An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. There is a stack-based buffer overflow allowing remote attackers to execute arbitrary code without authentication via the goform/formLanguageChange currTime parameter.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been declared as critical. This vulnerability affects the function ctxz_asp of the file /ctxz.asp of the component Connection Limit Page. The manipulation of the argument def/defTcp/defUdp/defIcmp/defOther leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A stack-based buffer overflow was found on the D-Link DIR-842 REVC with firmware v3.13B09 HOTFIX due to the use of strcpy for LOGINPASSWORD when handling a POST request to the /MTFWU endpoint.

D-Link DIR878 DIR_878_FW120B05 was discovered to contain a stack overflow in the sub_48AF78 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formWPS.

A vulnerability was found in D-Link DI-8100 up to 16.07.26A1 and classified as critical. This issue affects some unknown processing of the file /ddos.asp of the component jhttpd. The manipulation of the argument def_max/def_time/def_tcp_max/def_tcp_time/def_udp_max/def_udp_time/def_icmp_max leads to stack-based buffer overflow. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult.

D-Link DIR-X3260 prog.cgi SetMyDLinkRegistration Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21667.

D-Link DIR-X3260 prog.cgi SetWLanRadioSecurity Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21595.

D-Link DIR-X3260 prog.cgi SetQuickVPNSettings PSK Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21592.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been rated as critical. This issue affects the function auth_asp of the file /auth.asp of the component jhttpd. The manipulation of the argument callback leads to stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used.

D-Link G416 cfgsave Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21442.

An issue was discovered in /bin/mini_upnpd on D-Link DIR-619L 2.06beta devices. There is a heap buffer overflow allowing remote attackers to restart router via the M-search request ST parameter. No authentication required

D-Link G416 httpd API-AUTH Digest Processing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21662.

Stack-based buffer overflow in the websRedirect function in GoAhead on D-Link DIR-816 A2 (CN) routers with firmware version 1.10B05 allows unauthenticated remote attackers to execute arbitrary code via a request with a long HTTP Host header.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the fn parameter of the file.data function.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the ip/type parameter of the jingx.asp function.

Buffer Overflow vulnerability in D-Link device DI-7003GV2.D1 v.23.08.25D1 and before, DI-7100G+V2.D1 v.23.08.23D1 and before, DI-7100GV2.D1 v.23.08.23D1, DI-7200G+V2.D1 v.23.08.23D1 and before, DI-7200GV2.E1 v.23.08.23E1 and before, DI-7300G+V2.D1 v.23.08.23D1, and DI-7400G+V2.D1 v.23.08.23D1 and before allows a remote attacker to execute arbitrary code via the wild/mx and other parameters of the ddns.asp function

D-Link DAP-1325 SetAPLanSettings Mode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18828.

D-Link DIR-3040 prog.cgi SetQuickVPNSettings PSK Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21623.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticDefaultGateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18834.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWAN_Wizard7 function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanPPPoE function.

D-Link DIR-820L 1.05B03 has a stack overflow vulnerability in the cancelPing function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanPPTP function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWAN_Wizard55 function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formLanguageChange function.

D-Link DAP-1325 SetAPLanSettings DeviceName Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18825.

D-Link DAP-1325 get_value_from_app Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18823.

D-Link DIR-3040 prog.cgi SetUsersSettings Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21654.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanL2TP function.

D-Link DAP-1325 get_value_of_key Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18824.

D-Link DAP-1325 SetAPLanSettings IPAddr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18827.

D-Link DIR-3040 prog.cgi SetTriggerPPPoEValidate Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed-size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21653.

D-Link DAP-1325 SetHostIPv6Settings IPv6Mode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18832.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via websGetVar function.

D-Link DIR-X3260 Prog.cgi Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver. The issue results from the lack of proper validation of the length an user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20727.

D-Link DAP-1325 SetAPLanSettings Gateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18826.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanDhcpplus function.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the popupId parameter in the H5/hi_block.asp function.

D-Link DIR-823G v1.0.2B05 was discovered to contain a stack overflow via parameter TXPower and GuardInt in SetWLanRadioSecurity.

D-Link DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the zn_jb parameter in the arp_sys.asp function.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the id parameter in the yyxz.data function.

D-Link DIR-3040 HTTP Request Processing Referer Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21674.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a stack overflow vulnerability in the function update_users.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the fn parameter in the tgfile.asp function.

D-Link DIR-816 A2 v1.10CNB05 was discovered to contain a stack overflow via parameter removeRuleList in form2IPQoSTcDel.

D-Link DIR-816 A2 v1.10CNB05 was discovered to contain a stack overflow via parameter nvmacaddr in form2Dhcpip.cgi.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the prev parameter in the H5/login.cgi function.

D-Link DAP-1325 SetAPLanSettings SubnetMask Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18831.