A vulnerability in OPTILINK OP-XT71000N Hardware Version: V2.2, Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross site request forgery (CSRF) attack to enable syslog mode through ' /mgm_log_cfg.asp.' The system starts to log events, 'Remote' mode or 'Both' mode on "Syslog -- Configuration page" logs events and sends to remote syslog server IP and Port.

A vulnerability in the "/admin/wlmultipleap.asp" of optilink OP-XT71000N version: V2.2 could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to create Multiple WLAN BSSID.

A vulnerability in OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to cause a Denial of Service by Rebooting the router through " /mgm_dev_reboot.asp."

A vulnerability in OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to Reset ONU to Factory Default through ' /mgm_dev_reset.asp.' Resetting to default leads to Escalation of Privileges by logging-in with default credentials.

A vulnerability found in the OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to men in the middle attack by adding New Routes in RoutingConfiguration on " /routing.asp ".

A vulnerability found in OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to Add Network Traffic Control Type Rule.

A remote attacker can conduct a cross-site request forgery (CSRF) attack on OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028. The vulnerability is due to insufficient CSRF protections for the "mgm_config_file.asp" because of which attacker can create a crafted "csrf form" which sends " malicious xml data" to "/boaform/admin/formMgmConfigUpload". the exploit allows attacker to "gain full privileges" and to "fully compromise of router & network".

A vulnerability in OPTILINK OP-XT71000N Hardware Version: V2.2 , Firmware Version: OP_V3.3.1-191028 allows an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to "Enable or Disable Ports" and to "Change port number" through " /rmtacc.asp ".

Arunna 1.0.0 contains a cross-site request forgery vulnerability that allows attackers to manipulate user profile settings without authentication. Attackers can craft a malicious form to change user details, including passwords, email, and administrative privileges by tricking authenticated users into submitting the form.

A vulnerability was found in ghostxbh uzy-ssm-mall 1.0.0. It has been classified as problematic. Affected is an unknown function. The manipulation leads to cross-site request forgery. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) did not implement any mechanism to avoid CSRF attacks. Successful exploitation of this vulnerability can lead to the takeover of a local account on the device.

A Cross-Site Request Forgery (CSRF) in RequirementsBypassPage.php of Scratch Wiki scratch-confirmaccount-v3 allows attackers to modify account request requirement bypasses.

mysiteforme, as of 19-12-2022, has a CSRF vulnerability in the background blog management. The attacker constructs a CSRF load. Once the administrator clicks a malicious link, a blog tag will be added

Affected versions of Atlassian Jira Server and Data Center allow remote attackers to modify several resources (including CsvFieldMappingsPage.jspa and ImporterValueMappingsPage.jspa) via a Cross-Site Request Forgery (CSRF) vulnerability in the jira-importers-plugin. The affected versions are before version 8.13.15, and from version 8.14.0 before 8.20.3.

Apache Airflow, version 2.7.0 through 2.7.3, has a vulnerability that allows an attacker to trigger a DAG in a GET request without CSRF validation. As a result, it was possible for a malicious website opened in the same browser - by the user who also had Airflow UI opened - to trigger the execution of DAGs without the user's consent. Users are advised to upgrade to version 2.8.0 or later which is not affected

A Cross-Site Request Forgery (CSRF) in the /usapi?method=add-user component of Magewell Pro Convert v1.2.213 allows attackers to arbitrarily create accounts via a crafted GET request.

The WP Statistics plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 13.1.1. This is due to missing or incorrect nonce validation on the view() function. This makes it possible for unauthenticated attackers to activate and deactivate arbitrary plugins, via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

An issus was discovered in xiaohuanxiong CMS 5.0.17. There is a CSRF vulnerability that can modify administrator account's password.

showdoc is vulnerable to Cross-Site Request Forgery (CSRF)

Cross-Site Request Forgery (CSRF) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via any CGI endpoint. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

mm-wiki v0.2.1 was discovered to contain a Cross-Site Request Forgery (CSRF) which allows attackers to arbitrarily add user accounts and modify user information.

Multiple cross-site request forgery (CSRF) vulnerabilities in (1) addaddress.php, (2) toggleignore.php, (3) removeignore.php, and (4) removeaddress.php in Infopop UBB.Threads before 6.5.2 Beta allow remote attackers to modify settings as another user via a link or IMG tag.

firefly-iii is vulnerable to Cross-Site Request Forgery (CSRF)

FUEL CMS 1.5.0 login.php contains a cross-site request forgery (CSRF) vulnerability

The Content Copy Protection & Prevent Image Save WordPress plugin through 1.3 does not check for CSRF when saving its settings, not perform any validation and sanitisation on them, allowing attackers to make a logged in administrator set arbitrary XSS payloads in them.

Cross-Site Request Forgery (CSRF) vulnerability in Mark Tilly MyCurator Content Curation plugin <= 3.74 versions.

Cross-Site Request Forgery (CSRF) vulnerability in NXLog Manager 5.6.5633 version. This vulnerability allows an attacker to manipulate and delete user accounts within the platform by sending a specifically crafted query to the server. The vulnerability is based on the lack of proper validation of the origin of incoming requests.

Cross Site Request Forgery vulnerability in Micro Focus Application Performance Management product, affecting versions 9.40, 9.50 and 9.51. The vulnerability could be exploited by attacker to trick the users into executing actions of the attacker's choosing.

Cross-Site Request Forgery (CSRF) vulnerability in NXLog Manager 5.6.5633 version. This vulnerability allows an attacker to eliminate roles within the platform by sending a specifically crafted query to the server. The vulnerability is based on the absence of proper validation of the origin of incoming requests.

A cross-site request forgery (CSRF) vulnerability in Jenkins requests-plugin Plugin 2.2.12 and earlier allows attackers to create requests and/or have administrators apply pending requests.

