Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to bypass the presentation code sending a crafted HTTP POST request to login.cgi. A remote, unauthenticated attacker can use this vulnerability to download the current slide image without knowing the access code.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to bypass the presentation code simply by requesting /images/browserslide.jpg via HTTP. A remote, unauthenticated attacker can use this vulnerability to watch a slideshow without knowing the access code.

Directory traversal vulnerability in cgi-bin/login.cgi on Crestron AirMedia AM-100 devices with firmware before 1.4.0.13 allows remote attackers to read arbitrary files via a .. (dot dot) in the src parameter.

Crestron Electronics DM-TXRX-100-STR devices with firmware before 1.3039.00040 rely on the client to perform authentication, which allows remote attackers to obtain access by setting the value of objresp.authenabled to 1.

Crestron Electronics DM-TXRX-100-STR devices with firmware before 1.3039.00040 use a hardcoded 0xb9eed4d955a59eb3 X.509 certificate from an OpenSSL Test Certification Authority, which makes it easier for remote attackers to conduct man-in-the-middle attacks against HTTPS sessions by leveraging the certificate's trust relationship.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to act as a moderator to a slide show via crafted HTTP POST requests to conference.cgi. A remote, unauthenticated attacker can use this vulnerability to start, stop, and disconnect active slideshows.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 anyone can change the administrator and moderator passwords via the iso.3.6.1.4.1.3212.100.3.2.8.1 and iso.3.6.1.4.1.3212.100.3.2.8.2 OIDs. A remote, unauthenticated attacker can use this vulnerability to change the admin or moderator user's password and gain access to restricted areas on the HTTP interface.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 is vulnerable to denial of service via a crafted request to TCP port 389. The request will force the slideshow to transition into a "stopped" state. A remote, unauthenticated attacker can use this vulnerability to stop an active slideshow.

TrustTunnel is an open-source VPN protocol with a rule bypass issue in versions prior to 0.9.115. In `tls_listener.rs`, `TlsListener::listen()` peeks 1024 bytes and calls `extract_client_random(...)`. If `parse_tls_plaintext` fails (for example, a fragmented/partial ClientHello split across TCP writes), `extract_client_random` returns `None`. In `rules.rs`, `RulesEngine::evaluate` only evaluates `client_random_prefix` when `client_random` is `Some(...)`. As a result, when extraction fails (`client_random == None`), any rule that relies on `client_random_prefix` matching is skipped and evaluation falls through to later rules. As an important semantics note: `client_random_prefix` is a match condition only. It does not mean "block non-matching prefixes" by itself. A rule with `client_random_prefix = ...` triggers its `action` only when the prefix matches (and the field is available to evaluate). Non-matches (or `None`) simply do not match that rule and continue to fall through. The vulnerability is fixed in version 0.9.115.

A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions), CP-8021 MASTER MODULE (All versions), CP-8022 MASTER MODULE WITH GPRS (All versions). The component allows to activate a web server module which provides unauthenticated access to its web pages. This could allow an attacker to retrieve debug-level information from the component such as internal network topology or connected systems.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.9, 26.0.4, and 27.0.1, unauthenticated users could send a DAV request which reveals whether a calendar or an address book with the given identifier exists for the victim. Nextcloud Server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available.

Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, Serve static Middleware for the Cloudflare Workers adapter contains an information disclosure vulnerability that may allow attackers to read arbitrary keys from the Workers environment. Improper validation of user-controlled paths can result in unintended access to internal asset keys. Version 4.11.7 contains a patch for the issue.

Horilla is a free and open source Human Resource Management System (HRMS). Versions 1.4.0 and above expose unpublished job postings through the /recruitment/recruitment-details// endpoint without authentication. The response includes draft job titles, descriptions and application link allowing unauthenticated users to view unpublished roles and access the application workflow for unpublished jobs. Unauthorized access to unpublished job posts can leak sensitive internal hiring information and cause confusion among candidates. This issue has been fixed in version 1.5.0.

A weakness has been identified in Tenda AC21 16.03.08.16. This impacts an unknown function of the file /cgi-bin/DownloadLog of the component Web Management Interface. Executing a manipulation can lead to information disclosure. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

SourceCodester Best House Rental Management System v1.0 is vulnerable to Incorrect Access Control via /rental/payment_report.php, /rental/balance_report.php, /rental/invoices.php, /rental/tenants.php, and /rental/users.php.

An Incorrect Access Control vulnerability was found in /smsa/view_teachers.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view TEACHER details.

An Incorrect Access Control vulnerability was found in /smsa/view_class.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view CLASS details.

An Incorrect Access Control vulnerability was found in /smsa/view_subject.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view SUBJECT details.

An Incorrect Access Control vulnerability was found in /smsa/view_marks.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view MARKS details.

An Incorrect Access Control vulnerability was found in /smsa/view_students.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view STUDENT details.

