GigaVUE-OS (GVOS) 5.4 - 5.9 stores a Redis database password in plaintext.

A vulnerability in Veeam Backup & Replication allows low-privileged users to leak all saved credentials in plaintext. This is achieved by calling a series of methods over an external protocol, ultimately retrieving the credentials using a malicious setup on the attacker's side. This exposes sensitive data, which could be used for further attacks, including unauthorized access to systems managed by the platform.

Cleartext storage of sensitive information exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote authenticated attacker to obtain an APN credential for the product.

Jenkins view-cloner Plugin 1.1 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

Nextcloud mail is an email app for the nextcloud home server platform. In versions prior to 2.2.2 user's passwords were stored in cleartext in the database during the duration of OAuth2 setup procedure. Any attacker or malicious user with access to the database would have access to these user passwords until the OAuth setup has been completed. It is recommended that the Nextcloud Mail app is upgraded to 2.2.2. There are no known workarounds for this issue.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

Jenkins Copr Plugin 0.3 and earlier stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Information disclosure vulnerability exists in Pgpool-II 4.4.0 to 4.4.1 (4.4 series), 4.3.0 to 4.3.4 (4.3 series), 4.2.0 to 4.2.11 (4.2 series), 4.1.0 to 4.1.14 (4.1 series), 4.0.0 to 4.0.21 (4.0 series), All versions of 3.7 series, All versions of 3.6 series, All versions of 3.5 series, All versions of 3.4 series, and All versions of 3.3 series. A specific database user's authentication information may be obtained by another database user. As a result, the information stored in the database may be altered and/or database may be suspended by a remote attacker who successfully logged in the product with the obtained credentials.

A vulnerability was found in Xunrui CMS 4.61 and classified as problematic. Affected by this issue is some unknown functionality of the file /dayrui/Fcms/View/system_log.html. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-224240.

A vulnerability in the logging component of Cisco Duo Authentication Proxy could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability exists because certain unencrypted credentials are stored. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to view sensitive information in clear text.

In Airflow versions prior to 1.10.13, when creating a user using airflow CLI, the password gets logged in plain text in the Log table in Airflow Metadatase. Same happened when creating a Connection with a password field.

The fix in 4.6.16, 4.7.9, 4.8.4 and 4.9.7 for CVE-2018-10919 Confidential attribute disclosure vi LDAP filters was insufficient and an attacker may be able to obtain confidential BitLocker recovery keys from a Samba AD DC.

An issue was discovered in Italtel Embrace 1.6.4. The web application inserts cleartext passwords in the HTML source code. An authenticated user is able to edit the configuration of the email server. Once the user access the edit function, the web application fills the edit form with the current credentials for the email account, including the cleartext password.

A cleartext storage of sensitive information in GUI in FortiADC versions 5.4.3 and below, 6.0.0 and below may allow a remote authenticated attacker to retrieve some sensitive information such as users LDAP passwords and RADIUS shared secret by deobfuscating the passwords entry fields.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the Brocade SANnav password in clear text in supportsave logs when a user schedules a switch Supportsave from Brocade SANnav.

On Xerox WorkCentre 3550 25.003.03.000 devices, an authenticated attacker can view the SMB server settings and can obtain the stored cleartext credentials associated with those settings.

A vulnerability in the implementation of the Cisco Network Plug-and-Play (PnP) agent of Cisco DNA Center could allow an authenticated, remote attacker to view sensitive information in clear text. The attacker must have valid low-privileged user credentials. This vulnerability is due to improper role-based access control (RBAC) with the integration of PnP. An attacker could exploit this vulnerability by authenticating to the device and sending a query to an internal API. A successful exploit could allow the attacker to view sensitive information in clear text, which could include configuration files.

Nextcloud Server is the file server software for Nextcloud, a self-hosted productivity platform. In Nextcloud Server prior to versions 23.0.9 and 24.0.5 and Nextcloud Enterprise Server prior to versions 22.2.10.5, 23.0.9, and 24.0.5 an attacker reading `nextcloud.log` may gain knowledge of credentials to connect to a SharePoint service. Nextcloud Server versions 23.0.9 and 24.0.5 and Nextcloud Enterprise Server versions 22.2.10.5, 23.0.9, and 24.0.5 contain a patch for this issue. As a workaround, set `zend.exception_ignore_args = On` as an option in `php.ini`.

SnapCenter versions prior to 5.0p1 are susceptible to a vulnerability which could allow an authenticated attacker to discover plaintext credentials.

"IBM Cognos Analytics 11.2.1, 11.2.0, 11.1.7 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 229963."

389-ds-base before versions 1.3.8.5, 1.4.0.12 is vulnerable to a Cleartext Storage of Sensitive Information. By default, when the Replica and/or retroChangeLog plugins are enabled, 389-ds-base stores passwords in plaintext format in their respective changelog files. An attacker with sufficiently high privileges, such as root or Directory Manager, can query these files in order to retrieve plaintext passwords.

An issue was discovered in PrimeKey EJBCA before 7.6.0. When audit logging changes to the alias configurations of various protocols that use an enrollment secret, any modifications to the secret were logged in cleartext in the audit log (that can only be viewed by an administrator). This affects use of any of the following protocols: SCEP, CMP, or EST.

IBM Security Risk Manager on CP4S 1.7.0.0 stores user credentials in plain clear text which can be read by a an authenticatedl privileged user. IBM X-Force ID: 209940.

IBM Data Risk Manager 2.0.6 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 209947.

Cleartext Storage of Sensitive Information in Memory vulnerability in Mitsubishi Electric Corporation GX Works3 versions 1.015R and later, GX Works2 all versions and GX Developer versions 8.40S and later allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users could obtain information about the project file for MELSEC safety CPU modules or project file for MELSEC Q/FX/L series with security setting.

