NVIDIA vGPU driver contains a vulnerability in the Virtual GPU Manager (vGPU plugin) where it allows guests to control unauthorized resources, which may lead to integrity and confidentiality loss or information disclosure. This affects vGPU version 12.x (prior to 12.2), version 11.x (prior to 11.4) and version 8.x (prior to 8.7).
Secunia CSI Agent 6.0.0.15017 and earlier, 6.0.1.1007 and earlier, and 7.0.0.21 and earlier, when running on Red Hat Linux, uses world-readable and world-writable permissions for /etc/csia_config.xml, which allows local users to change CSI Agent configuration by modifying this file.
Unknown vulnerability in sockfilter for Linux kernel before 2.2.19 related to "boundary cases," with unknown impact.
A flaw was found in the Ansible Engine when the fetch module is used. An attacker could intercept the module, inject a new path, and then choose a new destination path on the controller node. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.
The net_ctl_permissions function in net/sysctl_net.c in the Linux kernel before 3.11.5 does not properly determine uid and gid values, which allows local users to bypass intended /proc/sys/net restrictions via a crafted application.
The flush_signal_handlers function in kernel/signal.c in the Linux kernel before 3.8.4 preserves the value of the sa_restorer field across an exec operation, which makes it easier for local users to bypass the ASLR protection mechanism via a crafted application containing a sigaction system call.
A WebExtension can request access to local files without the warning prompt stating that the extension will "Access your data for all websites" being displayed to the user. This allows extensions to run content scripts in local pages without permission warnings when a local file is opened. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.
The audit_syscall_entry function in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass certain syscall audit configurations via crafted syscalls, a related issue to CVE-2009-0342 and CVE-2009-0343.
The simple_set_acl function in fs/posix_acl.c in the Linux kernel before 4.9.6 preserves the setgid bit during a setxattr call involving a tmpfs filesystem, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-7097.
IBM Spectrum Protect Plus 10.1.0 through 10.1.6 does not invalidate session after a password reset which could allow a local user to impersonate another user on the system. IBM X-Force ID: 193657.
Tor Browser through 10.5.6 and 11.x through 11.0a4 allows a correlation attack that can compromise the privacy of visits to v2 onion addresses. Exact timestamps of these onion-service visits are logged locally, and an attacker might be able to compare them to timestamp data collected by the destination server (or collected by a rogue site within the Tor network).
The acpi_ns_terminate() function in drivers/acpi/acpica/nsutils.c in the Linux kernel before 4.12 does not flush the operand cache and causes a kernel stack dump, which allows local users to obtain sensitive information from kernel memory and bypass the KASLR protection mechanism (in the kernel through 4.9) via a crafted ACPI table.
A security flaw was found in Ansible Tower when requesting an OAuth2 token with an OAuth2 application. Ansible Tower uses the token to provide authentication. This flaw allows an attacker to obtain a refresh token that does not expire. The original token granted to the user still has access to Ansible Tower, which allows any user that can gain access to the token to be fully authenticated to Ansible Tower. This flaw affects Ansible Tower versions before 3.6.4 and Ansible Tower versions before 3.5.6.
A flaw was found in the Linux kernels SELinux LSM hook implementation before version 5.7, where it incorrectly assumed that an skb would only contain a single netlink message. The hook would incorrectly only validate the first netlink message in the skb and allow or deny the rest of the messages within the skb with the granted permission without further processing.
The prepare_vmcs02 function in arch/x86/kvm/vmx.c in the Linux kernel through 4.13.3 does not ensure that the "CR8-load exiting" and "CR8-store exiting" L0 vmcs02 controls exist in cases where L1 omits the "use TPR shadow" vmcs12 control, which allows KVM L2 guest OS users to obtain read and write access to the hardware CR8 register.
Hardlink before 0.1.2 operates on full file system objects path names which can allow a local attacker to use this flaw to conduct symlink attacks.
IBM Spectrum Protect Plus 10.1.0 through 10.1.4 uses insecure file permissions on restored files and directories in Windows which could allow a local user to obtain sensitive information or perform unauthorized actions. IBM X-Force ID: 170963.
