An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. A hardcoded RSA private key (specific to V1600D, V1600G1, and V1600G2) is contained in the firmware images.

An issue was discovered on V-SOL V1600D V2.03.69 OLT devices. The string K0LTdi@gnos312$ is compared to the password provided by the the remote attacker. If it matches, access is provided.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. An low-privileged (non-admin) attacker can use a hardcoded password (4ef9cea10b2362f15ba4558b1d5c081f) to create an admin user.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. There is an !j@l#y$z%x6x7q8c9z) password for the admin account to authenticate to the TELNET service.

A use of hard-coded credentials vulnerability [CWE-798] in FortiNAC-F version 7.2.0, FortiNAC version 9.4.2 and below, 9.2 all versions, 9.1 all versions, 8.8 all versions, 8.7 all versions may allow an authenticated attacker to access to the database via shell commands.

SonicWall Email Security Virtual Appliance version 10.0.9 and earlier versions contain a default username and a password that is used at initial setup. An attacker could exploit this transitional/temporary user account from the trusted domain to access the Virtual Appliance remotely only when the device is freshly installed and not connected to Mysonicwall.

IBM Storage Defender - Resiliency Service 2.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 278749.

Static credentials exist in the PostgreSQL data used in ManageEngine Access Manager Plus (AMP) build 4309, ManageEngine Password Manager Pro, and ManageEngine PAM360. These credentials could allow a malicious actor to modify configuration data that would escalate their permissions from that of a low-privileged user to an Administrative user.

A vulnerability in Cisco Smart Software Manager Satellite could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by gaining access to the static credential that is stored on the local device. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.

A Use of Hard-coded Credentials vulnerability in Juniper Networks Junos OS on Junos Fusion satellite devices allows an attacker who is local to the device to elevate their privileges and take control of the device. This issue affects: Juniper Networks Junos OS Junos Fusion Satellite Devices. 16.1 versions prior to 16.1R7-S7; 17.1 versions prior to 17.1R2-S12, 17.1R3-S2; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10; 17.4 version 17.4R3 and later versions; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affected Junos OS releases prior to 16.1R1 or all 19.2R3 and 19.4R3 release versions.

Android App 'Wolt Delivery: Food and more' version 4.27.2 and earlier uses hard-coded credentials (API key for an external service), which may allow a local attacker to obtain the hard-coded API key via reverse-engineering the application binary.

The centralized management feature for Utimaco Safeguard stores hard-coded cryptographic keys in executable programs for encrypted configuration files, which allows attackers to recover the keys from the configuration files and decrypt the disk drive.

A vulnerability was identified in FNKvision Y215 CCTV Camera 10.194.120.40. Affected by this issue is some unknown functionality of the file /etc/passwd of the component Firmware. Such manipulation leads to hard-coded credentials. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda AC20 16.03.08.12. Affected by this vulnerability is an unknown functionality of the file /etc_ro/shadow. The manipulation leads to hard-coded credentials. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

This vulnerability enables ssh access to minikube container using a default password.

A vulnerability, which was classified as critical, has been found in LB-LINK BL-AC3600 1.0.22. Affected by this issue is some unknown functionality of the file /etc/shadow. The manipulation with the input root:blinkadmin leads to hard-coded credentials. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A CWE-321: Use of hard-coded cryptographic key stored in cleartext vulnerability exists in Easergy Builder V1.4.7.2 and prior which could allow an attacker to decrypt a password.

CarbonFTP v1.4 uses insecure proprietary password encryption with a hard-coded weak encryption key. The key for local FTP server passwords is hard-coded in the binary.

ISOS firmwares from versions 1.81 to 2.00 contain hardcoded credentials from embedded StreamX installer that integrators are not forced to change.

IBM QRadar SIEM 7.3 and 7.4 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 191748.

IBM Spectrum LSF 10.1 and IBM Spectrum LSF Suite 10.2 could allow a user on the local network who has privileges to submit LSF jobs to execute arbitrary commands. IBM X-Force ID: 192586.

Due to the implementation of "deriveVaultKey", prior to version 7.10, the generated vault key would always have the last 16 bytes predetermined to be "arfoobarfoobarfo". This issue happens because "deriveVaultKey" calls "retrieveCloudKey" (which will always return "foobarfoobarfoobarfoobarfoobarfo" as the key), and then merges the 32byte randomly generated key with this key (by takeing 16bytes from each, see "mergeKeys"). This makes the key a lot weaker. This issue does not persist in devices that were initialized on/after version 7.10, but devices that were initialized before that and updated to a newer version still have this issue. Roll an update that enforces the full 32bytes key usage.

Precor touchscreen console P62, P80, and P82 could allow a remote attacker (within the local network) to bypass security restrictions, and access the service menu, because there is a hard-coded service code.

IBM Publishing Engine 2.1.2 and 6.0.5 contains an undisclosed vulnerability that could allow a local user with administrative privileges to obtain hard coded user credentials. IBM X-Force ID: 137022.

