Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

A Remote Command Execution (RCE) vulnerability exists in all series H/W revisions D-link DIR-810L, DIR-820L/LW, DIR-826L, DIR-830L, and DIR-836L routers via the DDNS function in ncc2 binary file. Note: DIR-810L, DIR-820L, DIR-830L, DIR-826L, DIR-836L, all hardware revisions, have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle and as such this issue will not be patched.

Synel SYnergy Fingerprint Terminals - CWE-78: 'OS Command Injection'

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

Git-it through 4.4.0 allows OS command injection at the Branches Aren't Just For Birds challenge step. During the verification process, it attempts to run the reflog command followed by the current branch name (which is not sanitized for execution).

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

naholyr github-todos 3.1.0 is vulnerable to command injection. The range argument for the _hook subcommand is concatenated without any validation, and is directly used by the exec function.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

TOTOlink EX1800T V9.1.0cu.2112_B20220316 was discovered to contain a remote command execution (RCE) vulnerability via the telnet_enabled parameter of the setTelnetCfg interface

TOTOlink A3700R v9.1.2u.5822_B20200513 was discovered to contain a remote command execution (RCE) vulnerability via the setTracerouteCfg function.

mySCADA myPRO: Versions 8.20.0 and prior has a vulnerable debug interface which includes a ping utility, which may allow an attacker to inject arbitrary operating system commands.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the firmware can be updated, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

An issue was discovered in ExecuteCommand() in AVEVA Edge (formerly InduSoft Web Studio) versions R2020 and prior that allows unauthenticated arbitrary commands to be executed.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceMac of the file global.so which can control deviceName to attack.

CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause remote code execution when manipulating internal methods through Java RMI interface.

A remote command execution (RCE) vulnerability was found in FeMiner wms V1.0 in /wms/src/system/datarec.php. The $_POST[r_name] is directly passed into the $mysqlstr and is executed by exec.

A vulnerability was found in Brave UX for-the-badge and classified as critical. Affected by this issue is some unknown functionality of the file .github/workflows/combine-prs.yml. The manipulation leads to os command injection. The name of the patch is 55b5a234c0fab935df5fb08365bc8fe9c37cf46b. It is recommended to apply a patch to fix this issue. VDB-216842 is the identifier assigned to this vulnerability.

TOTOLINK EX1800T 9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the apcliChannel parameter of the setWiFiExtenderConfig interface of the cstecgi.cgi.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setLanguageCfg of the file global.so which can control langType to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in the function setDiagnosisCfg of the file lib/cste_modules/system.so to control the ipDoamin.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceName of the file global.so which can control thedeviceName to attack.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection. This vulnerability is present in an internal script.This issue affects Envoy: from 4.x up to and including 8.x and is currently unpatched.

TOTOlink EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution via the cstecgi.cgi setOpModeCfg interface.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

TOTOLink A860R V4.1.2cu.5182_B20201027 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

In TOTOLINK X6000R_Firmware V9.4.0cu.852_B20230719, the shttpd file sub_417338 function obtains fields from the front-end, connects them through the snprintf function, and passes them to the CsteSystem function, resulting in a command execution vulnerability.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the web interface of the Zyxel NWA-1100-NH firmware could allow an attacker to execute arbitrary OS commands on the device.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->password variable, that has the value of the password parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Sangfor Operation and Maintenance Management System up to 3.0.8. This issue affects some unknown processing of the file /isomp-protocol/protocol/getHis of the component HTTP POST Request Handler. The manipulation of the argument sessionPath results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.8. The affected element is the function SessionController of the file /isomp-protocol/protocol/session. Such manipulation of the argument Hostname leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability has been reported to affect QNAP device, VioStor. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR FW 5.1.6 build 20211109 and later

FLIR Thermal Camera PT-Series firmware version 8.0.0.64 contains multiple unauthenticated remote command injection vulnerabilities in the controllerFlirSystem.php script. Attackers can execute arbitrary system commands as root by exploiting unsanitized POST parameters in the execFlirSystem() function through shell_exec() calls. Exploitation evidence was observed by the Shadowserver Foundation on 2026-01-06 (UTC).

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The HGiga OAKlouds mobile portal does not filter special characters of the Ethernet number parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

cgi-bin/drknow.cgi in Innotube ITGuard-Manager 0.0.0.1 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the username field, as demonstrated by a username beginning with "admin|" to use the '|' metacharacter.

The package cookiecutter before 2.1.1 are vulnerable to Command Injection via hg argument injection. When calling the cookiecutter function from Python code with the checkout parameter, it is passed to the hg checkout command in a way that additional flags can be set. The additional flags can be used to perform a command injection.

The HGiga OAKlouds mobile portal does not filter special characters of the IPv6 Gateway parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

TOTOLink A800R V4.1.2cu.5137_B20200730 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

Keijiban Tsumiki v1.15 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

# Vulnerability in `rand-quote` and `hitokoto` plugins **Description**: the `rand-quote` and `hitokoto` fetch quotes from quotationspage.com and hitokoto.cn respectively, do some process on them and then use `print -P` to print them. If these quotes contained the proper symbols, they could trigger command injection. Given that they're an external API, it's not possible to know if the quotes are safe to use. **Fixed in**: [72928432](https://github.com/ohmyzsh/ohmyzsh/commit/72928432). **Impacted areas**: - `rand-quote` plugin (`quote` function). - `hitokoto` plugin (`hitokoto` function).

Zoho ManageEngine ADManager Plus version 7110 and prior has a Post-Auth OS command injection vulnerability.

In ProLink PRC2402M V1.0.18 and older, the set_TR069 function in the adm.cgi binary, accessible with a page parameter value of TR069 contains a trivial command injection where the value of the TR069_local_port parameter is passed directly to system.