In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses.

In Mbed TLS before 3.1.0, psa_aead_generate_nonce allows policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application.

mySCADA myPRO Versions 8.20.0 and prior stores passwords using MD5, which may allow an attacker to crack the previously retrieved password hashes.

A Broken or Risky Cryptographic Algorithm exists in Max Mazurov Maddy before 0.5.2, which is an unnecessary risk that may result in the exposure of sensitive information.

Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

The use of a broken or risky cryptographic algorithm in Philips Vue PACS versions 12.2.x.x and prior is an unnecessary risk that may result in the exposure of sensitive information.

In JetBrains TeamCity before 2021.1, an insecure key generation mechanism for encrypted properties was used.

The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue.

The Visionsoft Audit on Demand Service (VSAOD) in Visionsoft Audit 12.4.0.0 uses weak cryptography (XOR) when (1) transmitting passwords, which allows remote attackers to obtain sensitive information by sniffing the network; and (2) storing passwords in the configuration file, which allows local users to obtain sensitive information by reading this file.

An Information Exposure vulnerability in Juniper Networks SRC Series devices configured for NETCONF over SSH permits the negotiation of weak ciphers, which could allow a remote attacker to obtain sensitive information. A remote attacker with read and write access to network data could exploit this vulnerability to display plaintext bits from a block of ciphertext and obtain sensitive information. This issue affects all Juniper Networks SRC Series versions prior to 4.13.0-R6.

IBM Security SOAR uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM QRadar SIEM 7.3 and 7.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 201778.

HCL OneTest Performance V9.5, V10.0, V10.1 uses basic authentication which is relatively weak. An attacker could potentially decode the encoded credentials.

Python-RSA before 4.1 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

IBM Sterling Secure Proxy 6.0.1, 6.0.2, 2.4.3.2, and 3.4.3.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-ForceID: 201100.

Apache WSS4J before 1.6.17 and 2.0.x before 2.0.2 improperly leaks information about decryption failures when decrypting an encrypted key or message data, which makes it easier for remote attackers to recover the plaintext form of a symmetric key via a series of crafted messages. NOTE: this vulnerability exists because of an incomplete fix for CVE-2011-2487.

IBM Cloud Pak for Security (CP4S) 1.7.0.0, 1.7.1.0, 1.7.2.0, and 1.8.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 207320.

In JetBrains Ktor before 1.4.2, weak cipher suites were enabled by default.

airhost.exe in Zoom Client for Meetings 4.6.11 uses the SHA-256 hash of 0123425234234fsdfsdr3242 for initialization of an OpenSSL EVP AES-256 CBC context. NOTE: the vendor states that this initialization only occurs within unreachable code

In affected versions of Octopus Server it was identified that the same encryption process was used for both encrypting session cookies and variables.

In Brocade SANnav version before SANN2.2.0.2 and Brocade SANNav before 2.1.1.8, the implementation of TLS/SSL Server Supports the Use of Static Key Ciphers (ssl-static-key-ciphers) on ports 443 & 18082.

Assuming a database breach, nonce reuse issues in GitLab 11.6+ allows an attacker to decrypt some of the database's encrypted content

In GLPI before version 9.5.0, the encryption algorithm used is insecure. The security of the data encrypted relies on the password used, if a user sets a weak/predictable password, an attacker could decrypt data. This is fixed in version 9.5.0 by using a more secure encryption library. The library chosen is sodium.

Use of a Broken or Risky Cryptographic Algorithm vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access when credentials are discovered after a brute force attack.

Zoom Client for Meetings through 4.6.9 uses the ECB mode of AES for video and audio encryption. Within a meeting, all participants use a single 128-bit key.

IBM Resilient SOAR V38.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 199238.

IBM API Connect 2018.4.1.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 168510.

IBM Security Guardium 11.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 196280.

In Apache NiFi 1.2.0 to 1.11.4, the NiFi UI and API were protected by mandating TLS v1.2, as well as listening connections established by processors like ListenHTTP, HandleHttpRequest, etc. However intracluster communication such as cluster request replication, Site-to-Site, and load balanced queues continued to support TLS v1.0 or v1.1.

Firmware developed by Shenzhen Hichip Vision Technology (V6 through V20), as used by many different vendors in millions of Internet of Things devices, suffers from cryptographic issues that allow remote attackers to access user session data, as demonstrated by eavesdropping on user video/audio streams, capturing credentials, and compromising devices. This affects products marketed under the following brand names: Accfly, Alptop, Anlink, Besdersec, BOAVISION, COOAU, CPVAN, Ctronics, D3D Security, Dericam, Elex System, Elite Security, ENSTER, ePGes, Escam, FLOUREON, GENBOLT, Hongjingtian (HJT), ICAMI, Iegeek, Jecurity, Jennov, KKMoon, LEFTEK, Loosafe, Luowice, Nesuniq, Nettoly, ProElite, QZT, Royallite, SDETER, SV3C, SY2L, Tenvis, ThinkValue, TOMLOV, TPTEK, WGCC, and ZILINK.

Squirrelmail 4.0 uses the outdated MD5 hash algorithm for passwords.

IBM Security Guardium Insights 2.0.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 184812.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the affected products use a weak cryptographic algorithm, which may allow confidential information to be disclosed.

A CWE-327: Use of a Broken or Risky Cryptographic Algorithm vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to acquire a password by brute force.

Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, The cryptographic function utilized to protect the password in MicroLogix is discoverable.

IBM Data Risk Manager (iDNA) 2.0.6 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 184925.

IBM Spectrum Scale 5.0.0.0 through 5.0.4.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 178423.

IBM Data Risk Manager (iDNA) 2.0.6 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 184927.

IBM Jazz Team Server products use weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 192422.

IBM Emptoris Strategic Supply Management 10.1.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 190989.

IBM Security Guardium 10.5, 10.6, and 11.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 174803.

IBM Planning Analytics Local 2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 179001.

TeeKai Tracking Online 1.0 uses weak encryption of web usage statistics in data/userlog/log.txt, which allows remote attackers to identify IP's visiting the site by dividing each octet by the MD5 hash of '20'.

IBM DataPower Gateway 10.0.0.0 through 10.0.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 189965.

IBM Security Guardium Insights 2.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 174683.

IBM Spectrum Scale 5.0.0.0 through 5.0.4.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 179158.

IBM Security Guardium Insights 2.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 174405.

IBM Security Guardium Big Data Intelligence 1.0 (SonarG) uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 175560.