Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acos_service that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter.

NETGEAR R6200_V2 firmware versions through R6200v2-V1.0.3.12_10.1.11 and R6300_V2 firmware versions through R6300v2-V1.0.4.52_10.0.93 allow remote authenticated attackers to execute arbitrary command via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameters.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameter.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.

A command execution vulnerability exists in the access control functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SettingConfigController class. When parsing the fileName parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12121.

NETGEAR Prosafe WC9500 5.1.0.17, WC7600 5.1.0.17, and WC7520 2.5.0.35 devices allow a remote attacker to execute code with root privileges via shell metacharacters in the reqMethod parameter to login_handler.php.

Netgear Nighthawk R6700 version 1.0.4.120 contains a command injection vulnerability in update functionality of the device. By triggering a system update check via the SOAP interface, the device is susceptible to command injection via preconfigured values.

When uploading a firmware image to a Netgear Nighthawk Wifi6 Router (RAX30), a hidden “forceFWUpdate” parameter may be provided to force the upgrade to complete and bypass certain validation checks. End users can use this to upload modified, unofficial, and potentially malicious firmware to the device.

A vulnerability classified as critical has been found in Netgear EX6150 1.0.0.46_1.0.76. This affects the function sub_410090. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Netgear WG302v2 v5.2.9 and WAG302v2 v5.1.19 were discovered to contain multiple command injection vulnerabilities in the upgrade_handler function via the firmwareRestore and firmwareServerip parameters.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D7800 before 1.0.1.28, EX2700 before 1.0.1.32, EX6200v2 before 1.0.1.56, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.3.6, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.52, WN3100RPv2 before 1.0.0.42, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

NETGEAR ProSAFE Network Management System SettingConfigController Exposed Dangerous Function Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SettingConfigController class. The issue results from an exposed dangerous function. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. . Was ZDI-CAN-19725.

Netgear JWNR2000v2 v1.0.0.11, XWN5001 v0.4.1.1, and XAVN2001v2 v0.4.0.7 were discovered to contain multiple buffer overflows via the http_passwd and http_username parameters in the update_auth function.

A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.54, EX7000 before 1.0.1.94, EX7500 before 1.0.0.72, R6250 before 1.0.4.48, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.102, R6700v3 before 1.0.4.102, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7850 before 1.0.5.68, R7900 before 1.0.4.30, R7960P before 1.4.1.68, R8000 before 1.0.4.52, RAX200 before 1.0.2.88, RBS40V before 2.6.2.4, RS400 before 1.5.1.80, XR300 before 1.0.3.56, R7000P before 1.3.2.124, R8000P before 1.4.1.68, R8500 before 1.0.2.144, RAX80 before 1.0.3.102, R6900P before 1.3.2.124, R7900P before 1.4.1.68, R8300 before 1.0.2.144, RAX75 before 1.0.3.102, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, and RBK852 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability was found in Netgear EX6100 1.0.2.28_1.1.138. It has been rated as critical. Affected by this issue is the function sub_415EF8. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects CBR40 before 2.3.5.12, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, R6400 before 1.0.1.70, R7000 before 1.0.11.126, R6900P before 1.3.2.124, R7000P before 1.3.2.124, R7900 before 1.0.4.30, R8000 before 1.0.4.52, and WNR3500Lv2 before 1.2.0.62.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects EX6000 before 1.0.0.38, EX6120 before 1.0.0.48, EX6130 before 1.0.0.30, R6300v2 before 1.0.4.52, R6400 before 1.0.1.52, R7000 before 1.0.11.126, R7900 before 1.0.4.30, R8000 before 1.0.4.52, R7000P before 1.3.2.124, R8000P before 1.4.1.50, RAX80 before 1.0.3.88, R6900P before 1.3.2.124, R7900P before 1.4.1.50, and RAX75 before 1.0.3.88.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R6300v2 before 1.0.4.52, R6400 before 1.0.1.52, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R7900 before 1.0.3.18, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.3.88, RAX80 before 1.0.3.88, and WNR3500Lv2 before 1.2.0.62.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D3600 before 1.0.0.72, D6000 before 1.0.0.72, D6200 before 1.1.00.34, D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000 before 1.0.1.74, D7000v2 before 1.0.0.53, D7800 before 1.0.1.56, D8500 before 1.0.3.44, DC112A before 1.0.0.42, DGN2200Bv4 before 1.0.0.109, DGN2200v4 before 1.0.0.110, DM200 before 1.0.0.61, EX3700 before 1.0.0.76, EX3800 before 1.0.0.76, EX6120 before 1.0.0.46, EX6130 before 1.0.0.28, EX7000 before 1.0.1.78, PR2000 before 1.0.0.28, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6250 before 1.0.4.34, R6300v2 before 1.0.4.34, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.6, R6900 before 1.0.2.6, R7000 before 1.0.9.34, R7100LG before 1.0.0.50, R7500v2 before 1.0.3.40, R7900P before 1.4.1.50, R8000P before 1.4.1.50, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN3000RPv2 before 1.0.0.78, WNDR3400v3 before 1.0.1.24, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.56.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects GS108Tv2 before 5.4.2.36, GS110TPP before 7.0.7.2, GS110TPv2 before 5.4.2.36., GS110TPv3 before 7.0.7.2, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by privilege escalation. This affects R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, and RS400 before 1.5.1.80.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.64, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7900P before 1.4.2.84, R7960P before 1.4.2.84, and R8000P before 1.4.2.84.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.68, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7900 before 1.0.4.38, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, and XR300 before 1.0.3.50.