Generated Support Bundles contains private S/MIME and PGP keys if containing folder is not hidden. This issue affects: OTRS AG ((OTRS)) Community Edition 6.0.x version 6.0.1 and later versions. OTRS AG OTRS 7.0.x version 7.0.28 and prior versions; 8.0.x version 8.0.15 and prior versions.

A cleartext storage of information vulnerability in the Zyxel VMG3625-T50B firmware version V5.50(ABTL.0)b2k could allow an authenticated attacker to obtain sensitive information from the configuration file.

An internal product security audit of Lenovo XClarity Controller (XCC) discovered that the XCC configuration backup/restore password may be written to an internal XCC log buffer if Lenovo XClarity Administrator (LXCA) is used to perform the backup/restore. The backup/restore password typically exists in this internal log buffer for less than 10 minutes before being overwritten. Generating an FFDC service log will include the log buffer contents, including the backup/restore password if present. The FFDC service log is only generated when requested by a privileged XCC user and it is only accessible to the privileged XCC user that requested the file. The backup/restore password is not captured if the backup/restore is initiated directly from XCC.

Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue.

The Portal Workflow module in Liferay Portal 7.3.2 and earlier, and Liferay DXP 7.0 before fix pack 93, 7.1 before fix pack 19, and 7.2 before fix pack 7, user's clear text passwords are stored in the database if workflow is enabled for user creation, which allows attackers with access to the database to obtain a user's password.

KDE Messagelib through 5.17.0 reveals cleartext of encrypted messages in some situations. Deleting an attachment of a decrypted encrypted message stored on a remote server (e.g., an IMAP server) causes KMail to upload the decrypted content of the message to the remote server. With a crafted message, a user could be tricked into decrypting an encrypted message and then deleting an attachment attached to this message. If the attacker has access to the messages stored on the email server, then the attacker could read the decrypted content of the encrypted message. This occurs in ViewerPrivate::deleteAttachment in messageviewer/src/viewer/viewer_p.cpp.

The App Settings (/admin/app) page in GROWI versions prior to v6.0.6 stores sensitive information in cleartext form. As a result, the Secret access key for external service may be obtained by an attacker who can access the App Settings page.

IBM Security Identity Manager 7.0.2 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 199998.

IBM Jazz Team Server products stores user credentials in clear text which can be read by an authenticated user. IBM X-Force ID: 203172.

CodeIgniter Shield is an authentication and authorization provider for CodeIgniter 4. The `secretKey` value is an important key for HMAC SHA256 authentication and in affected versions was stored in the database in cleartext form. If a malicious person somehow had access to the data in the database, they could use the key and secretKey for HMAC SHA256 authentication to send requests impersonating that corresponding user. This issue has been addressed in version 1.0.0-beta.8. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The Nautobot Device Onboarding plugin uses the netmiko and NAPALM libraries to simplify the onboarding process of a new device into Nautobot down to, in many cases, an IP Address and a Location. Starting in version 2.0.0 and prior to version 3.0.0, credentials provided to onboarding task are visible via Job Results from an execution of an Onboarding Task. Version 3.0.0 fixes this issue; no known workarounds are available. Mitigation recommendations include deleting all Job Results for any onboarding task to remove clear text credentials from database entries that were run while on v2.0.X, upgrading to v3.0.0, and rotating any exposed credentials.

An issue was discovered in Solar-Log 500 before 2.8.2 Build 52 23.04.2013. In /export.html, email.html, and sms.html, cleartext passwords are stored. This may allow sensitive information to be read by someone with access to the device. Fixed with 3.0.0-60 11.10.2013 for SL 200, 500, 1000 / not existing for SL 250, 300, 1200, 2000, SL 50 Gateway, SL Base.

Jenkins lambdatest-automation Plugin 1.20.10 and earlier logs LAMBDATEST Credentials access token at the INFO level, potentially resulting in its exposure.

A cleartext storage of sensitive information vulnerability in the Zyxel NBG6604 firmware could allow a remote, authenticated attacker to obtain sensitive information from the configuration file.

TP-Link Archer C5v 1.7_181221 devices allows remote attackers to retrieve cleartext credentials via [USER_CFG#0,0,0,0,0,0#0,0,0,0,0,0]0,0 to the /cgi?1&5 URI.

An issue was discovered in Mutare Voice (EVM) 3.x before 3.3.8. On the admin portal of the web application, password information for external systems is visible in cleartext. The Settings.asp page is affected by this issue.

Headwind MDM Web panel 5.22.1 is vulnerable to Incorrect Access Control due to Login Credential Leakage via Audit Entries.

A flaw was found in ovirt-engine, which leads to the logging of plaintext passwords in the log file when using otapi-style. This flaw allows an attacker with sufficient privileges to read the log file, leading to confidentiality loss.

The Momo application 2.1.9 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user and a user's access token via Logcat.

The Send Anywhere application 9.4.18 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user via /data/data/com.estmob.android.sendanywhere/shared_prefs/sendanywhere_device.xml.

Cloudera Manager 5.x before 5.7.1 places Sensitive Data in cleartext Readable Files.

A vulnerability identified in storing and reusing information in Advance Authentication. This issue can lead to leakage of sensitive data to unauthorized user. The issue affects NetIQ Advance Authentication before 6.3.5.1

An issue has been discovered in GitLab affecting all versions starting from 11.6. Pull mirror credentials are exposed that allows other maintainers to be able to view the credentials in plain-text,

Jenkins SOASTA CloudTest Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins iceScrum Plugin 1.1.4 and earlier stored credentials unencrypted in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.