An Incorrect Access Control vulnerability was found in /smsa/admin_student_register_approval.php and /smsa/admin_student_register_approval_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view and approve student registration.

Any URLs with download_attachment.php under templates or home folders can allow arbitrary files downloaded without login in BroadLearning eClass before version ip.2.5.10.2.1.

The leakage of the client secret in Kaibutsunosato v13.6.1 allows attackers to obtain the channel access token and send crafted broadcast messages.

Mattermost Desktop App versions <=5.8.0 fail to safeguard screen capture functionality which allows an attacker to silently capture high-quality screenshots via JavaScript APIs.

A vulnerability has been identified in Automation License Manager 5 (All versions < 5.3.4.4). An attacker with network access to the device could send specially crafted network packets to determine whether or not a network port on another remote system is accessible or not. This allows the attacker to do basic network scanning using the victims machine. Successful exploitation requires a network connection to the affected device. The attacker does not need privileges, no user interaction is required. The impact is limited to determining whether or not a port on a target system is accessible by the affected device.

A weakness has been identified in WeKan up to 8.20. This issue affects some unknown processing of the file server/publications/activities.js of the component Activity Publication Handler. Executing a manipulation can lead to information disclosure. It is possible to launch the attack remotely. Upgrading to version 8.21 is capable of addressing this issue. This patch is called 91a936e07d2976d4246dfe834281c3aaa87f9503. You should upgrade the affected component.

Incorrect access control in the REST API endpoint of HubSpot v1.29441 allows unauthenticated attackers to view users' data without proper authorization.

An issue was discovered on Moxa AWK-3121 1.14 devices. It is intended that an administrator can download /systemlog.log (the system log). However, the same functionality allows an attacker to download the file without any authentication or authorization.

An information disclosure vulnerability was reported in Lenovo XClarity Administrator (LXCA) versions prior to 2.6.6 that could allow unauthenticated access to some configuration files which may contain usernames, license keys, IP addresses, and encrypted password hashes.

Adobe ColdFusion versions 2018u18 (and earlier), 2021u8 (and earlier) and 2023u2 (and earlier) are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to access the administration CFM and CFC endpoints resulting in a low-confidentiality impact. Exploitation of this issue does not require user interaction.

Advantech WebAccess 8.3.4 does not properly restrict an RPC call that allows unauthenticated, remote users to read files. An attacker can use this vulnerability to recover the administrator password.

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. It performs actions based on certain SMS commands. This can be used to set up a voice communication channel from the watch to any telephone number, initiated by sending a specific SMS and using the default password, e.g., pw,<password>,call,<mobile_number> triggers an outbound call from the watch. The password is sometimes available because of CVE-2019-20471.

Incorrect Access Control in ITB-GmbH TradePro v9.5, allows remote attackers to receive all orders from the online shop via oordershow component in customer function.

Incorrect Access Control in ITB-GmbH TradePro v9.5, allows remote attackers to receive all order confirmations from the online shop via the printmail plugin.

A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited.

A vulnerability in the Graphite service of Cisco HyperFlex software could allow an unauthenticated, remote attacker to retrieve data from the Graphite service. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by sending crafted requests to the Graphite service. A successful exploit could allow the attacker to retrieve any statistics from the Graphite service. Versions prior to 3.5(2a) are affected.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. The webserver of an affected device is missing specific security headers. This could allow an remote attacker to extract confidential session information under certain circumstances.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. The vulnerability is due to improper access controls for certain URLs on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download log files and diagnostic information from the affected device.

An access control issue exists in < 12.3.5, < 12.2.8, and < 12.1.14 for GitLab Community Edition (CE) and Enterprise Edition (EE) where private merge requests and issues would be disclosed with the Group Search feature provided by Elasticsearch integration

A security vulnerability has been detected in Tenda AC21 16.03.08.16. Affected is an unknown function of the file /cgi-bin/DownloadFlash of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

Improper Access Control in GitHub repository plantuml/plantuml prior to 1.2023.9.

A vulnerability in the application policy configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data on an affected device. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument. This flaw arises from an inadequate permission model that fails to restrict file watching through the fs.watchFile API. As a result, malicious actors can monitor files that they do not have explicit read access to. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.

An issue was discovered in the GrowthExperiments extension for MediaWiki through 1.39.3. Attackers might be able to see edits for which the username has been hidden, because there is no check for rev_deleted.

If exploited, this absolute path traversal vulnerability could allow attackers to traverse files in File Station. QNAP has already fixed these issues in QES 2.1.1 Build 20201006 and later.

An issue was discovered in Eaton xComfort Ethernet Communication Interface (ECI) Versions 1.07 and prior. By accessing a specific uniform resource locator (URL) on the webserver, a malicious user may be able to access files without authenticating.

Apache Atlas versions 0.6.0 (incubating), 0.7.0 (incubating), and 0.7.1 (incubating) allow access to the webapp directory contents by pointing to URIs like /js and /img.