Cisco Linksys E4200 1.0.05 Build 7 devices store passwords in cleartext allowing remote attackers to obtain sensitive information.

Phicomm K2 v22.6.534.263 was discovered to store the root and admin passwords in plaintext.

A cleartext storage in a file or on disk (CWE-313) vulnerability in FortiOS SSL VPN 6.2.0 through 6.2.2, 6.0.9 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an attacker to retrieve a logged-in SSL VPN user's credentials should that attacker be able to read the session file stored on the targeted device's system.

Phicomm K2G v22.6.3.20 was discovered to store the root and admin passwords in plaintext.

Cleartext Storage of Sensitive Information in a Cookie vulnerability in Oceanic Software ValeApp allows Protocol Manipulation, : JSON Hijacking (aka JavaScript Hijacking). This issue affects ValeApp: before v2.0.0.

Binardat 10G08-0800GSM network switch firmware versions prior to V300SP10260209 store a user password in a client-side cookie as a Base64-encoded value accessible via the web interface. Because Base64 is reversible and provides no confidentiality, an attacker who can access the cookie value can recover the plaintext password.

When using public dashboards and direct data-sources, all direct data-sources' passwords are exposed despite not being used in dashboards. No passwords of proxied data-sources are exposed. We encourage all direct data-sources to be converted to proxied data-sources as far as possible to improve your deployments' security.

A security vulnerability exists in Zingbox Inspector versions 1.294 and earlier, that results in passwords for 3rd party integrations being stored in cleartext in device configuration.

An issue was discovered on FiberHome HG6245D devices through RP2613. wifi_custom.cfg has cleartext passwords and 0644 permissions.

The web-based Management Console in Blue Coat Security Gateway OS 3.0 through 3.1.3.13 and 3.2.1, when importing a private key, stores the key and its passphrase in plaintext in a log file, which allows attackers to steal digital certificates.

The PassWork extension 5.0.9 for Chrome and other browsers allows an attacker to obtain the cleartext master password.

IBM Maximo Asset Management 7.6.1.2 and 7.6.1.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 237587.

The PassWork extension 5.0.9 for Chrome and other browsers allows an attacker to obtain cleartext cached credentials.

The vulnerability exists in BLUVOYIX due to an improper password storage implementation and subsequent exposure via unauthenticated APIs. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable users API to retrieve the plaintext passwords of all user users. Successful exploitation of this vulnerability could allow the attacker to gain full access to customers' data and completely compromise the targeted platform by logging in using an exposed admin email address and password.

A vulnerability has been reported to affect QNAP NAS. If exploited, this vulnerability allows an attacker to access sensitive information stored in cleartext inside cookies via certain widely-available tools. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later) QuTScloud c4.5.2.1379 build 20200730 (and later)

The Zalora application 6.15.1 for Android stores confidential information insecurely on the system (i.e. plain text), which allows a non-root user to find out the username/password of a valid user via /data/data/com.zalora.android/shared_prefs/login_data.xml.

Ceph does not properly sanitize encryption keys in debug logging for v4 auth. This results in the leaking of encryption key information in log files via plaintext. Versions up to v13.2.4 are vulnerable.

mintplex-labs/anything-llm version latest contains a vulnerability where sensitive information, specifically a password, is improperly stored within a JWT (JSON Web Token) used as a bearer token in single user mode. When decoded, the JWT reveals the password in plaintext. This improper storage of sensitive information poses significant security risks, as an attacker who gains access to the JWT can easily decode it and retrieve the password. The issue is fixed in version 1.0.3.

An issue was discovered in WeCube Platform 3.2.2. Cleartext passwords are displayed in the configuration for terminal plugins.

bilde2910 Hauk v1.6.1 requires a hardcoded password which by default is blank. This hardcoded password is hashed but stored within the config.php file server-side as well as in clear-text on the android client device by default.

Cleartext Storage of Sensitive Information vulnerability in NAC Telecommunication Systems Inc. NACPremium allows Retrieve Embedded Sensitive Data. This issue affects NACPremium: through 01082024.

Mobile Spy (1) stores login credentials in cleartext under the RetinaxStudios registry key, and (2) sends login credentials and log data over a cleartext HTTP connection, which allows attackers to obtain sensitive information by reading the registry or sniffing the network.

LOYTEC electronics GmbH LINX-212 and LINX-151 devices (all versions) are vulnerable to Insecure Permissions via dpal_config.zml file. This vulnerability allows remote attackers to disclose smtp client account credentials and bypass email authentication.

In DPA 2022.4 and older releases, generated heap memory dumps contain sensitive information in cleartext.

Flock Safety Falcon and Sparrow License Plate Readers OPM1.171019.026 ship with development Wi-Fi credentials (test_flck) stored in cleartext in production firmware.

An issue in ZPE Systems, Inc Nodegrid OS v.5.8.10 thru v.5.8.13 and v.5.10.3 thru v.5.10.5 allows a remote attacker to obtain sensitive information via the TACACS+ server component.

Fujitsu Software Infrastructure Manager (ISM) stores sensitive information at the product's maintenance data (ismsnap) in cleartext form. As a result, the password for the proxy server that is configured in ISM may be retrieved. Affected products and versions are as follows: Fujitsu Software Infrastructure Manager Advanced Edition V2.8.0.060, Fujitsu Software Infrastructure Manager Advanced Edition for PRIMEFLEX V2.8.0.060, and Fujitsu Software Infrastructure Manager Essential Edition V2.8.0.060.

