R7000-V1.0.11.134_10.2.119 is vulnerable to Buffer Overflow via the wl binary in firmware. There is a stack overflow vulnerability caused by strncat

Certain NETGEAR devices are affected by server-side injection. This affects D7800 before 1.0.1.58, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6100v2 before 1.0.1.86, EX6200v2 before 1.0.1.78, EX6250 before 1.0.0.110, EX6410 before 1.0.0.110, EX6420 before 1.0.0.110, EX6400v2 before 1.0.0.110, EX7300 before 1.0.2.144, EX6400 before 1.0.2.144, EX7320 before 1.0.0.110, EX7300v2 before 1.0.0.110, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.90, RBK40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, RBS50Y before 2.6.1.40, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.72, XR500 before 2.3.2.56, and XR700 before 1.0.1.20.

Certain NETGEAR devices are affected by authentication bypass. This affects AC2400 before 1.1.0.84, AC2600 before 1.1.0.84, D7000 before 1.0.1.82, R6020 before 1.0.0.52, R6080 before 1.0.0.52, R6120 before 1.0.0.80, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.1.0.84, R6800 before 1.1.0.84, R6850 before 1.1.0.84, R6900v2 before 1.1.0.84, R7200 before 1.1.0.84, R7350 before 1.1.0.84, R7400 before 1.1.0.84, and R7450 before 1.1.0.84.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 3.2.18.2, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX3700 before 1.0.0.94, EX3800 before 1.0.0.94, EX6120 before 1.0.0.64, EX6130 before 1.0.0.44, EX7000 before 1.0.1.104, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.106, R6700v3 before 1.0.4.106, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7100LG before 1.0.0.72, R7850 before 1.0.5.74, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, R8300 before 1.0.2.154, R8500 before 1.0.2.154, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBW30 before 2.6.2.2, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS40V before 2.6.2.8.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7000v2 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX43 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX35v2 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and XR1000 before 1.0.0.58.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects RBS50Y before 2.7.0.122, SRK60 before 2.7.0.122, SRR60 before 2.7.0.122, SRS60 before 2.7.0.122, SXK30 before 3.2.33.108, SXR30 before 3.2.33.108, SXS30 before 3.2.33.108, and SRC60 before 2.7.0.122.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.74, D8500 before 1.0.3.60, DC112A before 1.0.0.56, R6300v2 before 1.0.4.50, R6400 before 1.0.1.68, R7000 before 1.0.11.116, R7100LG before 1.0.0.70, RBS40V before 2.6.2.8, RBW30 before 2.6.2.2, RS400 before 1.5.1.80, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.54, EX7000 before 1.0.1.94, EX7500 before 1.0.0.72, R6250 before 1.0.4.48, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.102, R6700v3 before 1.0.4.102, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7850 before 1.0.5.68, R7900 before 1.0.4.30, R7960P before 1.4.1.68, R8000 before 1.0.4.52, RAX200 before 1.0.2.88, RBS40V before 2.6.2.4, RS400 before 1.5.1.80, XR300 before 1.0.3.56, R7000P before 1.3.2.124, R8000P before 1.4.1.68, R8500 before 1.0.2.144, RAX80 before 1.0.3.102, R6900P before 1.3.2.124, R7900P before 1.4.1.68, R8300 before 1.0.2.144, RAX75 before 1.0.3.102, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, and RBK852 before 3.2.17.12.

NETGEAR D7000 devices before 1.0.1.82 are affected by authentication bypass.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects XR300 before 1.0.3.68, R7000P before 1.3.3.140, and R6900P before 1.3.3.140.

NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects AC2100 before 1.2.0.88, AC2400 before 1.2.0.88, AC2600 before 1.2.0.88, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.2.0.88, R6800 before 1.2.0.88, R6850 before 1.1.0.84, R6900v2 before 1.2.0.88, R7200 before 1.2.0.88, R7350 before 1.2.0.88, R7400 before 1.2.0.88, and R7450 before 1.2.0.88.

NETGEAR R6700v2 devices before 1.2.0.88 are affected by authentication bypass.

NETGEAR RAX200 devices before 1.0.5.132 are affected by insecure code.

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.

Certain NETGEAR smart switches are affected by a remote admin password change by an unauthenticated attacker via the (disabled by default) /sqfs/bin/sccd daemon, which fails to check authentication when the authentication TLV is missing from a received NSDP packet. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS750E before 1.0.1.10, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by lack of access control at the function level. This affects D6220 before 1.0.0.48, D6400 before 1.0.0.82, D7000v2 before 1.0.0.52, D7800 before 1.0.1.44, D8500 before 1.0.3.43, DC112A before 1.0.0.40, DGN2200v4 before 1.0.0.108, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, R6020 before 1.0.0.34, R6080 before 1.0.0.34, R6120 before 1.0.0.44, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.40, R6850 before 1.1.0.40, R6350 before 1.1.0.40, R6400v2 before 1.0.2.62, R6700v3 before 1.0.2.62, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7000 before 1.0.9.34, R6900P before 1.3.1.44, R7000P before 1.3.1.44, R7100LG before 1.0.0.48, R7200 before 1.2.0.48, R7350 before 1.2.0.48, R7400 before 1.2.0.48, R7450 before 1.2.0.36, AC2100 before 1.2.0.36, AC2400 before 1.2.0.36, AC2600 before 1.2.0.36, R7500v2 before 1.0.3.38, R7800 before 1.0.2.58, R7900 before 1.0.3.8, R7960P before 1.4.1.44, R8000 before 1.0.4.28, R7900P before 1.4.1.30, R8000P before 1.4.1.30, R8900 before 1.0.4.2, R9000 before 1.0.4.2, RAX120 before 1.0.0.74, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, WNR3500Lv2 before 1.2.0.56, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

Netgear RP114 allows remote attackers to bypass the keyword based URL filtering by requesting a long URL, as demonstrated using a large number of %20 (hex-encoded space) sequences.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code.

A Command Injection vulnerability exists in NETGEAR WNR2000v4 version 1.0.0.70. When using HTTP for SOAP authentication, command execution occurs during the process after successful authentication.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MFileUploadController class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12124.

Netgear RP114 Cable/DSL Web Safe Router Firmware 3.26 uses a default administrator password and accepts admin logins on the external interface, which allows remote attackers to gain privileges if the password is not changed.