A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the Brocade SANnav password in clear text in supportsave logs when a user schedules a switch Supportsave from Brocade SANnav.

A password management vulnerability in Skyhigh Secure Web Gateway (SWG) in main releases 11.x prior to 11.2.14, 10.x prior to 10.2.25 and controlled release 12.x prior to 12.2.1, allows some authentication information stored in configuration files to be extracted through SWG REST API. This was possible due to SWG storing the password in plain text in some configuration files.

SnapCenter versions prior to 5.0p1 are susceptible to a vulnerability which could allow an authenticated attacker to discover plaintext credentials.

Some PON MDU devices of ZTE stored sensitive information in plaintext, and users with login authority can obtain it by inputing command. This affects: ZTE PON MDU device ZXA10 F821 V1.7.0P3T22, ZXA10 F822 V1.4.3T6, ZXA10 F819 V1.2.1T5, ZXA10 F832 V1.1.1T7, ZXA10 F839 V1.1.0T8, ZXA10 F809 V3.2.1T1, ZXA10 F822P V1.1.1T7, ZXA10 F832 V2.00.00.01

A vulnerability identified in storing and reusing information in Advance Authentication. This issue can lead to leakage of sensitive data to unauthorized user. The issue affects NetIQ Advance Authentication before 6.3.5.1

An issue has been discovered in GitLab affecting all versions starting from 11.6. Pull mirror credentials are exposed that allows other maintainers to be able to view the credentials in plain-text,

During installation or upgrade to Software House C•CURE 9000 v2.70 and American Dynamics victor Video Management System v5.2, the credentials of the user used to perform the installation or upgrade are logged in a file. The install log file persists after the installation.

The BIG-IP and BIG-IQ systems do not encrypt some sensitive information written to Database (DB) variables.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A cleartext storage of sensitive information vulnerability in FortiOS command line interface in versions 6.2.4 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an authenticated attacker to obtain sensitive information such as users passwords by connecting to FortiGate CLI and executing the "diag sys ha checksum show" command.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0), SiNVR/SiVMS Video Server (All versions < V5.0.0). The FTP services of the SiVMS/SiNVR Video Server and the Control Center Server (CCS) maintain log files that store login credentials in cleartext. In configurations where the FTP service is enabled, authenticated remote attackers could extract login credentials of other users of the service.

In Centreon Web through 2.8.29, disclosure of external components' passwords allows authenticated attackers to move laterally to external components.

An issue was discovered in MariaDB MaxScale before 23.02.3. A user enters an encrypted password on a "maxctrl create service" command line, but this password is then stored in cleartext in the resulting .cnf file under /var/lib/maxscale/maxscale.cnf.d. The fixed versions are 2.5.28, 6.4.9, 22.08.8, and 23.02.3.

A vulnerability was found in business-central, as shipped in rhdm-7.5.1 and rhpam-7.5.1, where encoded passwords are stored in errai_security_context. The encoding used for storing the passwords is Base64, not an encryption algorithm, and any recovery of these passwords could lead to user passwords being exposed.

A cleartext password storage issue was discovered in Katello, versions 3.x.x.x before katello 3.12.0.9. Registry credentials used during container image discovery were inadvertently logged without being masked. This flaw could expose the registry credentials to other privileged users.

NETSAS Enigma NMS 65.0.0 and prior does not encrypt sensitive data stored within the SQL database. It is possible for an attacker to expose unencrypted sensitive data.

A vulnerability was found in Intergard SGS 8.7.0. It has been classified as problematic. This affects an unknown part. The manipulation leads to cleartext storage of sensitive information in memory. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-234447. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the Server Utilities of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to gain unauthorized access to sensitive user information from the configuration data that is stored on the affected system. The vulnerability is due to insufficient protection of data in the configuration file. An attacker could exploit this vulnerability by downloading the configuration file. An exploit could allow the attacker to use the sensitive information from the file to elevate privileges.

CodeIgniter Shield is an authentication and authorization provider for CodeIgniter 4. The `secretKey` value is an important key for HMAC SHA256 authentication and in affected versions was stored in the database in cleartext form. If a malicious person somehow had access to the data in the database, they could use the key and secretKey for HMAC SHA256 authentication to send requests impersonating that corresponding user. This issue has been addressed in version 1.0.0-beta.8. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The Nautobot Device Onboarding plugin uses the netmiko and NAPALM libraries to simplify the onboarding process of a new device into Nautobot down to, in many cases, an IP Address and a Location. Starting in version 2.0.0 and prior to version 3.0.0, credentials provided to onboarding task are visible via Job Results from an execution of an Onboarding Task. Version 3.0.0 fixes this issue; no known workarounds are available. Mitigation recommendations include deleting all Job Results for any onboarding task to remove clear text credentials from database entries that were run while on v2.0.X, upgrading to v3.0.0, and rotating any exposed credentials.

The administrative passwords for all versions of Bond JetSelect are stored within an unprotected file on the filesystem, rather than encrypted within the MySQL database. This backup copy of the passwords is made as part of the installation script, after the administrator has generated a password using ENCtool.jar (see CVE-2019-13022). This allows any low-privilege user who can read this file to trivially obtain the passwords for the administrative accounts of the JetSelect application. The path to the file containing the encoded password hash is /opt/JetSelect/SFC/resources/sfc-general-properties.