CSRF in admin/edit-category.php in Chadha PHPKB Standard Multi-Language 9 allows attackers to edit a category, given the id, via a crafted request.

Cross-site request forgery (CSRF) vulnerability in EC-CUBE 2 series 2.11.0 to 2.17.1 allows a remote attacker to hijack the authentication of Administrator and delete Administrator via a specially crafted web page.

Form block is a wordpress plugin designed to make form creation easier. Versions prior to 1.0.2 are subject to a Cross-Site Request Forgery due to a missing nonce check. There is potential for a Cross Site Request Forgery for all form blocks, since it allows to send requests to the forms from any website without a user noticing. Users are advised to upgrade to version 1.0.2. There are no known workarounds for this vulnerability.

Easyndexer 1.0 contains a cross-site request forgery vulnerability that allows unauthenticated attackers to create administrative accounts by submitting forged POST requests. Attackers can craft malicious web pages that submit POST requests to createuser.php with parameters including username, password, name, surname, and privileges set to 1 for administrator access.

A Cross-Site Request Forgery (CSRF) vulnerability in the Schweitzer Engineering Laboratories SEL-5037 SEL Grid Configurator could allow an attacker to embed instructions that could be executed by an authorized device operator. See Instruction Manual Appendix A and Appendix E dated 20230615 for more details. This issue affects SEL-5037 SEL Grid Configurator: before 4.5.0.20.

showdoc is vulnerable to Cross-Site Request Forgery (CSRF)

TYPO3 is a free and open source Content Management Framework. A vulnerability has been identified in the backend user interface functionality involving deep links. Specifically, this functionality is susceptible to Cross-Site Request Forgery (CSRF). Additionally, state-changing actions in downstream components incorrectly accepted submissions via HTTP GET and did not enforce the appropriate HTTP method. Successful exploitation of this vulnerability requires the victim to have an active session on the backend user interface and to be deceived into interacting with a malicious URL targeting the backend, which can occur under the following conditions: The user opens a malicious link, such as one sent via email. The user visits a compromised or manipulated website while the following settings are misconfigured: 1. `security.backend.enforceReferrer` feature is disabled, 2. `BE/cookieSameSite` configuration is set to `lax` or `none`. The vulnerability in the affected downstream component “DB Check Module” allows attackers to manipulate data through unauthorized actions. Users are advised to update to TYPO3 versions 11.5.42 ELTS which fixes the problem described. There are no known workarounds for this issue.

IBM DB2 Recovery Expert for LUW 5.5 Interim Fix 002 IBM Db2 Recovery Expert for Linux, UNIX and Windows is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts.

The ARMember plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 4.0.5. This is due to missing or incorrect nonce validation on the arm_check_user_cap function. This makes it possible for unauthenticated attackers to perform multiple unauthorized actions via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

Cross-Site Request Forgery (CSRF) vulnerability discovered in Contact Form 7 Database Addon – CFDB7 WordPress plugin (versions <= 1.2.5.9).

Microhard Systems IPn4G 1.1.0 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without user consent. Attackers can craft malicious web pages to change admin passwords, add new users, and modify system settings by tricking authenticated users into loading a specially crafted page.

The WP EasyCart plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 5.4.8. This is due to missing or incorrect nonce validation on the process_delete_product function. This makes it possible for unauthenticated attackers to delete products via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

Cross-Site Request Forgery (CSRF) vulnerability in Yoast Yoast Local Premium.This issue affects Yoast Local Premium: from n/a through 14.8.

The vulnerability have been reported to affect earlier versions of Helpdesk. If exploited, this cross-site request forgery (CSRF) vulnerability could allow attackers to force NAS users to execute unintentional actions through a web application. QNAP has already fixed the issue in Helpdesk 3.0.3 and later.

SOPlanning 1.45 is vulnerable to a CSRF attack that allows for arbitrary changing of the admin password via process/xajax_server.php.

The WP EasyCart plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 5.4.8. This is due to missing or incorrect nonce validation on the process_bulk_delete_product function. This makes it possible for unauthenticated attackers to bulk delete products via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

School Management Software PHP/mySQL through 2019-03-14 allows office_admin/?action=addadmin CSRF to add an administrative user.

A Cross-Site Request Forgery (CSRF) in Online Food Ordering System v1.0 allows attackers to change user details and credentials via a crafted POST request.

@fastify/csrf-protection is a plugin which helps protect Fastify servers against CSRF attacks. The CSRF protection enforced by the @fastify/csrf-protection library in combination with @fastify/cookie can be bypassed from network and same-site attackers under certain conditions. @fastify/csrf-protection supports an optional userInfo parameter that binds the CSRF token to the user. This parameter has been introduced to prevent cookie-tossing attacks as a fix for CVE-2021-29624. Whenever userInfo parameter is missing, or its value can be predicted for the target user account, network and same-site attackers can 1. fixate a _csrf cookie in the victim's browser, and 2. forge CSRF tokens that are valid for the victim's session. This allows attackers to bypass the CSRF protection mechanism. As a fix, @fastify/csrf-protection starting from version 6.3.0 (and v4.1.0) includes a server-defined secret hmacKey that cryptographically binds the CSRF token to the value of the _csrf cookie and the userInfo parameter, making tokens non-spoofable by attackers. This protection is effective as long as the userInfo parameter is unique for each user. This is patched in versions 6.3.0 and v4.1.0. Users are advised to upgrade. Users unable to upgrade may use a random, non-predictable userInfo parameter for each user as a mitigation.

A vulnerability has been found in huang-yk student-manage 1.0 and classified as problematic. This vulnerability affects unknown code. The manipulation leads to cross-site request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.