A privilege escalation vulnerability in Wowza Streaming Engine 4.8.0 and earlier allows any unprivileged Linux user to escalate privileges to root. The installer sets too relaxed permissions on /usr/local/WowzaStreamingEngine/bin/* core program files. By injecting a payload into one of those files, it will run with the same privileges as the Wowza server, root. For example, /usr/local/WowzaStreamingEngine/bin/tune.sh could be replaced with a Trojan horse. This issue was resolved in Wowza Streaming Engine 4.8.5.

An issue was discovered in Exynos Mobile Processor and Modem for Exynos Modem 5123, Exynos Modem 5300, Exynos 980, and Exynos 1080. Binding of a wrong resource can occur due to improper handling of parameters while binding a network interface.

Debian-edu-config all versions < 2.11.10, a set of configuration files used for Debian Edu, and debian-lan-config < 0.26, configured too permissive ACLs for the Kerberos admin server, which allowed password changes for other Kerberos user principals.

Wrong permissions in configuration file can lead to unauthorized permission in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9150, MDM9607, MDM9650, MSM8909W, MSM8996AU, QCS405, QCS605, SD 210/SD 212/SD 205, SD 615/16/SD 415, SD 636, SD 712 / SD 710 / SD 670, SD 820, SD 820A, SD 855, SDA660, SDM660, SDX20, SDX24

Local Privilege Escalation in AVG Internet Security v24 on Windows allows a local unprivileged user to escalate privileges to SYSTEM via COM-Hijacking.

Insecure inherited permissions in some Intel(R) oneMKL software before version 2022.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

Incorrect permission assignment for critical resource exists in CONPROSYS HMI System (CHS) versions prior to 3.5.3. ACL (Access Control List) is not appropriately set to the local folder where the affected product is installed, therefore a wide range of privileges is permitted to a user of the PC where the affected product is installed. As a result, the user may be able to destroy the system and/or execute a malicious program.

G DATA Total Security Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of G DATA Total Security. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of autostart tasks. The issue results from incorrect permissions set on folders. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-22629.

Dell ThinOS 10, versions prior to 2508_10.0127, contains an Incorrect Permission Assignment for Critical Resource vulnerability. A local low-privileged attacker could potentially exploit this vulnerability leading to Elevation of Privileges and Unauthorized Access.

The init script in the Gentoo app-admin/logstash-bin package before 5.5.3 and 5.6.x before 5.6.1 has "chown -R" calls for user-writable directory trees, which allows local users to gain privileges by leveraging access to a $LS_USER account for creation of a hard link.

In IXP EasyInstall 6.2.13723, there is Lateral Movement (using the Agent Service) against other users on a client system. An authenticated attacker can, by modifying %SYSTEMDRIVE%\IXP\SW\[PACKAGE_CODE]\EveryLogon.bat, achieve this movement and execute code in the context of other users.

shadow 4.8, in certain circumstances affecting at least Gentoo, Arch Linux, and Void Linux, allows local users to obtain root access because setuid programs are misconfigured. Specifically, this affects shadow 4.8 when compiled using --with-libpam but without explicitly passing --disable-account-tools-setuid, and without a PAM configuration suitable for use with setuid account management tools. This combination leads to account management tools (groupadd, groupdel, groupmod, useradd, userdel, usermod) that can easily be used by unprivileged local users to escalate privileges to root in multiple ways. This issue became much more relevant in approximately December 2019 when an unrelated bug was fixed (i.e., the chmod calls to suidusbins were fixed in the upstream Makefile which is now included in the release version 4.8).

In ServiceManager::add function in the hardware service manager, there is an insecure permissions check based on the PID of the caller. This could allow an app to add or replace a HAL service with its own service, gaining code execution in a privileged process.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9Android ID: A-121035042Upstream kernel

Insecure permissions in cwrapper_perl in Centreon Infrastructure Monitoring Software through 19.10 allow local attackers to gain privileges. (cwrapper_perl is a setuid executable allowing execution of Perl scripts with root privileges.)

An insecure modification vulnerability in the /etc/passwd file was found in all versions of OpenShift ServiceMesh (maistra) before 1.0.8 in the openshift/istio-kialia-rhel7-operator-container. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

An issue was discovered in Genomedics MilleGP5 5.9.2, allows remote attackers to execute arbitrary code and gain escalated privileges via modifying specific files.

NVIDIA GPU Display Driver R378 contains a vulnerability in the kernel mode layer handler where improper access control may lead to denial of service or possible escalation of privileges.

