An exploitable command injection vulnerability exists in the cloud connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject operating system commands into the TimeoutPrepared parameter value contained in the firmware update command.

An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command.

An exploitable remote code execution vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). A specially crafted XML file will direct the Cloud Connectivity service to download and execute a shell script with root privileges.

An exploitable code execution vulnerability exists in the Web-Based Management (WBM) functionality of WAGO PFC 200 03.03.10(15). A specially crafted series of HTTP requests can cause code execution resulting in remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). At 0x1e3f0 the extracted dns value from the xml file is used as an argument to /etc/config-tools/edit_dns_server %s dns-server-nr=%d dns-server-name=<contents of dns node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many dns entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). An attacker can send a specially crafted XML cache file At 0x1e8a8 the extracted domainname value from the xml file is used as an argument to /etc/config-tools/edit_dns_server domain-name=<contents of domainname node> using sprintf().This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send specially crafted packet at 0x1ea48 to the extracted hostname value from the xml file that is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=<contents of ip node> using sprintf().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

A vulnerability in the web-based management allows an unauthenticated remote attacker to inject arbitrary system commands and gain full system control. Those commands are executed with root privileges. The vulnerability is located in the user request handling of the web-based management.

CODESYS V2 runtime system SP before 2.4.7.55 has Improper Neutralization of Special Elements used in an OS Command.

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

In multiple products of WAGO a vulnerability allows an unauthenticated, remote attacker to create new users and change the device configuration which can result in unintended behaviour, Denial of Service and full system compromise.

A command injection was identified on Barco ClickShare Base Unit devices with CSM-1 firmware before 1.7.0.3 and CSC-1 firmware before 1.10.0.10. An attacker with access to the product's web API can exploit this vulnerability to completely compromise the vulnerable device.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiIsolator before version 2.4.6 allows a privileged attacker with super-admin profile and CLI access to execute unauthorized code via specifically crafted HTTP requests.

Tuleap before 9.7 allows command injection via the PhpWiki 1.3.10 SyntaxHighlighter plugin. This occurs in the Project Wiki component because the proc_open PHP function is used within PhpWiki before 1.5.5 with a syntax value in its first argument, and an authenticated Tuleap user can control this value, even with shell metacharacters, as demonstrated by a '<?plugin SyntaxHighlighter syntax="c;id"' line to execute the id command.

A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been rated as critical. Affected by this issue is some unknown functionality of the file /view/vpn/autovpn/sub_commit.php. The manipulation of the argument key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-266246 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Ruijie RG-UAC up to 20240516 and classified as critical. This issue affects some unknown processing of the file /view/systemConfig/sys_user/user_commit.php. The manipulation of the argument email2/user_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266243. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Openfind Mail2000 does not properly filter parameters of specific API. Remote attackers with administrative privileges can exploit this vulnerability to execute arbitrary system commands on the remote server.

An authenticated Remote Code Execution (RCE) vulnerability exists in the AirWave CLI. Successful exploitation of this vulnerability could allow a remote authenticated threat actor to run arbitrary commands as a privileged user on the underlying host.

A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been classified as critical. Affected is an unknown function of the file /view/vpn/autovpn/online.php. The manipulation of the argument peernode leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-266244. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow remote code execution with a single HTTP request by placing shell commands in a "host=" line within HTTP POST data.

In Horde_Crypt before 2.7.6, as used in Horde Groupware Webmail Edition through 5.2.17, OS Command Injection can occur if the attacker is an authenticated Horde Webmail user, has PGP features enabled in their preferences, and attempts to encrypt an email addressed to a maliciously crafted email address.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in David Lingren Media Library Assistant allows Command Injection.This issue affects Media Library Assistant: from n/a through 3.19.

Ruckus Networks Unleashed AP firmware releases before 200.6.10.1.x and Ruckus Networks Zone Director firmware releases 10.1.0.0.x, 9.10.2.0.x, 9.12.3.0.x, 9.13.3.0.x, 10.0.1.0.x or before contain authenticated Root Command Injection in the CLI that could allow authenticated valid users to execute privileged commands on the respective systems.

NfSen before 1.3.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the customfmt parameter (aka the "Custom output format" field).

An issue was discovered in Trend Micro InterScan Messaging Security (Virtual Appliance) 9.1-1600. An authenticated user can execute a terminal command in the context of the web server user (which is root). Besides, the default installation of IMSVA comes with default administrator credentials. The saveCert.imss endpoint takes several user inputs and performs blacklisting. After that, it uses them as arguments to a predefined operating-system command without proper sanitization. However, because of an improper blacklisting rule, it's possible to inject arbitrary commands into it.

Ruckus Networks Solo APs firmware releases R110.x or before and Ruckus Networks SZ managed APs firmware releases R5.x or before contain authenticated Root Command Injection in the web-GUI that could allow authenticated valid users to execute privileged commands on the respective systems.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

In version 3.5 and prior of Cambium Networks ePMP firmware, a lack of input sanitation for certain parameters on the web management console allows any authenticated user (including the otherwise low-privilege readonly user) to inject shell meta-characters as part of a specially-crafted POST request to the get_chart function and run OS-level commands, effectively as root.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an authenticated user can execute arbitrary shell commands over the SSH interface bypassing the CLI interface, which allow them to escalate privileges to root.

A post authentication command injection vulnerability exists in the ipsec policy functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

OS Command Injection in Packagist microweber/microweber prior to 1.2.11.

cgi-bin/cgiServer.exx in Yealink VoIP Phone SIP-T38G allows remote authenticated users to execute arbitrary commands by calling the system method in the body of a request, as demonstrated by running unauthorized services, changing directory permissions, and modifying files.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.

An exploitable vulnerability exists in the notifications functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

OS command injection in the admin web console of Ivanti CSA before version 5.0.5 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SoftAP configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable vulnerability exists in the /api/CONFIG/backup functionality of Circle with Disney. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

An authenticated administrator is allowed to remotely execute arbitrary shell commands via the API.