In CX-One Versions 4.42 and prior (CX-Programmer Versions 9.66 and prior and CX-Server Versions 5.0.23 and prior), when processing project files, the application fails to check if it is referencing freed memory. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

Several use after free vulnerabilities have been identified in CX-Supervisor (Versions 3.42 and prior). When processing project files, the application fails to check if it is referencing freed memory. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

When processing project files in Omron CX-Supervisor Versions 3.4.1.0 and prior, the application fails to check if it is referencing freed memory, which may allow an attacker to execute code under the context of the application.

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to a use after free memory condition while processing a specific project file, which may allow an attacker to execute arbitrary code.

Use after free vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25325.

Use after free vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25230.

Omron CX-One Versions 4.60 and prior, including CX-Server Versions 5.0.29.0 and prior, are vulnerable to a stack-based buffer overflow, which may allow an attacker to execute arbitrary code.

A type confusion vulnerability exists when processing project files in CX-Supervisor (Versions 3.42 and prior). An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

The Omron CX-One Version 4.60 and prior may allow an attacker to supply a pointer to arbitrary memory locations, which may allow an attacker to remotely execute arbitrary code.

Two stack-based buffer overflow vulnerabilities have been discovered in CX-One Versions 4.42 and prior (CX-Programmer Versions 9.66 and prior and CX-Server Versions 5.0.23 and prior). When processing project files, the application allows input data to exceed the buffer. An attacker could use a specially crafted project file to overflow the buffer and execute code under the privileges of the application.

The Omron CX-One Version 4.60 and prior is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.

This vulnerability allows local attackers to execute arbitrary code due to the lack of proper validation of user-supplied data, which can result in a type-confusion condition in the Omron CX-One Version 4.60 and prior devices.

CX-Supervisor (Versions 3.42 and prior) can execute code that has been injected into a project file. An attacker could exploit this to execute code under the privileges of the application.

A type confusion vulnerability exists when processing project files in Omron CX-Supervisor Versions 3.4.1.0 and prior, which may allow an attacker to execute code in the context of the application.

When processing project files in Omron CX-Supervisor Versions 3.4.1.0 and prior and tampering with a specific byte, memory corruption may occur within a specific object.

In Omron CX-Supervisor, Versions 3.5 (12) and prior, Omron CX-Supervisor ships with Teamviewer Version 5.0.8703 QS. This version of Teamviewer is vulnerable to an obsolete function vulnerability requiring user interaction to exploit.

In Omron PLC CJ series, all versions, and Omron PLC CS series, all versions, an attacker could monitor traffic between the PLC and the controller and replay requests that could result in the opening and closing of industrial valves.

Use of hard-coded credentials vulnerability exists in Machine automation controller NJ series all models V 1.48 and earlier, Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, Automation software 'Sysmac Studio' all models V1.49 and earlier, and Programmable Terminal (PT) NA series NA5-15W/NA5-12W/NA5-9W/NA5-7W models Runtime V1.15 and earlier, which may allow a remote attacker who successfully obtained the user credentials by analyzing the affected product to access the controller.

Authentication bypass by capture-replay vulnerability exists in Machine automation controller NJ series all models V 1.48 and earlier, Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, Automation software 'Sysmac Studio' all models V1.49 and earlier, and Programmable Terminal (PT) NA series NA5-15W/NA5-12W/NA5-9W/NA5-7W models Runtime V1.15 and earlier, which may allow a remote attacker who can analyze the communication between the affected controller and automation software 'Sysmac Studio' and/or a Programmable Terminal (PT) to access the controller.

The application (Network Configurator for DeviceNet Safety 3.41 and prior) searches for resources by means of an untrusted search path that could execute a malicious .dll file not under the application's direct control and outside the intended directories.

Three type confusion vulnerabilities exist in CX-One Versions 4.50 and prior and CX-Protocol Versions 2.0 and prior when processing project files. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to multiple stack-based buffer overflow conditions while parsing a specific project file, which may allow an attacker to locally execute arbitrary code.

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to memory corruption while processing a specific project file, which may allow an attacker to execute arbitrary code.

Out-of-bounds write vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-21124.

Omron CX-Position (versions 2.5.3 and prior) is vulnerable to an out-of-bounds write while processing a specific project file, which may allow an attacker to execute arbitrary code.

Out-of-bounds write vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25234.

Out-of-bounds read vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Omron CX-One Versions 4.60 and prior are vulnerable to a stack-based buffer overflow while processing specific project files, which may allow an attacker to execute arbitrary code.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22317 and CVE-2023-22314.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22277 and CVE-2023-22314.

Use after free vulnerability in CX-Drive V3.00 and earlier allows a local attacker to execute arbitrary code by having a user to open a specially crafted file,

Use-after free vulnerability exists in CX-Programmer v.9.77 and earlier, which may lead to information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Opening a specially crafted file could cause the affected product to fail to release its memory reference potentially resulting in arbitrary code execution.

In Omron CX-Supervisor Versions 3.30 and prior, use after free vulnerabilities can be exploited when CX Supervisor parses a specially crafted project file.

Use after free vulnerability exists in CX-Programmer Included in CX-One CXONE-AL[][]D-V4 V9.80 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22277 and CVE-2023-22317.

A use-after-free vulnerability exists in the NMR::COpcPackageReader::releaseZIP() functionality of 3MF Consortium lib3mf 2.0.0. A specially crafted 3MF file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

A maliciously crafted PNG, PDF or DWF file in Autodesk Design Review 2018, 2017, 2013, 2012, 2011 can be used to attempt to free an object that has already been freed while parsing them. This vulnerability may be exploited by remote malicious actors to execute arbitrary code.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 10.1.0.37527. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of U3D objects in PDF files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12294.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 10.1.0.37527. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of U3D objects in PDF files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12295.

Microsoft Excel Remote Code Execution Vulnerability

Use-after-free vulnerability in Google Chrome before 13.0.782.107 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to float removal.

Use-after-free vulnerability in Google Chrome before 13.0.782.107 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the frame loader.

Microsoft Excel Remote Code Execution Vulnerability

A use after free issue has been identified in Fatek FvDesigner Version 1.5.76 and prior in the way the application processes project files, allowing an attacker to craft a special project file that may permit arbitrary code execution.

curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.

A CWE-416: Use After Free vulnerability exists that could cause arbitrary code execution when a malicious *.gd1 configuration file is loaded into the GUIcon tool. Affected Product: Eurotherm by Schneider Electric GUIcon Version 2.0 (Build 683.003) and prior

A use-after-free vulnerability exists in the pushMuxer CreatePushThread functionality of Anker Eufy Homebase 2 2.1.6.9h. A specially-crafted set of network packets can lead to remote code execution.

In PHP versions 7.4.x below 7.4.28, 8.0.x below 8.0.16, and 8.1.x below 8.1.3, when using filter functions with FILTER_VALIDATE_FLOAT filter and min/max limits, if the filter fails, there is a possibility to trigger use of allocated memory after free, which can result it crashes, and potentially in overwrite of other memory chunks and RCE. This issue affects: code that uses FILTER_VALIDATE_FLOAT with min/max limits.

An exploitable use-after-free vulnerability exists in the JavaScript implementation of Nitro Pro PDF. A specially crafted document can cause an object containing the path to a document to be destroyed and then later reused, resulting in a use-after-free vulnerability, which can lead to code execution under the context of the application. An attacker can convince a user to open a document to trigger this vulnerability.