A Buffer Overflow vulnerabiltiy exists in TP-LINK WR-886N 20190826 2.3.8 in thee /cloud_config/router_post/login feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/upgrade_info feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/check_reg_verify_code function which could let a remove malicious user execute arbitrary code via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow triggerPort OS Command Injection (issue 5 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow internalPort OS Command Injection (issue 2 of 5).

On TP-Link TL-WR849N 0.9.1 4.16 devices, a remote command execution vulnerability in the diagnostics area can be exploited when an attacker sends specific shell metacharacters to the panel's traceroute feature.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reg_verify_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request.

oal_ipt_addBridgeIsolationRules on TP-Link TL-WR840N 6_EU_0.9.1_4.16 devices allows OS command injection because a raw string entered from the web interface (an IP address field) is used directly for a call to the system library function (for iptables). NOTE: oal_ipt_addBridgeIsolationRules is not the only function that calls util_execSystem.

Buffer overflow in in the copy_msg_element function for the devDiscoverHandle server in the TP-Link WR and WDR series, including WDR7400, WDR7500, WDR7660, WDR7800, WDR8400, WDR8500, WDR8600, WDR8620, WDR8640, WDR8660, WR880N, WR886N, WR890N, WR890N, WR882N, and WR708N.

TP-LINK device TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin and TL-WDR7660 2.0.30 were discovered to contain a stack overflow via the function deviceInfoRegister.

In the TP-Link RE365 V1_180213, there is a buffer overflow vulnerability due to the lack of length verification for the USER_AGENT field in /usr/bin/httpd. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

Certain TP-Link devices have a Hardcoded Encryption Key. This affects NC200 2.1.9 build 200225, N210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9663.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-9660.

CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow serviceName OS Command Injection (issue 4 of 5).

CMD_FTEST_CONFIG in the TP-Link Device Debug protocol in TP-Link Wireless Router Archer Router version 1.0.0 Build 20180502 rel.45702 (EU) and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow portMappingProtocol OS Command Injection (issue 3 of 5).

TP-Link TL-WPA7510 (EU)_V2_190125 was discovered to contain a stack overflow via the operation parameter at /admin/locale.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the key parameter in the function sub_ 40A774.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function resetCloudPwdRegister.

tdpServer on TP-Link Archer A7 AC1750 devices before 201029 allows remote attackers to execute arbitrary code via the slave_mac parameter. NOTE: this issue exists because of an incomplete fix for CVE-2020-10882 in which shell quotes are mishandled.

A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code.

The default configuration of the TP-Link 8840T router enables web-based administration on the WAN interface, which allows remote attackers to establish an HTTP connection and possibly have unspecified other impact via unknown vectors.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function upgradeInfoRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin and TL-WDR7660 2.0.30 was discovered to contain a stack overflow via the function bindRequestHandle.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function registerRequestHandle.

TP-Link device TL-WDR7660 2.0.30 and TL-WR886N 2.0.12 has a stack overflow vulnerability via the function upgradeInfoJsonToBin.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function getResetVeriRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function modifyAccPwdRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function loginRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function chkRegVeriRegister.

The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to a denial of service when an unauthenticated LAN user sends a crafted HTTP header containing an unexpected Referer field.

TP-Link TL-WA850RE Wi-Fi Range Extender with hardware version 5 allows remote attackers to cause a denial of service (reboot) via data/reboot.json.

TP-LINK IPC TL-IPC223(P)-6, TL-IPC323K-D, TL-IPC325(KP)-*, and TL-IPC40A-4 devices allow authenticated remote code execution via crafted JSON data because /usr/lib/lua/luci/torchlight/validator.lua does not block various punctuation characters.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow DoSing the HTTP server via a crafted Cookie header to the /cgi/ansi URI.

A lack of proper input validation in the HTTP processing path in TP-Link Archer BE230 v1.2 (web modules) may allow a crafted request to cause the device’s web service to become unresponsive, resulting in a denial of service condition. A network adjacent attacker with high privileges could cause the device’s web interface to temporarily stop responding until it recovers or is rebooted. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

By sending crafted files to the firmware update endpoint of Tapo C220 v1 and C520WS v2, the device terminates core system services before verifying authentication or firmware integrity. An unauthenticated attacker can trigger a persistent denial of service, requiring a manual reboot or application initiated restart to restore normal device operation.

The HTTP parser of Tapo C210 v3, C220 v1 and C520WS v2 cameras improperly handles requests containing an excessively long URL path. An invalid‑URL error path continues into cleanup code that assumes allocated buffers exist, leading to a crash and service restart. An unauthenticated attacker can force repeated service crashes or device reboots, causing denial of service.

The backup restore function does not properly validate unexpected or unrecognized tags within the backup file. When such a crafted file is restored, the injected tag is interpreted by a shell, allowing execution of arbitrary commands with root privileges. Successful exploitation allows the attacker to gain root-level command execution, compromising confidentiality, integrity and availability.

A Denial-of-Service (DoS) vulnerability in the httpd component of TP-Link's TD-W8961N v4.0 due to improper input sanitization, allows crafted requests to trigger a processing error that causes the httpd service to crash. Successful exploitation may allow the attacker to cause service interruption, resulting in a DoS condition.

A Null Pointer Dereference vulnerability exists in the referer header check of the web portal of TP-Link TL-WR841N v14, caused by improper input validation.  A remote, unauthenticated attacker can exploit this flaw and cause Denial of Service on the web portal service.This issue affects TL-WR841N v14: before 250908.

A denial-of-service (DoS) vulnerability was identified in Omada EAP610 v3. An attacker with adjacent network access can send crafted requests to cause the device’s HTTP service to crash. This results in temporary service unavailability until the device is rebooted. This issue affects Omada EAP610 firmware versions prior to 1.6.0.