NETGEAR D6220 devices before 1.0.0.76 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, RAX200 before 1.0.5.126, RAX75 before 1.0.5.126, and RAX80 before 1.0.5.126.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects AC2100 before 1.2.0.88, AC2400 before 1.2.0.88, AC2600 before 1.2.0.88, D7000 before 1.0.1.82, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.2.0.88, R6800 before 1.2.0.88, R6850 before 1.1.0.84, R6900v2 before 1.2.0.88, R7200 before 1.2.0.88, R7350 before 1.2.0.88, R7400 before 1.2.0.88, and R7450 before 1.2.0.88.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D3600 before 1.0.0.72, D6000 before 1.0.0.72, D6200 before 1.1.00.34, D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000 before 1.0.1.74, D7000v2 before 1.0.0.53, D7800 before 1.0.1.56, D8500 before 1.0.3.44, DC112A before 1.0.0.42, DGN2200v4 before 1.0.0.110, DGND2200Bv4 before 1.0.0.109, DM200 before 1.0.0.61, EX3700 before 1.0.0.76, EX3800 before 1.0.0.76, EX6120 before 1.0.0.46, EX6130 before 1.0.0.28, EX7000 before 1.0.1.78, PR2000 before 1.0.0.28, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6250 before 1.0.4.34, R6300v2 before 1.0.4.34, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v3 before 1.0.2.66, R6900 before 1.0.2.6, R7000 before 1.0.9.34, R7100LG before 1.0.0.50, R7500v2 before 1.0.3.40, R7900P before 1.4.1.50, R8000P before 1.4.1.50, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBK40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR20 before 2.3.0.28, RBR40 before 2.3.0.28, RBR50 before 2.3.0.32, RBS20 before 2.3.0.28, RBS40 before 2.3.0.28, RBS50 before 2.3.0.32, WN3000RPv2 before 1.0.0.78, WNDR3400v3 before 1.0.1.24, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, WNR3500Lv2 before 1.2.0.62, XR450 before 2.3.2.56, and XR500 before 2.3.2.56.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects LBR20 before 2.6.3.50, RBS50Y before 2.7.3.22, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.

Certain NETGEAR devices are affected by authentication bypass. This affects R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000P before 1.4.2.84, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R7000 before 1.0.11.126, R7960P before 1.4.2.84, R8000 before 1.0.4.74, RAX200 before 1.0.4.120, R8000P before 1.4.2.84, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.4.120, R7900P before 1.4.2.84, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.4.120.