The vulnerability allows an unprivileged (untrusted) third- party application to arbitrary modify the server settings of the Android Client application, inducing it to connect to an attacker - controlled malicious server.This is possible by forging a valid broadcast intent encrypted with a hardcoded RSA key pair

A use of hard-coded credentials vulnerability [CWE-798] in FortiTester 2.3.0 through 7.2.3 may allow an attacker who managed to get a shell on the device to access the database via shell commands.

A CWE-798: Use of Hard-coded Credentials vulnerability exists that could cause local privilege escalation when local attacker connects to the database. Affected Products: APC Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GA), APC Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GA-01-22261), Schneider Electric Easy UPS Online Monitoring Software (Windows 7, 10, 11 & Windows Server 2016, 2019, 2022 - Versions prior to V2.5-GS), Schneider Electric Easy UPS Online Monitoring Software (Windows 11, Windows Server 2019, 2022 - Versions prior to V2.5-GS-01-22261)

Boston Scientific ZOOM LATITUDE PRM Model 3120 uses a hard-coded cryptographic key to encrypt PHI prior to having it transferred to removable media. CVSS v3 base score: 4.6; CVSS vector string: AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/hostapd* permissions.

Studyplus App for Android v6.3.7 and earlier and Studyplus App for iOS v8.29.0 and earlier use a hard-coded API key for an external service. By exploiting this vulnerability, API key for an external service may be obtained by analyzing data in the app.

BD Totalys MultiProcessor, versions 1.70 and earlier, contain hardcoded credentials. If exploited, threat actors may be able to access, modify or delete sensitive information, including electronic protected health information (ePHI), protected health information (PHI) and personally identifiable information (PII). Customers using BD Totalys MultiProcessor version 1.70 with Microsoft Windows 10 have additional operating system hardening configurations which increase the attack complexity required to exploit this vulnerability.

A Use of Hard-Coded Credentials issue was discovered in MRD-305-DIN versions older than 1.7.5.0, and MRD-315, MRD-355, MRD-455 versions older than 1.7.5.0. The device utilizes hard-coded credentials, which could allow for unauthorized local low-privileged access to the device.

TOTOLINK A860R V4.1.2cu.5182_B20201027 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

Zoom Rooms for macOS clients before version 5.11.4 contain an insecure key generation mechanism. The encryption key used for IPC between the Zoom Rooms daemon service and the Zoom Rooms client was generated using parameters that could be obtained by a local low-privileged application. That key can then be used to interact with the daemon service to execute privileged functions and cause a local denial of service.

The root password of the Loxone Miniserver Go Gen.2 before 14.2 is calculated using hard-coded secrets and the MAC address. This allows a local user to calculate the root password and escalate privileges.

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)), CP-8050 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)). The affected devices contain a hard-coded ID in the SSH `authorized_keys` configuration file. An attacker with knowledge of the corresponding private key could login to the device via SSH. Only devices with activated debug support are affected.

TOTOLINK A810R V4.1.2cu.5182_B20201026 and V5.9c.4050_B20190424 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 was discovered to contain a hardcoded password for root at /etc/shadow.sample.

Dell EMC SCG Policy Manager, versions from 5.10 to 5.12, contain(s) a Hard-coded Password Vulnerability. An attacker, with the knowledge of the hard-coded credentials, could potentially exploit this vulnerability to login to the system to gain admin privileges.

CWE-798: Use of hard-coded credentials vulnerability exists that could cause local privilege escalation when logged in as a non-administrative user.

A vulnerability was found in GE Voluson S8. It has been rated as critical. This issue affects the Service Browser which itroduces hard-coded credentials. Attacking locally is a requirement. It is recommended to change the configuration settings.

An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.2. The software uses a secure password for database access, but this password is shared across instances.

Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.

Hard-coded credentials in the B. Braun Melsungen AG SpaceCom Version L81/U61 and earlier, and the Data module compactplus Versions A10 and A11 enable attackers with command line access to access the device’s Wi-Fi module.

Windows Local Security Authority (LSA) Elevation of Privilege Vulnerability

Unisys Stealth(core) before 4.0.134 stores passwords in a recoverable format. Therefore, a search of Enterprise Manager can potentially reveal credentials.

An issue was discovered in SolarWinds N-Central 12.3.0.670. Hard-coded Credentials exist by default for local user accounts named support@n-able.com and nableadmin@n-able.com. These allow logins to the N-Central Administrative Console (NAC) and/or the regular web interface.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3), LOGO! Soft Comfort (All versions < V8.3). The encryption of program data for the affected devices uses a static key. An attacker could use this key to extract confidential information from protected program files.

ROZCOM client CWE-798: Use of Hard-coded Credentials

Cellebrite UFED 5.0 through 7.29 uses four hardcoded RSA private keys to authenticate to the ADB daemon on target devices. Extracted keys can be used to place evidence onto target devices when performing a forensic extraction.