Jenkins Caliper CI Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Brocade SANnav before v2.3.0 and v2.2.2a stores SNMPv3 Authentication passwords in plaintext. A privileged user could retrieve these credentials with knowledge and access to these log files. SNMP credentials could be seen in SANnav SupportSave if the capture is performed after an SNMP configuration failure causes an SNMP communication log dump.

The App Settings (/admin/app) page in GROWI versions prior to v6.0.6 stores sensitive information in cleartext form. As a result, the Secret access key for external service may be obtained by an attacker who can access the App Settings page.

Jenkins Port Allocator Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins SOASTA CloudTest Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Gogs Plugin stored credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins View26 Test-Reporting Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins NeoLoad Plugin 2.2.5 and earlier stored credentials unencrypted in its global configuration file and in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.

Jenkins iceScrum Plugin 1.1.4 and earlier stored credentials unencrypted in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.

Jenkins Fortify on Demand Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins Consul KV Builder Plugin 2.0.13 and earlier does not mask the HashiCorp Consul ACL Token on the global configuration form, increasing the potential for attackers to observe and capture it.

KDE Messagelib through 5.17.0 reveals cleartext of encrypted messages in some situations. Deleting an attachment of a decrypted encrypted message stored on a remote server (e.g., an IMAP server) causes KMail to upload the decrypted content of the message to the remote server. With a crafted message, a user could be tricked into decrypting an encrypted message and then deleting an attachment attached to this message. If the attacker has access to the messages stored on the email server, then the attacker could read the decrypted content of the encrypted message. This occurs in ViewerPrivate::deleteAttachment in messageviewer/src/viewer/viewer_p.cpp.

The Momo application 2.1.9 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user and a user's access token via Logcat.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The user configuration menu in the web interface of the Control Center Server (CCS) transfers user passwords in clear to the client (browser). An attacker with administrative privileges for the web interface could be able to read (and not only reset) passwords of other CCS users.

An internal product security audit of Lenovo XClarity Controller (XCC) discovered that the XCC configuration backup/restore password may be written to an internal XCC log buffer if Lenovo XClarity Administrator (LXCA) is used to perform the backup/restore. The backup/restore password typically exists in this internal log buffer for less than 10 minutes before being overwritten. Generating an FFDC service log will include the log buffer contents, including the backup/restore password if present. The FFDC service log is only generated when requested by a privileged XCC user and it is only accessible to the privileged XCC user that requested the file. The backup/restore password is not captured if the backup/restore is initiated directly from XCC.

IBM Security Guardium 11.2 discloses sensitive information in the response headers that could be used in further attacks against the system. IBM X-Force ID: 174850.

In Rapid7 Komand version 0.41.0 and prior, certain endpoints that are able to list the always encrypted-at-rest connection data could return some configurations of connection data without obscuring sensitive data from the API response sent over an encrypted channel. This issue does not affect Rapid7 Komand version 0.42.0 and later versions.

IBM Security Secret Server 10.6 stores potentially sensitive information in config files that could be read by an authenticated user. IBM X-Force ID: 190048.

Cleartext storage of sensitive information exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote authenticated attacker to obtain an APN credential for the product.

The Send Anywhere application 9.4.18 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user via /data/data/com.estmob.android.sendanywhere/shared_prefs/sendanywhere_device.xml.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

Nextcloud mail is an email app for the nextcloud home server platform. In versions prior to 2.2.2 user's passwords were stored in cleartext in the database during the duration of OAuth2 setup procedure. Any attacker or malicious user with access to the database would have access to these user passwords until the OAuth setup has been completed. It is recommended that the Nextcloud Mail app is upgraded to 2.2.2. There are no known workarounds for this issue.

IBM Security Identity Manager 7.0.2 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 199998.

Information disclosure vulnerability exists in Pgpool-II 4.4.0 to 4.4.1 (4.4 series), 4.3.0 to 4.3.4 (4.3 series), 4.2.0 to 4.2.11 (4.2 series), 4.1.0 to 4.1.14 (4.1 series), 4.0.0 to 4.0.21 (4.0 series), All versions of 3.7 series, All versions of 3.6 series, All versions of 3.5 series, All versions of 3.4 series, and All versions of 3.3 series. A specific database user's authentication information may be obtained by another database user. As a result, the information stored in the database may be altered and/or database may be suspended by a remote attacker who successfully logged in the product with the obtained credentials.

Jenkins Nouvola DiveCloud Plugin 1.08 and earlier stores DiveCloud API Keys and Credentials Encryption Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

IBM Maximo Asset Management 7.6 could allow a an authenticated user to replace a target page with a phishing site which could allow the attacker to obtain highly sensitive information. IBM X-Force ID: 155554.

Jenkins Applitools Eyes Plugin 1.16.5 and earlier stores Applitools API keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

A vulnerability in the logging component of Cisco Duo Authentication Proxy could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability exists because certain unencrypted credentials are stored. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to view sensitive information in clear text.

Jenkins Kryptowire Plugin 0.2 and earlier stores the Kryptowire API key unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

The fix in 4.6.16, 4.7.9, 4.8.4 and 4.9.7 for CVE-2018-10919 Confidential attribute disclosure vi LDAP filters was insufficient and an attacker may be able to obtain confidential BitLocker recovery keys from a Samba AD DC.