Edimax GS-5008PL firmware version 1.00.54 and prior use cleartext HTTP for the web management interface without implementing TLS or SSL encryption. Attackers on the same network can intercept management traffic to capture administrator credentials and sensitive configuration data.

The API in the Push extension for MediaWiki through 1.35 used cleartext for ApiPush credentials, allowing for potential information disclosure.

Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.

Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.

Cleartext Transmission of Sensitive Information vulnerability in Apache APISIX. This can occur due to `ssl_verify` in openid-connect plugin configuration being set to false by default. This issue affects Apache APISIX: from 0.7 through 3.15.0. Users are recommended to upgrade to version 3.16.0, which fixes the issue.

The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.

The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).

TOTOLINK X5000R v9.1.0u.6118_B20201102 was discovered to use the HTTP protocol for authentication into the admin interface, allowing attackers to intercept user credentials via packet capture software.

Hitachi Vantara Pentaho Business Analytics Server versions before 9.3.0.0, 9.2.0.2 and 8.3.0.25 with the Data Lineage feature enabled transmits database passwords in clear text.   The transmission of sensitive data in clear text allows unauthorized actors with access to the network to sniff and obtain sensitive information that can be later used to gain unauthorized access.

Jenkins Quality Gates Plugin 2.5 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Email Extension Plugin 2.72 and 2.73 transmits and displays the SMTP password in plain text as part of the global Jenkins configuration form, potentially resulting in its exposure.

Jenkins OpenShift Deployer Plugin 1.2.0 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

A user running a quick search on a highly forwarded message on WhatsApp for Android from v2.20.108 to v2.20.140 or WhatsApp Business for Android from v2.20.35 to v2.20.49 could have been sent to the Google service over plain HTTP.

Jenkins Sonar Quality Gates Plugin 1.3.1 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Repository Connector Plugin 1.2.6 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Login Page) of the vulnerable targeted system.

This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Password Reset Page) of the vulnerable targeted system.

journalpump is a daemon that takes log messages from journald and pumps them to a given output. A logging vulnerability was found in journalpump which logs out the configuration of a service integration in plaintext to the supplied logging pipeline, including credential information contained in the configuration if any. The problem has been patched in journalpump 2.5.0.

IBM PowerSC 1.3, 2.0, and 2.1 MFA does not implement the "HTTP Strict Transport Security" (HSTS) web security policy mechanism. IBM X-Force ID: 276004.

D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Transmission of Sensitive Information.

The embedded web interface of the device does not support HTTPS/TLS for authentication and uses HTTP Basic Authentication. Traffic is encoded but not encrypted, exposing user credentials to passive interception by attackers on the same network.

An information disclosure vulnerability exists in Visual Studio Code Live Share Extension when it exposes tokens in plain text, aka 'Visual Studio Code Live Share Information Disclosure Vulnerability'.

SolarWinds Serv-U is submitting an HTTP request when changing or updating the attributes for File Share or File request.  Part of the URL of the request discloses sensitive data. 

If Thunderbird is configured to use STARTTLS for an IMAP server, and the server sends a PREAUTH response, then Thunderbird will continue with an unencrypted connection, causing email data to be sent without protection. This vulnerability affects Thunderbird < 68.9.0.

A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow attacker to information disclosure via <insert attack vector here>

In JetBrains GoLand before 2019.3.2, the plugin repository was accessed via HTTP instead of HTTPS.

An issue was discovered in Castle Rock SNMPc Online 12.10.10 before 2020-01-28. It includes the username and password values in cleartext within each request's cookie value.

Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.

Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems use cleartext messages to communicate order information with an order entry system. This could allow an attacker with network access to view sensitive data including PHI.

Sigma Spectrum Infusion System v's6.x (model 35700BAX) and Baxter Spectrum Infusion System Version(s) 8.x (model 35700BAX2) at the application layer uses an unauthenticated clear-text communication channel to send and receive system status and operational data. This could allow an attacker that has circumvented network security measures to view sensitive non-private data or to perform a man-in-the-middle attack.

A vulnerability is in the 'BSW_cxttongr.htm' page of the Netgear DGN2200, version DGN2200-V1.0.0.50_7.0.50, and DGND3700, version DGND3700-V1.0.0.17_1.0.17, which can allow a remote attacker to access this page without any authentication. When processed, it exposes the admin password in clear text before it gets redirected to absw_vfysucc.cgia. An attacker can use this password to gain administrator access to the targeted router's web interface.

An issue discovereed in EBYTE E880-IR01-V1.1 allows an attacker to obtain sensitive information via crafted POST request to /cgi-bin/luci.

There are few web pages associated with the genie app on the Netgear WNDR4500 running firmware version V1.0.1.40_1.0.6877. Genie app adds some capabilities over the Web GUI and can be accessed even when you are away from home. A remote attacker can access genie_ping.htm or genie_ping2.htm or genie_ping3.htm page without authentication. Once accessed, the page will be redirected to the aCongratulations2.htma page, which reveals some sensitive information such as 2.4GHz & 5GHz Wireless Network Name (SSID) and Network Key (Password) in clear text.

Cleartext Transmission of Sensitive Information vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series CPU module allows a remote unauthenticated attacker to obtain credential information by intercepting SLMP communication messages, and read or write the device values of the product and stop the operations of programs by using the obtained credential information.

An issue pertaining to CWE-319: Cleartext Transmission of Sensitive Information was discovered in Nexusoft NexusInterface v3.2.0-beta.2.

CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.

Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 passwords are sent as plaintext during unlocking and project transfers. An attacker who has network visibility can observe the password exchange.

Moxa IKS-G6824A series Versions 4.5 and prior, EDS-405A series Version 3.8 and prior, EDS-408A series Version 3.8 and prior, and EDS-510A series Version 3.8 and prior use plaintext transmission of sensitive data, which may allow an attacker to capture sensitive data such as an administrative password.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon Premium , Modicon Quantum (all firmware versions), which could cause the disclosure of information when transferring applications to the controller using Modbus TCP protocol.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.

Oncommand Insight versions prior to 7.3.5 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

A cleartext transmission of sensitive information vulnerability is present in Hickory Smart Ethernet Bridge from Belwith Products, LLC. Captured data reveals that the Hickory Smart Ethernet Bridge device communicates over the network to an MQTT broker without using encryption. This exposed the default username and password used to authenticate to the MQTT broker. This issue affects Hickory Smart Ethernet Bridge, model number H077646. The firmware does not appear to contain versioning information.

OnCommand Unified Manager 7-Mode prior to version 5.2.4 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

OnCommand Workflow Automation versions prior to 5.0 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.

ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can access the server's configuration file by sending an HTTP GET request. Amongst the configuration data, the attacker may gain access to valid admin usernames and, in older versions of ELOG, passwords.