IBM QRadar SIEM 7.4 and 7.5 is vulnerable to information exposure allowing a non-tenant user with a specific domain security profile assigned to see some data from other domains. IBM X-Force ID: 230402.

Lanling OA Landray Office Automation (OA) internal patch number #133383/#137780 contains an arbitrary file read vulnerability via the component /sys/ui/extend/varkind/custom.jsp.

A vulnerability was found in Intergard SGS 8.7.0. It has been classified as problematic. This affects an unknown part. The manipulation leads to cleartext storage of sensitive information in memory. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-234447. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In Omron CS series, CJ series, and CP series PLCs through 2022-05-18, the password for access to the Web UI is stored in memory area D1449...D1452 and can be read out using the Omron FINS protocol without any further authentication.

Browsing the path: http://ip/wifi_ap_pata_get.cmd, will show in the name of the existing access point on the component, and a password in clear text.

The Motorola MOSCAD Toolbox software through 2022-05-02 relies on a cleartext password. It utilizes an MDLC driver to communicate with MOSCAD/ACE RTUs for engineering purposes. Access to these communications is protected by a password stored in cleartext in the wmdlcdrv.ini driver configuration file. In addition, this password is used for access control to MOSCAD/STS projects protected with the Legacy Password feature. In this case, an insecure CRC of the password is present in the project file: this CRC is validated against the password in the driver configuration file.

Cleartext Storage of Sensitive Information vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A to 1.087R and Motion Control Setting(GX Works3 related software) versions from 1.000A to 1.042U allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users may view programs and project files or execute programs illegally.

A vulnerability, which was classified as problematic, was found in SourceCodester Guest Management System. Affected is an unknown function. The manipulation leads to cleartext storage of passwords in the database. The identifier of this vulnerability is VDB-206400.

Cleartext Storage of Sensitive Information vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A to 1.095Z and Mitsubishi Electric MX OPC UA Module Configurator-R versions 1.08J and prior allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated attackers can gain unauthorized access to the MELSEC CPU module and the MELSEC OPC UA server module.

The firmwaredownload command on Brocade Fabric OS v9.2.0 could log the FTP/SFTP/SCP server password in clear text in the SupportSave file when performing a downgrade from Fabric OS v9.2.0 to any earlier version of Fabric OS.

The /device/signin end-point for the Ourphoto App version 1.4.1 discloses clear-text password information for functionality within the picture frame devices. The deviceVideoCallPassword and mqttPassword are returned in clear-text. The lack of sessions management and presence of insecure direct object references allows to return password information for other end-users devices. Many of the picture frame devices offer video calling, and it is likely this information can be used to abuse that functionality.

An issue found in ALBIS Co. ALBIS v.13.6.1 allows a remote attacker to gain access to sensitive information via the channel access token in the miniapp ALBIS function.

react-native-keys 0.7.11 is vulnerable to sensitive information disclosure (remote) as encryption cipher and Base64 chunks are stored as plaintext in the compiled native binary. Attackers can extract these secrets using basic static analysis tools.

In the configuration file of racoon in the TRENDnet TEW-WLC100P 2.03b03, the first item of exchage_mode is set to aggressive. Aggressive mode in IKE Phase 1 exposes identity information in plaintext, is vulnerable to offline dictionary attacks, and lacks flexibility in negotiating security parameters.

Cleartext Storage of Sensitive Information in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to potentially steal user credentials that are stored in the user’s browsers local storage via cross-site-scripting attacks.

EnterpriseDB EDB Postgres Advanced Server (EPAS) before 14.6.0 logs unredacted passwords in situations where optional parameters are used with CREATE/ALTER USER/GROUP/ROLE, and redacting was configured with edb_filter_log.redact_password_commands. The fixed versions are 10.23.33, 11.18.29, 12.13.17, 13.9.13, and 14.6.0.

Multi-Remote Next Generation Connection Manager (mRemoteNG) is free software that enables users to store and manage multi-protocol connection configurations to remotely connect to systems. mRemoteNG configuration files can be stored in an encrypted state on disk. mRemoteNG version <= v1.76.20 and <= 1.77.3-dev loads configuration files in plain text into memory (after decrypting them if necessary) at application start-up, even if no connection has been established yet. This allows attackers to access contents of configuration files in plain text through a memory dump and thus compromise user credentials when no custom password encryption key has been set. This also bypasses the connection configuration file encryption setting by dumping already decrypted configurations from memory.

The Danfoss AK-EM100 stores login credentials in cleartext.

An issue was discovered in SysPasswordDxe in Insyde InsydeH2O with kernel 5.0 through 5.5. System password information could optionally be stored in cleartext, which might lead to possible information disclosure.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

Ribose RNP before 0.16.3 sometimes lets secret keys remain unlocked after use.

An access control issue in Makves DCAP v3.0.0.122 allows unauthenticated attackers to obtain cleartext credentials via a crafted web request to the product API.

An Cleartext Storage of Sensitive Information issue was discovered in General Motors (GM) and Shanghai OnStar (SOS) SOS iOS Client 7.1. Successful exploitation of this vulnerability may allow a remote attacker to access an encryption key that is stored in cleartext in memory.