A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748.

Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 4.2 before 4.2.209.0; 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.196.0; and 5.2 before 5.2.193.11 allows remote authenticated users to cause a denial of service (device reload) via crafted HTTP packets that trigger invalid arguments to the emweb component, aka Bug ID CSCtd16938.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.

A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote authenticated users to cause a denial of service (traceback) by establishing many IPsec L2L tunnels from remote peer IP addresses, aka Bug ID CSCso15583.

A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to cause an affected system to reboot or shut down. The vulnerability is due to insufficient server-side authorization checks. An attacker who is logged in to the web-based management interface as a low-privileged user could exploit this vulnerability by sending a crafted HTTP request. A successful exploit could allow the attacker to use the low-privileged user account to reboot or shut down the affected system.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet.

A vulnerability in the Simple Network Management Protocol (SNMP) service of Cisco FXOS Software for Firepower 4100 Series and Firepower 9300 Security Appliances and of Cisco UCS 6300 Series Fabric Interconnects could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the improper handling of specific SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects all supported SNMP versions. To exploit this vulnerability through SNMPv2c or earlier, an attacker must know the SNMP community string that is configured on an affected device. To exploit this vulnerability through SNMPv3, the attacker must have valid credentials for an SNMP user who is configured on the affected device.

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect handling of multiple simultaneous device registrations on Cisco SSM On-Prem. An attacker could exploit this vulnerability by sending multiple device registration requests to Cisco SSM On-Prem. A successful exploit could allow the attacker to cause a DoS condition on an affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an unexpected reload of the device. This vulnerability is due to insufficient input validation of SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device using IPv4 or IPv6. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects all versions of SNMP (versions 1, 2c, and 3) and requires a valid SNMP community string or valid SNMPv3 user credentials.

A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device. This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174.

Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878.

Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.

The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209.

Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862.

The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.

The Supervisor 1.0.0.0 and 1.0.0.1 in Cisco Integrated Management Controller (IMC) before 2.0(9) allows remote authenticated users to cause a denial of service (IP interface outage) via crafted parameters in an HTTP request, aka Bug ID CSCuv38286.

Cisco NX-OS on Nexus 9000 devices 11.1(1c) allows remote authenticated users to cause a denial of service (device hang) via large files that are copied to a device's filesystem, aka Bug ID CSCuu77225.

Memory leak in Cisco IOS 12.2 in the Performance Routing Engine (PRE) module on uBR10000 devices allows remote authenticated users to cause a denial of service (memory consumption or PXF process crash) by sending docsIfMCmtsMib SNMP requests quickly, aka Bug ID CSCue65051.

The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.

Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.

The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.

The web administration interface on Cisco Wireless LAN Controller (WLC) devices before 7.0.241, 7.1.x through 7.4.x before 7.4.122, and 7.5.x and 7.6.x before 7.6.120 allows remote authenticated users to cause a denial of service (device crash) via unspecified parameters, aka Bug IDs CSCum65159 and CSCum65252.

Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition that prevents the creation of new SSL/Transport Layer Security (TLS) connections to an affected device. The vulnerability is due to incorrect handling of Base64-encoded strings. An attacker could exploit this vulnerability by opening many SSL VPN sessions to an affected device. The attacker would need to have valid user credentials on the affected device to exploit this vulnerability. A successful exploit could allow the attacker to overwrite a special system memory location, which will eventually result in memory allocation errors for new SSL/TLS sessions to the device, preventing successful establishment of these sessions. A reload of the device is required to recover from this condition. Established SSL/TLS connections to the device and SSL/TLS connections through the device are not affected. Note: Although this vulnerability is in the SSL VPN feature, successful exploitation of this vulnerability would affect all new SSL/TLS sessions to the device, including management sessions.

The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.

A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability. This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3.

The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.

The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.

A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.

A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.

The file-upload feature in Cisco Identity Services Engine (ISE) allows remote authenticated users to cause a denial of service (disk consumption and administration-interface outage) by uploading many files, aka Bug ID CSCui67519.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.

Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.

The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.

The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.

Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.