EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

A critical vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) products which can allow an unauthenticated attacker to inject commands that are run as a site user.

EnerSys AMPA 22.09 and prior versions are vulnerable to command injection leading to privileged remote shell access.

Actual Analyzer through 2014-08-29 allows code execution via shell metacharacters because untrusted input is used for part of the input data passed to an eval operation.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in Task Manager component in Synology BeePhotos before 1.0.2-10026 and 1.1.0-10053 and Synology Photos before 1.6.2-0720 and 1.7.0-0795 allows remote attackers to execute arbitrary code via unspecified vectors.

Arbitrary commands execution on the server by exploiting a command injection vulnerability in the LDAP authentication mechanism. This issue affects Pandora FMS: from 700 through <=777.4

A vulnerability has been found in Tenda AC6 15.03.05.19 and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac of the component API Endpoint. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Totolink X2000R 1.0.0-B20221212.1452. Affected by this vulnerability is the function formMapDelDevice of the file /boafrm/formMapDelDevice. The manipulation of the argument macstr leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

A vulnerability was found in kalcaddle kodbox up to 1.48. It has been declared as critical. Affected by this vulnerability is the function check of the file plugins/officeViewer/controller/libreOffice/index.class.php. The manipulation of the argument soffice leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.48.04 is able to address this issue. The identifier of the patch is 63a4d5708d210f119c24afd941d01a943e25334c. It is recommended to upgrade the affected component. The identifier VDB-248209 was assigned to this vulnerability.

Sharp NEC Displays ((UN462A R1.300 and prior to it, UN462VA R1.300 and prior to it, UN492S R1.300 and prior to it, UN492VS R1.300 and prior to it, UN552A R1.300 and prior to it, UN552S R1.300 and prior to it, UN552VS R1.300 and prior to it, UN552 R1.300 and prior to it, UN552V R1.300 and prior to it, UX552S R1.300 and prior to it, UX552 R1.300 and prior to it, V864Q R2.000 and prior to it, C861Q R2.000 and prior to it, P754Q R2.000 and prior to it, V754Q R2.000 and prior to it, C751Q R2.000 and prior to it, V984Q R2.000 and prior to it, C981Q R2.000 and prior to it, P654Q R2.000 and prior to it, V654Q R2.000 and prior to it, C651Q R2.000 and prior to it, V554Q R2.000 and prior to it, P404 R3.200 and prior to it, P484 R3.200 and prior to it, P554 R3.200 and prior to it, V404 R3.200 and prior to it, V484 R3.200 and prior to it, V554 R3.200 and prior to it, V404-T R3.200 and prior to it, V484-T R3.200 and prior to it, V554-T R3.200 and prior to it, C501 R2.000 and prior to it, C551 R2.000 and prior to it, C431 R2.000 and prior to it) allows an attacker a buffer overflow and to execute remote code by sending long parameters that contains specific characters in http request.

Wavlink WL-WN575A3 RPT75A3.V4300.201217 was discovered to contain a command injection vulnerability via the function obtw. This vulnerability allows attackers to execute arbitrary commands via a crafted POST request.

A vulnerability has been identified in SIMATIC CP 1242-7 V2 (All versions < V3.3.46), SIMATIC CP 1243-1 (All versions < V3.3.46), SIMATIC CP 1243-7 LTE EU (All versions < V3.3.46), SIMATIC CP 1243-7 LTE US (All versions < V3.3.46), SIMATIC CP 1243-8 IRC (All versions < V3.3.46), SIMATIC CP 1542SP-1 IRC (All versions >= V2.0 < V2.2.28), SIMATIC CP 1543-1 (All versions < V3.0.22), SIMATIC CP 1543SP-1 (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS NET CP 1242-7 V2 (All versions < V3.3.46), SIPLUS NET CP 1543-1 (All versions < V3.0.22), SIPLUS S7-1200 CP 1243-1 (All versions < V3.3.46), SIPLUS S7-1200 CP 1243-1 RAIL (All versions < V3.3.46). The application does not correctly escape some user provided fields during the authentication process. This could allow an attacker to inject custom commands and execute arbitrary code with elevated privileges.

Command injection vulnerability in /usr/www/res.php in FLIR AX8 up to 1.46.16 allows attackers to run arbitrary commands via the value parameter.

An issue discovered in sub_4117F8 function in TOTOLINK X6000R V9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the 'lang' parameter.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.

Tenda AX1803 v1.0.0.1 was discovered to contain a command injection vulnerability via the function fromAdvSetLanIp.

In Boa, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20220026; Issue ID: OSBNB00144124.

Green Packet WiMax DV-360 2.10.14-g1.0.6.1 devices allow Command Injection, with unauthenticated remote command execution, via a crafted payload to the HTTPS port, because lighttpd listens on all network interfaces (including the external Internet) by default. NOTE: this may overlap CVE-2017-9980.

TOTOLINK EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanSecDns parameter’ of the setLanConfig interface of the cstecgi .cgi

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). The affected application contains a file upload server that is vulnerable to command injection. An attacker could use this to achieve arbitrary code execution.

There is a command injection vulnerability in Huawei terminal printer product. Successful exploitation could result in the highest privileges of the printer. (Vulnerability ID: HWPSIRT-2022-51773) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2022-32203.

This affects all versions of package heroku-env. The injection point is located in lib/get.js which is required by index.js.

vRealize Network Insight (vRNI) contains a command injection vulnerability present in the vRNI REST API. A malicious actor with network access to the vRNI REST API can execute commands without authentication.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the sysScheduleRebootSet function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119.

TOTOLINK EX300_V2 V4.0.3c.7484 was discovered to contain a command injection vulnerability via the langType parameter in the setLanguageCfg function. This vulnerability is exploitable via a crafted MQTT data packet.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the pingCheck function.

An OS command injection vulnerability exists in the sysupgrade command injection functionality of Robustel R1510 3.1.16 and 3.3.0. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

tj-actions/changed-files is a Github action to retrieve all files and directories. Prior to 41.0.0, the `tj-actions/changed-files` workflow allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. This issue may lead to arbitrary command execution in the GitHub Runner. This vulnerability has been addressed in version 41.0.0. Users are advised to upgrade.

TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the setRebootScheCfg interface of the cstecgi .cgi.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A command injection security vulnerability has been identified in HPE Nimble Storage Hybrid Flash Arrays, HPE Nimble Storage All Flash Arrays and HPE Nimble Storage Secondary Flash Arrays that could allow an attacker to execute arbitrary commands on a Nimble appliance. HPE has made the following software updates to resolve the vulnerability in HPE Nimble Storage: 5.0.10.100 or later, 5.2.1.0 or later, 6.0.0.100 or later.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the pingSet function.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.6 build 20220401 and later

Roxy-WI is a Web interface for managing HAProxy, Nginx and Keepalived servers. Prior to version 6.1.1.0, the system command can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Version 6.1.1.0 contains a patch for this issue.

TOTOLink outdoor CPE CP900 V6.3c.566_B20171026 discovered to contain a command injection vulnerability in the setPasswordCfg function via the adminuser and adminpassparameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.