In Solstice Pod before 3.3.0 (or Open4.3), the Administrator password can be enumerated using brute-force attacks via the /Config/service/initModel?password= Solstice Open Control API because there is no complexity requirement (e.g., it might be all digits or all lowercase letters).

In Solstice Pod before 3.0.3, the firmware can easily be decompiled/disassembled. The decompiled/disassembled files contain non-obfuscated code. NOTE: it is unclear whether lack of obfuscation is directly associated with a negative impact, or instead only facilitates an attack technique

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

Fuel CMS 1.5.0 has a brute force vulnerability in fuel/modules/fuel/controllers/Login.php

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. Prior to version 2.34.1, a missing password policy and brute-force protection makes the authentication process insecure. Attackers could mount a brute-force attack to retrieve the passwords of all accounts in a given instance. This issue has been patched in version 2.34.1.

Trilium Notes is an open-source, cross-platform hierarchical note taking application with focus on building large personal knowledge bases. In versions below 0.97.0, a brute-force protection bypass in the initial sync seed retrieval endpoint allows unauthenticated attackers to guess the login password without triggering rate limiting. Trilium is a single-user app without a username requirement, and brute-force protection bypass makes exploitation much more feasible. Multiple features provided by Trilium (e.g. MFA, share notes, custom request handler) indicate that Trilium can be exposed to the internet. This is fixed in version 0.97.0.

firefly-iii is vulnerable to Improper Restriction of Excessive Authentication Attempts

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been classified as problematic. Affected is an unknown function of the file /login of the component Captcha Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-247884.

It was found that all versions of 3Scale developer portal lacked brute force protections. An attacker could use this gap to bypass login controls, and access privileged information, or possibly conduct further attacks.

An issue was discovered in /cgi-bin/luci on Teltonika RTU9XX (e.g., RUT950) R_31.04.89 before R_00.05.00.5 devices. The authentication functionality is not protected from automated tools used to make login attempts to the application. An anonymous attacker has the ability to make unlimited login attempts with an automated tool. This ability could lead to cracking a targeted user's password.

Password guessing limits could be bypassed when using LDAP authentication.

Lack of protection against brute force attacks in M-Files Server before 23.12.13205.0 allows an attacker unlimited authentication attempts, potentially compromising targeted M-Files user accounts by guessing passwords.

IBM PowerSC 1.3, 2.0, and 2.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 275107.

By default, .ZED containers produced by PRIMX ZED! for Windows before Q.2020.3 (ANSSI qualification submission); ZED! for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before Q.2021.2 (ANSSI qualification submission); ZONECENTRAL for Windows before 2023.5; ZEDMAIL for Windows before 2023.5; and ZED! for Windows, Mac, Linux before 2023.5 include an encrypted version of sensitive user information, which could allow an unauthenticated attacker to obtain it via brute force.

An issue was discovered in app/Controller/UsersController.php in MISP 2.4.92. An adversary can bypass the brute-force protection by using a PUT HTTP method instead of a POST HTTP method in the login part, because this protection was only covering POST requests.

JHipster generator-jhipster before 2.23.0 allows a timing attack against validateToken due to a string comparison that stops at the first character that is different. Attackers can guess tokens by brute forcing one character at a time and observing the timing. This of course drastically reduces the search space to a linear amount of guesses based on the token length times the possible characters.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the shareinfo endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

An issue was discovered in Fimer Aurora Vision before 2.97.10. The response to a failed login attempt discloses whether the username or password is wrong, helping an attacker to enumerate usernames. This can make a brute-force attack easier.

In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 137773.

LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. In affected versions the login method has no rate limit. An attacker may be able to leverage this vulnerability to gain access to user accounts. This issue has been addressed in version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

onefilecms.php in OneFileCMS through 2012-04-14 might allow attackers to conduct brute-force attacks via the onefilecms_username and onefilecms_password fields.

index.php?r=site%2Flogin in EduSec through 4.2.6 does not restrict sending a series of LoginForm[username] and LoginForm[password] parameters, which might make it easier for remote attackers to obtain access via a brute-force approach.

IBM Engineering Lifecycle Optimization 7.0.2 and 7.0.3 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 268755.

CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

OX App Suite 7.10.1 to 7.10.3 has improper input validation for rate limits with a crafted User-Agent header, spoofed vacation notices, and /apps/load memory consumption.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

Improper Restriction of Excessive Authentication Attempts in RDT400 in SICK APU allows an unprivileged remote attacker to guess the password via trial-and-error as the login attempts are not limited.

Vulnerability of brute-force attacks on the device authentication module.Successful exploitation of this vulnerability may affect service confidentiality.

Vulnerability of brute-force attacks on the device authentication module.Successful exploitation of this vulnerability may affect service confidentiality.

HCL BigFix Mobile / Modern Client Management Admin and Config UI passwords can be brute-forced. User should be locked out for multiple invalid attempts.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

IBM Cloud Pak System 2.3.1.1, 2.3.2.0, and 2.3.3.7 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 260733.

IBM BigFix Platform 9.2 and 9.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 140756.

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

The MEAC300-FNADE4 does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

IBM Security Guardium 11.3 and 11.4 could disclose sensitive information to an attacker due to improper restriction of excessive authentication attempts. IBM X-Force ID: 240895.

A lack of rate limiting in Elenos ETG150 FM transmitter v3.12 allows attackers to obtain user credentials via brute force and cause other unspecified impacts.

SAP BusinessObjects Business Intelligence Platform - version 420, 430, allows an unauthorized attacker who had hijacked a user session, to be able to bypass the victim’s old password via brute force, due to unrestricted rate limit for password change functionality. Although the attack has no impact on integrity loss or system availability, this could lead to an attacker to completely takeover a victim’s account.

Cloud Foundry UAA, all versions prior to 4.20.0 and Cloud Foundry UAA Release, all versions prior to 61.0, allows brute forcing of MFA codes. A remote unauthenticated malicious user in possession of a valid username and password can brute force MFA to login as the targeted user.

Nextcloud server before 19.0.11, 20.0.10, 21.0.2 is vulnerable to brute force attacks due to lack of inclusion of IPv6 subnets in rate-limiting considerations. This could potentially result in an attacker bypassing rate-limit controls such as the Nextcloud brute-force protection.

Compaq/Microcom 6000 Access Integrator does not disconnect a client after a certain number of failed login attempts, which allows remote attackers to guess usernames or passwords via a brute force attack.

In Sorcery before 0.15.0, there is a brute force vulnerability when using password authentication via Sorcery. The brute force protection submodule will prevent a brute force attack for the defined lockout period, but once expired, protection will not be re-enabled until a user or malicious actor logs in successfully. This does not affect users that do not use the built-in brute force protection submodule, nor users that use permanent account lockout. This has been patched in 0.15.0.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

Improper Restriction of Excessive Authentication Attempts in the SICK ICR890-4 could allow a remote attacker to brute-force user credentials.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.