Kylin's cube designer function has a command injection vulnerability when overwriting system parameters in the configuration overwrites menu. RCE can be implemented by closing the single quotation marks around the parameter value of “-- conf=” to inject any operating system command into the command line parameters. This vulnerability affects Kylin 2 version 2.6.5 and earlier, Kylin 3 version 3.1.2 and earlier, and Kylin 4 version 4.0.1 and earlier.

This affects all versions of package portkiller. If (attacker-controlled) user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "capture_packages" operation.

This affects all versions of package killing. If attacker-controlled user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

This affects all versions of package ps-kill. If (attacker-controlled) user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization in the index.js file. PoC (provided by reporter): var ps_kill = require('ps-kill'); ps_kill.kill('$(touch success)',function(){});

A CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause remote code execution when performed over the network. Affected Product: StruxureWare Data Center Expert (V7.8.1 and prior)

This affects all versions of package psnode. If attacker-controlled user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.

processCommandUpgrade() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.1.9.2954 build 20241120 and later QTS 5.2.2.2950 build 20241114 and later QuTS hero h5.1.9.2954 build 20241120 and later QuTS hero h5.2.2.2952 build 20241116 and later

An OS command injection vulnerability in the discover_and_manage CGI script in NETSAS Enigma NMS 65.0.0 and prior allows an attacker to execute arbitrary code because of improper neutralization of shell metacharacters in the ip_address variable within an snmp_browser action.

The processCommandSetMac() function of libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to ajaxServerSettingsChk.php because the rootUname parameter is passed to the exec function without filtering, which can lead to command execution.

Remote Code execution vulnerability in Micro Focus Operation Bridge Reporter (OBR) product, affecting version 10.40. The vulnerability could be exploited to allow Remote Code Execution on the OBR server.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold.  The Apm.UI.Areas.APM.Controllers.CommunityController allows execution of commands with iisapppool\nmconsole privileges.

An OS command injection vulnerability has been reported to affect several product versions. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.3.103 and later

An issue was found on the Ruijie EG-2000 series gateway. There is a newcli.php API interface without access control, which can allow an attacker (who only has web interface access) to use TELNET commands and/or show admin passwords via the mode_url=exec&command= substring. This affects EG-2000SE EG_RGOS 11.9 B11P1.

The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

All versions of package git are vulnerable to Remote Code Execution (RCE) due to missing sanitization in the Git.git method, which allows execution of OS commands rather than just git commands. Steps to Reproduce 1. Create a file named exploit.js with the following content: js var Git = require("git").Git; var repo = new Git("repo-test"); var user_input = "version; date"; repo.git(user_input, function(err, result) { console.log(result); }) 2. In the same directory as exploit.js, run npm install git. 3. Run exploit.js: node exploit.js. You should see the outputs of both the git version and date command-lines. Note that the repo-test Git repository does not need to be present to make this PoC work.

Tiki Wiki CMS – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

An issue was discovered in Webmin <=1.920. The parameter old in password_change.cgi contains a command injection vulnerability.

This affects all versions of package ps-visitor. If attacker-controlled user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the password can be specified, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. An unauthenticated remote OS Command Injection vulnerability allows an attacker to execute arbitrary commands on the RTU due to the passing of unsafe user supplied data to the RTU's system shell. Functionality in mobile.php provides users with the ability to ping sites or IP addresses via Mobile Connection Test. When the Mobile Connection Test is submitted, action.php is called to execute the test. An attacker can use a shell command separator (;) in the host variable to execute operating system commands upon submitting the test data.

A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240506. Affected is an unknown function of the file /view/networkConfig/physicalInterface/interface_commit.php. The manipulation of the argument name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. VDB-263934 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC up to 20240506. This affects an unknown part of the file /view/networkConfig/GRE/gre_add_commit.php. The manipulation of the argument name/remote/local/IP leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263937 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

A Code Injection exists in treekill on Windows which allows a remote code execution when an attacker is able to control the input into the command.

TRENDnet TV-IP410 vA1.0R was discovered to contain an OS command injection vulnerability via the /server/cgi-bin/testserv.cgi component.

An issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. An attacker can exploit OS Command Injection in the filename parameter for remote code execution as root. This occurs in the Mainproc executable file, which can be run from the HTTPD web server.

cgi-cpn/xcoding/prontus_videocut.cgi in AltaVoz Prontus (aka ProntusCMS) through 12.0.3.0 has "Improper Neutralization of Special Elements used in an OS Command," allowing attackers to execute OS commands via an HTTP GET parameter.

An issue was discovered on Zolo Halo devices via the Linkplay firmware. There is Zolo Halo LAN remote code execution. The Zolo Halo Bluetooth speaker had a GoAhead web server listening on the port 80. The /httpapi.asp endpoint of the GoAhead web server was also vulnerable to multiple command execution vulnerabilities.

The Data Protection extension in the VMware GUI in IBM Tivoli Storage Manager for Virtual Environments: Data Protection for VMware (aka Spectrum Protect for Virtual Environments) 7.1 before 7.1.3.0 and Tivoli Storage FlashCopy Manager for VMware (aka Spectrum Protect Snapshot) 4.1 before 4.1.3.0 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

This affects all versions of package wincred. If attacker-controlled user input is given to the getCredential function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, when using Apache and PHP-CGI on Windows, if the system is set up to use certain code pages, Windows may use "Best-Fit" behavior to replace characters in command line given to Win32 API functions. PHP CGI module may misinterpret those characters as PHP options, which may allow a malicious user to pass options to PHP binary being run, and thus reveal the source code of scripts, run arbitrary PHP code on the server, etc.

This affects all versions of package ffmpegdotjs. If attacker-controlled user input is given to the trimvideo function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow triggerPort OS Command Injection (issue 5 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow serviceName OS Command Injection (issue 4 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow portMappingProtocol OS Command Injection (issue 3 of 5).

The postjournal service in Zimbra Collaboration (ZCS) before 8.8.15 Patch 46, 9 before 9.0.0 Patch 41, 10 before 10.0.9, and 10.1 before 10.1.1 sometimes allows unauthenticated users to execute commands.

An issue was discovered in Microvirt MEmu all versions prior to 7.0.2. A guest Android operating system inside the MEmu emulator contains a /system/bin/systemd binary that is run with root privileges on startup (this is unrelated to Red Hat's systemd init program, and is a closed-source proprietary tool that seems to be developed by Microvirt). This program opens TCP port 21509, presumably to receive installation-related commands from the host OS. Because everything after the installer:uninstall command is concatenated directly into a system() call, it is possible to execute arbitrary commands by supplying shell metacharacters.

An issue was discovered in DTS Monitoring 3.57.0. The parameter url within the WGET check function is vulnerable to OS command injection (blind).

Elsight – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5).