IBM Cloud Automation Manager 3.2.1.0 does not renew a session variable after a successful authentication which could lead to session fixation/hijacking vulnerability. This could force a user to utilize a cookie that may be known to an attacker. IBM X-Force ID: 168645.
Unknown vulnerabilities in strnlen_user for Linux kernel before 2.2.19, with unknown impact.
yum-rhn-plugin in Red Hat Network Client Tools (aka rhn-client-tools) on Red Hat Enterprise Linux (RHEL) 5 and Fedora uses world-readable permissions for the /var/spool/up2date/loginAuth.pkl file, which allows local users to access the Red Hat Network profile, and possibly prevent future security updates, by leveraging authentication data from this file.
In systemd 240, bus_open_system_watch_bind_with_description in shared/bus-util.c (as used by systemd-resolved to connect to the system D-Bus instance), calls sd_bus_set_trusted, which disables access controls for incoming D-Bus messages. An unprivileged user can exploit this by executing D-Bus methods that should be restricted to privileged users, in order to change the system's DNS resolver settings.
The filesystem implementation in the Linux kernel through 4.8.2 preserves the setgid bit during a setxattr call, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions.
A flaw was discovered in ibus in versions before 1.5.22 that allows any unprivileged user to monitor and send method calls to the ibus bus of another user due to a misconfiguration in the DBus server setup. A local attacker may use this flaw to intercept all keystrokes of a victim user who is using the graphical interface, change the input method engine, or modify other input related configurations of the victim user.
A flaw was found in Ansible, where a user's controller is vulnerable to template injection. This issue can occur through facts used in the template if the user is trying to put templates in multi-line YAML strings and the facts being handled do not routinely include special template characters. This flaw allows attackers to perform command injection, which discloses sensitive information. The highest threat from this vulnerability is to confidentiality and integrity.
The __secure_computing function in kernel/seccomp.c in the seccomp subsystem in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform, when CONFIG_SECCOMP is enabled, does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass intended access restrictions via crafted syscalls that are misinterpreted as (a) stat or (b) chmod, a related issue to CVE-2009-0342 and CVE-2009-0343.
The default BKS keystore use an HMAC that is only 16 bits long, which can allow an attacker to compromise the integrity of a BKS keystore. Bouncy Castle release 1.47 changes the BKS format to a format which uses a 160 bit HMAC instead. This applies to any BKS keystore generated prior to BC 1.47. For situations where people need to create the files for legacy reasons a specific keystore type "BKS-V1" was introduced in 1.49. It should be noted that the use of "BKS-V1" is discouraged by the library authors and should only be used where it is otherwise safe to do so, as in where the use of a 16 bit checksum for the file integrity check is not going to cause a security issue in itself.
SPICE allows local guest OS users to read from or write to arbitrary host memory locations via crafted primary surface parameters, a similar issue to CVE-2015-5261.
Heap-based buffer overflow in SPICE before 0.12.6 allows guest OS users to read and write to arbitrary memory locations on the host via guest QXL commands related to surface creation.
fs/namespace.c in the Linux kernel before 4.0.2 processes MNT_DETACH umount2 system calls without verifying that the MNT_LOCKED flag is unset, which allows local users to bypass intended access restrictions and navigate to filesystem locations beneath a mount by calling umount2 within a user namespace.
madvise_remove in Linux kernel 2.6.16 up to 2.6.16.6 does not follow file and mmap restrictions, which allows local users to bypass IPC permissions and replace portions of readonly tmpfs files with zeroes, aka the MADV_REMOVE vulnerability. NOTE: this description was originally written in a way that combined two separate issues. The mprotect issue now has a separate name, CVE-2006-2071.
A patch for shadow-utils 20000902 causes the useradd command to create a mail spool files with read/write privileges of the new user's group (mode 660), which allows other users in the same group to read or modify the new user's incoming email.
The ioperm system call in Linux kernel 2.4.20 and earlier does not properly restrict privileges, which allows local users to gain read or write access to certain I/O ports.
