TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

Trendnet AC2600 TEW-827DRU version 2.08B01 is vulnerable to command injection. The system log functionality of the firmware allows for command injection as root by supplying a malformed parameter.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains a command injection vulnerability in the smb functionality of the device. The username parameter used when configuring smb functionality for the device is vulnerable to command injection as root.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TRENDnet WiFi Baby Cam TV-IP743SIC has a password of admin for the backdoor root account.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow vulnerability via the submit-url parameter at /formSysLog .

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the newpass parameter at /formPasswordSetup. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the username parameter at /formWizardPassword. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action set_sta_enrollee_pin_wifi1 (or set_sta_enrollee_pin_wifi0) with a sufficiently long wps_sta_enrollee_pin key.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action wifi_captive_portal_login with a sufficiently long REMOTE_ADDR key.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action st_dev_connect, st_dev_disconnect, or st_dev_rconnect with a sufficiently long wan_type key.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formSysLog. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formSystemCheck. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formPasswordAuth. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow vulnerability via the submit-url parameter at /formPasswordAuth .

There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.config.smb_admin_name in the apply.cgi interface, thereby gaining root shell privileges.

A stack overflow vulnerability exists in TrendNet Wireless AC Easy-Upgrader TEW-820AP (Version v1.0R, firmware version 1.01.B01) which may result in remote code execution.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action auto_up_fw (or auto_up_lp) with a sufficiently long update_file_name key.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action kick_ban_wifi_mac_allow with a sufficiently long qcawifi.wifi0_vap0.maclist key.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a hardcoded password vulnerability in /etc/shadow.sample, which allows attackers to log in as root.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TRENDnet TEW755AP 1.13B01 was discovered to contain a command injection vulnerability via the wps_sta_enrollee_pin parameter in the action set_sta_enrollee_pin_5g function.

An issue was discovered in libremote_dbg.so on TRENDnet TV-IP1314PI 5.5.3 200714 devices. Filtering of debug information is mishandled during use of popen. Consequently, an attacker can bypass validation and execute a shell command.

TRENDnet TEW-812DRU router allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) wan network prefix to internet/ipv6.asp; (2) remote port to adm/management.asp; (3) pptp username, (4) pptp password, (5) ip, (6) gateway, (7) l2tp username, or (8) l2tp password to internet/wan.asp; (9) NtpDstStart, (10) NtpDstEnd, or (11) NtpDstOffset to adm/time.asp; or (12) device url to adm/management.asp. NOTE: vectors 9, 10, and 11 can be exploited by unauthenticated remote attackers by leveraging CVE-2013-3098.

An issue was found on TRENDnet TEW-831DR 1.0 601.130.1.1356 devices. An OS injection vulnerability exists within the web interface, allowing an attacker with valid credentials to execute arbitrary shell commands.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the TCP Ports To Open in Add Gaming Rule.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the key passwd in Routing RIP Settings.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the action set_sta_enrollee_pin_5g and the key wps_sta_enrollee_pin.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Virtual Server.

TRENDnet TEW755AP 1.13B01 was discovered to contain a command injection vulnerability via the sys_service parameter in the setup_wizard_mydlink (sub_4104B8) function.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the Private Port in Add Virtual Server.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains multiple command injections when processing user input for the setup wizard, allowing an unauthenticated user to run arbitrary commands on the device. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled.

An issue was discovered on TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices. OS command injection occurs through the get_set.ccp lanHostCfg_HostName_1.1.1.0.0 parameter.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users with access to the nslookup functionality to execute arbitrary commands with root privileges via the graph parameter to diagnosis_control.php.

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.

An OS command injection vulnerability in FortiWeb's management interface 6.3.7 and below, 6.2.3 and below, 6.1.x, 6.0.x, 5.9.x may allow a remote authenticated attacker to execute arbitrary commands on the system via the SAML server configuration page.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

MiR software versions prior to version 3.0.0 are affected by a command injection vulnerability. A malicious HTTP request crafted by an authenticated user could allow the execution of arbitrary commands on the underlying operating system.

Remote command execution (RCE) vulnerability in Nagios XI 5.2.x through 5.4.x before 5.4.13 allows an attacker to execute arbitrary commands on the target system, aka OS command injection.

Unitronics Unistream Unilogic – Versions prior to 1.35.227 - CWE-78: 'OS Command Injection' may allow RCE