The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.

A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user.

A vulnerability in the implementation of the Lua interpreter integrated in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying Linux operating system of an affected device. The vulnerability is due to insufficient restrictions on the allowed Lua function calls within the context of user-supplied Lua scripts. A successful exploit could allow the attacker to trigger a heap overflow condition and execute arbitrary code with root privileges on the underlying Linux operating system of an affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to execute predetermined shell commands on other hosts. More Information: CSCuz03353. Known Affected Releases: 2.6.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550; Email Security Appliance devices before 7.1.5-104, 7.3 before 7.3.2-026, 7.5 before 7.5.2-203, and 7.6 before 7.6.3-019; and Content Security Management Appliance devices before 7.2.2-110, 7.7 before 7.7.0-213, and 7.8 and 7.9 before 7.9.1-102 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL, aka Bug IDs CSCzv85726, CSCzv44633, and CSCzv24579.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL sent over IPv4, aka Bug ID CSCzv69294.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

The HTTP Profiling functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.3.101.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP User-Agent header, aka Bug ID CSCuc15636.

The administrative web interface on Cisco TelePresence Immersive Endpoint Devices before 1.7.4 allows remote authenticated users to execute arbitrary commands via a malformed request on TCP port 443, aka Bug ID CSCtn99724.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.