The standardrestorer binary in Arq 5.10 and earlier for Mac allows local users to write to arbitrary files and consequently gain root privileges via a crafted restore path.

TrustPort Antivirus before 2.8.0.2266 and PC Security before 2.0.0.1291 use weak permissions (Everyone: Full Control) for files under %PROGRAMFILES%, which allows local users to gain privileges by replacing executables with Trojan horse programs.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.4 could allow a local user to perform unauthorized actions due to insufficient permission settings. IBM X-Force ID: 244073.

GSTN_offline_tool in India Goods and Services Tax Network (GSTN) Offline Utility tool before 1.2 executes winstart-server.vbs from the "C:\GST Offline Tool" directory, which has insecure permissions. This allows local users to gain privileges by replacing winstart-server.vbs with arbitrary VBScript code. For example, a local user could create VBScript code for a TCP reverse shell, and use that later for Remote Command Execution.

Razer Synapse 2.20.15.1104 and earlier uses weak permissions for the Devices directory, which allows local users to gain privileges via a Trojan horse (1) RazerConfigNative.dll or (2) RazerConfigNativeLOC.dll file.

RoboDK versions 5.5.3 and prior contain an insecure permission assignment to critical directories vulnerability, which could allow a local user to escalate privileges and write files to the RoboDK process and achieve code execution.  

drbd8 allows local users to bypass intended restrictions for certain actions via netlink packets, similar to CVE-2009-3725.

A vulnerability in the privilege management functionality of all Cisco BroadWorks server types could allow an authenticated, local attacker to elevate privileges to root on an affected system. This vulnerability is due to incorrect implementation of user role permissions. An attacker could exploit this vulnerability by authenticating to the application as a user with the BWORKS or BWSUPERADMIN role and issuing crafted commands on an affected system. A successful exploit could allow the attacker to execute commands beyond the sphere of their intended access level, including initiating installs or running operating system commands with elevated permissions. There are workarounds that address this vulnerability.

The ruby_parser-legacy (aka legacy) gem 1.0.0 for Ruby allows local privilege escalation because of world-writable files. For example, if the brakeman gem (which has a legacy dependency) 4.5.0 through 4.7.0 is used, a local user can insert malicious code into the ruby_parser-legacy-1.0.0/lib/ruby_parser/legacy/ruby_parser.rb file.

IOCTL Handling in the kyrld.sys driver in Kyrol Internet Security 9.0.6.9 allows an attacker to achieve privilege escalation, denial-of-service, and code execution via usermode because 0x9C402401 using METHOD_NEITHER results in a read primitive.

In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an attacker could set incorrect directory permissions, which could result in local privilege escalation.

Insecure inherited permissions in Intel(R) PROSet/Wireless WiFi products before version 21.70 on Windows 10 may allow an authenticated user to potentially enable escalation of privilege via local access.

Scanguard through 2019-11-12 on Windows has Insecure Permissions for the installation directory, leading to privilege escalation via a Trojan horse executable file.

Max Secure Anti Virus Plus 19.0.4.020 has Insecure Permissions on the installation directory. Local attackers can replace a .exe or .dll file to achieve privilege escalation.

An elevation of privilege vulnerability exists in the way that the Windows Kernel handles objects in memory, aka 'Windows Kernel Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-0669, CVE-2020-0670, CVE-2020-0671, CVE-2020-0672.

Nitro Pro before 13.2 creates a debug.log file in the directory where a .pdf file is located, if the .pdf document was produced by an OCR operation on the JPEG output of a scanner. Reportedly, this can have a security risk if debug.log is later edited and then executed.

In Sage 300 ERP (formerly accpac) through 6.8.x, the installer configures the C:\Sage\Sage300\Runtime directory to be the first entry in the system-wide PATH environment variable. However, this directory is writable by unprivileged users because the Sage installer fails to set explicit permissions and therefore inherits weak permissions from the C:\ folder. Because entries in the system-wide PATH variable are included in the search order for DLLs, an attacker could perform DLL search-order hijacking to escalate their privileges to SYSTEM. Furthermore, if the Global Search or Web Screens functionality is enabled, then privilege escalation is possible via the GlobalSearchService and Sage.CNA.WindowsService services, again via DLL search-order hijacking because unprivileged users would have modify permissions on the application directory. Note that while older versions of the software default to installing in %PROGRAMFILES(X86)% (which would allow the Sage folder to inherit strong permissions, making the installation not vulnerable), the official Sage 300 installation guides for those versions recommend installing in C:\Sage, which would make the installation vulnerable.

