mount.ecryptfs_private.c in eCryptfs-utils does not validate mount destination filesystem types, which allows local users to gain privileges by mounting over a nonstandard filesystem, as demonstrated by /proc/$pid.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

certain VT-d IOMMUs may not work in shared page table mode For efficiency reasons, address translation control structures (page tables) may (and, on suitable hardware, by default will) be shared between CPUs, for second-level translation (EPT), and IOMMUs. These page tables are presently set up to always be 4 levels deep. However, an IOMMU may require the use of just 3 page table levels. In such a configuration the lop level table needs to be stripped before inserting the root table's address into the hardware pagetable base register. When sharing page tables, Xen erroneously skipped this stripping. Consequently, the guest is able to write to leaf page table entries.

PCI devices with RMRRs not deassigned correctly Certain PCI devices in a system might be assigned Reserved Memory Regions (specified via Reserved Memory Region Reporting, "RMRR"). These are typically used for platform tasks such as legacy USB emulation. If such a device is passed through to a guest, then on guest shutdown the device is not properly deassigned. The IOMMU configuration for these devices which are not properly deassigned ends up pointing to a freed data structure, including the IO Pagetables. Subsequent DMA or interrupts from the device will have unpredictable behaviour, ranging from IOMMU faults to memory corruption.

A flaw was found in the way Linux kernel KVM hypervisor before 4.18 emulated instructions such as sgdt/sidt/fxsave/fxrstor. It did not check current privilege(CPL) level while emulating unprivileged instructions. An unprivileged guest user/process could use this flaw to potentially escalate privileges inside guest.

In fuse before versions 2.9.8 and 3.x before 3.2.5, fusermount is vulnerable to a restriction bypass when SELinux is active. This allows non-root users to mount a FUSE file system with the 'allow_other' mount option regardless of whether 'user_allow_other' is set in the fuse configuration. An attacker may use this flaw to mount a FUSE file system, accessible by other users, and trick them into accessing files on that file system, possibly causing Denial of Service or other unspecified effects.

The scipy.weave component in SciPy before 0.12.1 creates insecure temporary directories.

mom creates world-writable pid files in /var/run

The Debian shadow package before 1:4.5-1 for Shadow incorrectly lists pts/0 and pts/1 as physical terminals in /etc/securetty. This allows local users to login as password-less users even if they are connected by non-physical means such as SSH (hence bypassing PAM's nullok_secure configuration). This notably affects environments such as virtual machines automatically generated with a default blank root password, allowing all local users to escalate privileges.

IPython (Interactive Python) is a command shell for interactive computing in multiple programming languages, originally developed for the Python programming language. Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine. All users are advised to upgrade.

A Privilege Escalation vulnerability exits in Fedoraproject Sectool due to an incorrect DBus file.

It was discovered that a systemd service that uses DynamicUser property can create a SUID/SGID binary that would be allowed to run as the transient service UID/GID even after the service is terminated. A local attacker may use this flaw to access resources that will be owned by a potentially different service in the future, when the UID/GID will be recycled.

In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability.

atop: symlink attack possible due to insecure tempfile handling

Buffer overflow in glob function of glibc allows attackers to cause a denial of service (crash) and possibly execute arbitrary code via a glob pattern that ends in a brace "{" character.

Insufficient validation of environment variables in the telnet client supplied in Junos OS can lead to stack-based buffer overflows, which can be exploited to bypass veriexec restrictions on Junos OS. A stack-based overflow is present in the handling of environment variables when connecting via the telnet client to remote telnet servers. This issue only affects the telnet client — accessible from the CLI or shell — in Junos OS. Inbound telnet services are not affected by this issue. This issue affects: Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S13; 12.3X48 versions prior to 12.3X48-D80; 14.1X53 versions prior to 14.1X53-D130, 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X49 versions prior to 15.1X49-D170; 15.1X53 versions prior to 15.1X53-D237, 15.1X53-D496, 15.1X53-D591, 15.1X53-D69; 16.1 versions prior to 16.1R3-S11, 16.1R7-S4; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R2-S7, 17.2R3-S1; 17.3 versions prior to 17.3R3-S4; 17.4 versions prior to 17.4R1-S6, 17.4R2-S3, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S3; 18.2 versions prior to 18.2R1-S5, 18.2R2-S2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2.

