D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active.

An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is use of weak ciphers for SSH such as diffie-hellman-group1-sha1.

D-Link DIR-823X firmware - 240126 was discovered to contain a remote command execution (RCE) vulnerability via the dhcpd_startip parameter at /goform/set_lan_settings.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the tomography_ping_address parameter in /HNAP1/ interface.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. It contains an execute_cmd.cgi feature (that is not reachable via the web user interface) that lets an authenticated user execute Operating System commands.

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload.

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp.

OS Command injection vulnerability in D-Link DIR-867 DIR_867_FW1.30B07 allows attackers to execute arbitrary commands via a crafted LocalIPAddress parameter for the SetVirtualServerSettings to HNAP1.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 1.04B03_HOTFIX WiFi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10084.

D-Link DIR_878_FW1.30B08 was discovered to contain a command injection vulnerability via the component /SetNetworkSettings/SubnetMask. This vulnerability allows attackers to escalate privileges to root via a crafted payload.

D-Link DIR-846 Firmware FW100A53DBR was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

D-Link DHP-W310AV 3.10EU was discovered to contain a command injection vulnerability via the System Checks function.

A command injection vulnerability has been found on D-Link DIR-823G devices with firmware version 1.02B03 that allows an attacker to execute arbitrary operating system commands through well-designed /HNAP1 requests. Before the HNAP API function can process the request, the system function executes an untrusted command that triggers the vulnerability.

D-Link DIR823G 1.02B05 is vulnerable to Commad Injection.

D-Link DIR878 1.30B08 Hotfix_04 was discovered to contain a command injection vulnerability via the component /bin/proc.cgi.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Vimeo plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19463.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv6Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv6List element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16145.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysEmailSettings requests to the web management portal. When parsing subelements within the SetSysEmailSettings element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16149.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetQoSSettings requests to the web management portal. When parsing subelements within the QoSInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16153.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Dreambox plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19461.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv6FirewallSettings requests to the web management portal. When parsing subelements within the IPv6FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16148.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysLogSettings requests to the web management portal. When parsing the IPAddress element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16154.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Generic plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19460.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19464.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15905.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd_generic.lua plugin for the xupnpd service, which listens on TCP port 4044 by default. When parsing the feed parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15906.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Dreambox plugin for the xupnpd service, which listens on TCP port 4044 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the router. Was ZDI-CAN-15935.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

D-Link DIR-816 A2_v1.10CNB04.img is vulnerable to Command Injection via /goform/SystemCommand. After the user passes in the command parameter, it will be spliced into byte_4836B0 by snprintf, and finally doSystem(&byte_4836B0); will be executed, resulting in a command injection.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB04 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setDeviceSettings of the component Web Interface. The manipulation of the argument statuscheckpppoeuser leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252139.

D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

D-Link G416 cfgsave Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21286.

An issue discovered in D-Link dir815 v.1.01SSb08.bin allows a remote attacker to execute arbitrary code via a crafted POST request to the service parameter in the soapcgi_main function of the cgibin binary component.

D-Link DCS-8300LHV2 ONVIF SetSystemDateAndTime Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DCS-8300LHV2 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the implementation of the ONVIF API, which listens on TCP port 80. When parsing the sch:TZ XML element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21319.