Wowza Streaming Engine before 4.8.5 has Insecure Permissions which may allow a local attacker to escalate privileges in / usr / local / WowzaStreamingEngine / manager / bin / in the Linux version of the server by writing arbitrary commands in any file and execute them as root. This issue was resolved in Wowza Streaming Engine 4.8.5.

The g_file_copy function in glib 2.0 sets the permissions of a target file to the permissions of a symbolic link (777), which allows user-assisted local users to modify files of other users, as demonstrated by using Nautilus to modify the permissions of the user home directory.

Adobe Photoshop Elements 8.0 installs the Adobe Active File Monitor V8 service with an insecure security descriptor, which allows local users to (1) stop the service via the stop command, (2) execute arbitrary commands as SYSTEM by using the config command to modify the binPath variable, or (3) restart the service via the start command.

OpenBSD 6.6, in a non-default configuration where S/Key or YubiKey authentication is enabled, allows local users to become root by leveraging membership in the auth group. This occurs because root's file can be written to /etc/skey or /var/db/yubikey, and need not be owned by root.

A vulnerability has been identified in SIMATIC Energy Manager Basic (All versions < V7.3 Update 1), SIMATIC Energy Manager PRO (All versions < V7.3 Update 1). Affected applications improperly assign permissions to critical directories and files used by the application processes. This could allow a local unprivileged attacker to achieve code execution with ADMINISTRATOR or even NT AUTHORITY/SYSTEM privileges.

Insecure Permissions vulnerability in PDQ Smart Deploy V.3.0.2040 allows a local attacker to execute arbtirary code via the \HKLM\SYSTEM\Setup\SmartDeploy component

For VMware Horizon Client for Windows (5.x and prior before 5.3.0), VMware Remote Console for Windows (10.x before 11.0.0), VMware Workstation for Windows (15.x before 15.5.2) the folder containing configuration files for the VMware USB arbitration service was found to be writable by all users. A local user on the system where the software is installed may exploit this issue to run commands as any user.

IBM WebSphere MQ 8.0.0.0 through 8.0.0.9 and 9.0.0.0 through 9.1.1 could allow a local non privileged user to execute code as an administrator due to incorrect permissions set on MQ installation directories. IBM X-Force ID: 157190.

GPMAW 14, a bioinformatics software, has a critical vulnerability related to insecure file permissions in its installation directory. The directory is accessible with full read, write, and execute permissions for all users, allowing unprivileged users to manipulate files within the directory, including executable files like GPMAW3.exe, Fragment.exe, and the uninstaller GPsetup64_17028.exe. An attacker with user-level access can exploit this misconfiguration by replacing or modifying the uninstaller (GPsetup64_17028.exe) with a malicious version. While the application itself runs in the user's context, the uninstaller is typically executed with administrative privileges when an administrator attempts to uninstall the software. By exploiting this flaw, an attacker could gain administrative privileges and execute arbitrary code in the context of the admin, resulting in privilege escalation.

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 39900.

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 39900.

The Device Mapper multipathing driver (aka multipath-tools or device-mapper-multipath) 0.4.8, as used in SUSE openSUSE, SUSE Linux Enterprise Server (SLES), Fedora, and possibly other operating systems, uses world-writable permissions for the socket file (aka /var/run/multipathd.sock), which allows local users to send arbitrary commands to the multipath daemon.

Dell EMC XtremIO XMS versions prior to 6.3.0 contain an incorrect permission assignment vulnerability. A malicious local user with XtremIO xinstall privileges may exploit this vulnerability to gain root access.

An issue was discovered in Ricoh (including Savin and Lanier) Windows printer drivers prior to 2020 that allows attackers local privilege escalation. Affected drivers and versions are: PCL6 Driver for Universal Print - Version 4.0 or later PS Driver for Universal Print - Version 4.0 or later PC FAX Generic Driver - All versions Generic PCL5 Driver - All versions RPCS Driver - All versions PostScript3 Driver - All versions PCL6 (PCL XL) Driver - All versions RPCS Raster Driver - All version

A CWE-732: Incorrect Permission Assignment for Critical Resource vulnerability exists that could cause local privilege escalation when a local attacker modifies the webroot directory. Affected Products: APC Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GA), APC Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GA-01-22261), Schneider Electric Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GS), Schneider Electric Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GS-01-22261)

The Auto Local Logon feature in Check Point VPN-1 SecuRemote/SecureClient NGX R60 and R56 for Windows caches credentials under the Checkpoint\SecuRemote registry key, which has Everyone/Full Control permissions, which allows local users to gain privileges by reading and reusing the credentials.