The snprintf function in the db library 1.85.4 ignores the size parameter, which could allow attackers to exploit buffer overflows that would be prevented by a properly implemented snprintf.

Buffer overflow in bash 2.0.0, 1.4.17, and other versions allows local attackers to gain privileges by creating an extremely large directory name, which is inserted into the password prompt via the \w option in the PS1 environmental variable when another user changes into that directory.

An issue was discovered in the Linux kernel 3.11 through 5.10.16, as used by Xen. To service requests to the PV backend, the driver maps grant references provided by the frontend. In this process, errors may be encountered. In one case, an error encountered earlier might be discarded by later processing, resulting in the caller assuming successful mapping, and hence subsequent operations trying to access space that wasn't mapped. In another case, internal state would be insufficiently updated, preventing safe recovery from the error. This affects drivers/block/xen-blkback/blkback.c.

The Linux kernel before 2.6.32.4 allows local users to gain privileges or cause a denial of service (panic) by calling the (1) mmap or (2) mremap function, aka the "do_mremap() mess" or "mremap/mmap mess."

Use-after-free vulnerability in hw/ide/ahci.c in QEMU, when built with IDE AHCI Emulation support, allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via an invalid AHCI Native Command Queuing (NCQ) AIO command.

The CUPS AppArmor profile incorrectly confined the dnssd backend due to use of hard links. A local attacker could possibly use this issue to escape confinement. This flaw affects versions prior to 2.2.7-1ubuntu2.1 in Ubuntu 18.04 LTS, prior to 2.2.4-7ubuntu3.1 in Ubuntu 17.10, prior to 2.1.3-4ubuntu0.5 in Ubuntu 16.04 LTS, and prior to 1.7.2-0ubuntu1.10 in Ubuntu 14.04 LTS.

The Linux kernel 4.15 has a Buffer Overflow via an SNDRV_SEQ_IOCTL_SET_CLIENT_POOL ioctl write operation to /dev/snd/seq by a local user.

Go before 1.8.7, Go 1.9.x before 1.9.4, and Go 1.10 pre-releases before Go 1.10rc2 allow "go get" remote command execution during source code build, by leveraging the gcc or clang plugin feature, because -fplugin= and -plugin= arguments were not blocked.

Turning all screens off in Plasma-workspace and kscreenlocker while the lock screen is shown can result in the screen being unlocked when turning a screen on again.

The load_multiboot function in hw/i386/multiboot.c in Quick Emulator (aka QEMU) allows local guest OS users to execute arbitrary code on the QEMU host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access.

In the function wmi_set_ie(), the length validation code does not handle unsigned integer overflow properly. As a result, a large value of the 'ie_len' argument can cause a buffer overflow in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD Android) using the Linux Kernel.

vim is vulnerable to Heap-based Buffer Overflow

udisks before 1.0.3 allows a local user to load arbitrary Linux kernel modules.

util/virlog.c in libvirt does not properly determine the hostname on LXC container startup, which allows local guest OS users to bypass an intended container protection mechanism and execute arbitrary commands via a crafted NSS module.

xvfb-run 1.6.1 in Debian GNU/Linux, Ubuntu, Fedora 10, and possibly other operating systems place the magic cookie (MCOOKIE) on the command line, which allows local users to gain privileges by listing the process and its arguments.

The futex_requeue function in kernel/futex.c in the Linux kernel before 4.14.15 might allow attackers to cause a denial of service (integer overflow) or possibly have unspecified other impact by triggering a negative wake or requeue value.

Terminology 0.7.0 allows remote attackers to execute arbitrary commands via escape sequences that modify the window title and then are written to the terminal, a similar issue to CVE-2003-0063.