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow a local user to read and write specific files due to weak file permissions. IBM X-Force ID: 192469.
PicketBox and JBossSX, as used in Red Hat JBoss Enterprise Application Platform (JBEAP) 6.2.2 and JBoss BRMS before 6.0.3 roll up patch 2, allows remote authenticated users to read and modify the application sever configuration and state by deploying a crafted application.
User credentials can be manipulated and stolen by Native CephFS consumers of OpenStack Manila, resulting in potential privilege escalation. An Open Stack Manila user can request access to a share to an arbitrary cephx user, including existing users. The access key is retrieved via the interface drivers. Then, all users of the requesting OpenStack project can view the access key. This enables the attacker to target any resource that the user has access to. This can be done to even "admin" users, compromising the ceph administrator. This flaw affects Ceph versions prior to 14.2.16, 15.x prior to 15.2.8, and 16.x prior to 16.2.0.
GNU Enscript 1.6.1 and earlier allows local users to overwrite arbitrary files of the Enscript user via a symlink attack on temporary files.
In the Linux kernel before 5.7.8, fs/nfsd/vfs.c (in the NFS server) can set incorrect permissions on new filesystem objects when the filesystem lacks ACL support, aka CID-22cf8419f131. This occurs because the current umask is not considered.
A memory leak flaw in the Linux kernel's hugetlbfs memory usage was found in the way the user maps some regions of memory twice using shmget() which are aligned to PUD alignment with the fault of some of the memory pages. A local user could use this flaw to get unauthorized access to some data.
Multiple integer signedness errors in the sg_scsi_ioctl function in scsi_ioctl.c for Linux 2.6.x allow local users to read or modify kernel memory via negative integers in arguments to the scsi ioctl, which bypass a maximum length check before calling the copy_from_user and copy_to_user functions.
The perf_trace_event_perm function in kernel/trace/trace_event_perf.c in the Linux kernel before 3.12.2 does not properly restrict access to the perf subsystem, which allows local users to enable function tracing via a crafted application.
A flaw was found in xorg-x11-server before 1.20.3. An incorrect permission check for -modulepath and -logfile options when starting Xorg. X server allows unprivileged users with the ability to log in to the system via physical console to escalate their privileges and run arbitrary code under root privileges.
oVirt users with MANIPULATE_STORAGE_DOMAIN permissions can attach a storage domain to any data-center
An improper authorization flaw was found in the Smart Class feature of Foreman. An attacker can use it to change configuration of any host registered in Red Hat Satellite, independent of the organization the host belongs to. This flaw affects all Red Hat Satellite 6 versions.
A flaw was found in keycloak before version 13.0.0. In some scenarios a user still has access to a resource after changing the role mappings in Keycloak and after expiration of the previous access token.
An Access Control vulnerability exists in SoroushPlus+ Messenger 1.0.30 in the Lock Screen Security Feature function due to insufficient permissions and privileges, which allows a malicious attacker bypass the lock screen function.
Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, does not properly enforce a user gesture requirement before proceeding with a file download, which might make it easier for remote attackers to execute arbitrary code via a crafted file.
IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.47, 7.0 before 7.0.0.29, 8.0 before 8.0.0.6, and 8.5 before 8.5.0.2 on Linux, Solaris, and HP-UX, when a Local OS registry is used, does not properly validate user accounts, which allows remote attackers to bypass intended access restrictions via unspecified vectors.
An authorization flaw was found in openstack-barbican, where anyone with an admin role could add secrets to a different project container. This flaw allows an attacker on the network to consume protected resources and cause a denial of service.
An authorization flaw was found in openstack-barbican. The default policy rules for the secret metadata API allowed any authenticated user to add, modify, or delete metadata from any secret regardless of ownership. This flaw allows an attacker on the network to modify or delete protected data, causing a denial of service by consuming protected resources.
IBM Security Guardium 11.3, 11.4, and 11.5 could allow a local user to obtain elevated privileges due to incorrect authorization checks. IBM X-Force ID: 216753.