In macOS High Sierra before 10.13.5, an issue existed in CUPS. This issue was addressed with improved access restrictions.

GMXRC.bash in Gromacs 4.5.1 and earlier places a zero-length directory name in the LD_LIBRARY_PATH, which allows local users to gain privileges via a Trojan horse shared library in the current working directory. NOTE: CVE disputes this issue because the GMXLDLIB value is always added to the beginning of LD_LIBRARY_PATH at a later point in the script

vim is vulnerable to Heap-based Buffer Overflow

An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host.

A flaw was found in the KVM's AMD code for supporting SVM nested virtualization. The flaw occurs when processing the VMCB (virtual machine control block) provided by the L1 guest to spawn/handle a nested guest (L2). Due to improper validation of the "virt_ext" field, this issue could allow a malicious L1 to disable both VMLOAD/VMSAVE intercepts and VLS (Virtual VMLOAD/VMSAVE) for the L2 guest. As a result, the L2 guest would be allowed to read/write physical pages of the host, resulting in a crash of the entire system, leak of sensitive data or potential guest-to-host escape.

A flaw was found in the KVM's AMD code for supporting SVM nested virtualization. The flaw occurs when processing the VMCB (virtual machine control block) provided by the L1 guest to spawn/handle a nested guest (L2). Due to improper validation of the "int_ctl" field, this issue could allow a malicious L1 to enable AVIC support (Advanced Virtual Interrupt Controller) for the L2 guest. As a result, the L2 guest would be allowed to read/write physical pages of the host, resulting in a crash of the entire system, leak of sensitive data or potential guest-to-host escape. This flaw affects Linux kernel versions prior to 5.14-rc7.

The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution. QEMU up to (including) 5.2.0 is affected by this.

IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).

Yubico libu2f-host 1.1.6 contains unchecked buffers in devs.c, which could enable a malicious token to exploit a buffer overflow. An attacker could use this to attempt to execute malicious code using a crafted USB device masquerading as a security token on a computer where the affected library is currently in use. It is not possible to perform this attack with a genuine YubiKey.

An issue was discovered in gThumb through 3.6.2. There is a double-free vulnerability in the add_themes_from_dir method in dlg-contact-sheet.c because of two successive calls of g_free, each of which frees the same buffer.

The bpf verifier in the Linux kernel did not properly handle mod32 destination register truncation when the source register was known to be 0. A local attacker with the ability to load bpf programs could use this gain out-of-bounds reads in kernel memory leading to information disclosure (kernel memory), and possibly out-of-bounds writes that could potentially lead to code execution. This issue was addressed in the upstream kernel in commit 9b00f1b78809 ("bpf: Fix truncation handling for mod32 dst reg wrt zero") and in Linux stable kernels 5.11.2, 5.10.19, and 5.4.101.

An allocation of memory without limits, that could result in the stack clashing with another memory region, was discovered in systemd-journald when a program with long command line arguments calls syslog. A local attacker may use this flaw to crash systemd-journald or escalate his privileges. Versions through v240 are vulnerable.

The trace_writeback_dirty_page implementation in include/trace/events/writeback.h in the Linux kernel before 4.4 improperly interacts with mm/migrate.c, which allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by triggering a certain page move.

net/llc/sysctl_net_llc.c in the Linux kernel before 3.19 uses an incorrect data type in a sysctl table, which allows local users to obtain potentially sensitive information from kernel memory or possibly have unspecified other impact by accessing a sysctl entry.

Heap-based buffer overflow in closefs.c in the libext2fs library in e2fsprogs before 1.42.12 allows local users to execute arbitrary code by causing a crafted block group descriptor to be marked as dirty. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0247.

In the Linux kernel before 5.12.4, net/bluetooth/hci_event.c has a use-after-free when destroying an hci_chan, aka CID-5c4c8c954409. This leads to writing an arbitrary value.

modules/chef.py in SaltStack before 2014.7.4 does not properly handle files in /tmp.