The VMware Workspace ONE Unified Endpoint Management Console (A/W Console) 9.7.x prior to 9.7.0.3, 9.6.x prior to 9.6.0.7, 9.5.x prior to 9.5.0.16, 9.4.x prior to 9.4.0.22, 9.3.x prior to 9.3.0.25, 9.2.x prior to 9.2.3.27, and 9.1.x prior to 9.1.5.6 contains a SAML authentication bypass vulnerability which can be leveraged during device enrollment. This vulnerability may allow for a malicious actor to impersonate an authorized SAML session if certificate-based authentication is enabled. This vulnerability is also relevant if certificate-based authentication is not enabled, but the outcome of exploitation is limited to an information disclosure (Important Severity) in those cases.

VMware vCenter Server 5.5 before u3 and 6.0 before u1 does not verify X.509 certificates from TLS LDAP servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

Spring Security versions 5.1.x prior to 5.1.2 contain an authorization bypass vulnerability during JWT issuer validation. In order to be impacted, the same private key for an honest issuer and a malicious user must be used when signing JWTs. In that case, a malicious user could fashion signed JWTs with the malicious issuer URL that may be granted for the honest issuer.

Dell EMC Avamar Client Manager in Dell EMC Avamar Server versions 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.4.0, 7.4.1, 7.5.0, 7.5.1, 18.1 and Dell EMC Integrated Data Protection Appliance (IDPA) versions 2.0, 2.1 and 2.2 contain an open redirection vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to redirect application users to arbitrary web URLs by tricking the victim users to click on maliciously crafted links. The vulnerability could be used to conduct phishing attacks that cause users to unknowingly visit malicious sites.

VMware vSphere Client 5.0 before Update 3 and 5.1 before Update 2 does not properly validate X.509 certificates, which allows man-in-the-middle attackers to spoof SSL servers via a crafted certificate.

Open Redirect vulnerability exists in VMware vRealize Log Insight prior to 8.1.0 due to improper Input validation.

VMware vSphere ESXi (6.7 prior to ESXi670-201810101-SG, 6.5 prior to ESXi650-201811102-SG, and 6.0 prior to ESXi600-201807103-SG) and VMware vCenter Server (6.7 prior to 6.7 U1b, 6.5 prior to 6.5 U2b, and 6.0 prior to 6.0 U3j) contain an information disclosure vulnerability in clients arising from insufficient session expiration. An attacker with physical access or an ability to mimic a websocket connection to a user’s browser may be able to obtain control of a VM Console after the user has logged out or their session has timed out.

In Spring Security, versions 6.1.x prior to 6.1.7 and versions 6.2.x prior to 6.2.2, an application is vulnerable to broken access control when it directly uses the AuthenticationTrustResolver.isFullyAuthenticated(Authentication) method. Specifically, an application is vulnerable if: * The application uses AuthenticationTrustResolver.isFullyAuthenticated(Authentication) directly and a null authentication parameter is passed to it resulting in an erroneous true return value. An application is not vulnerable if any of the following is true: * The application does not use AuthenticationTrustResolver.isFullyAuthenticated(Authentication) directly. * The application does not pass null to AuthenticationTrustResolver.isFullyAuthenticated * The application only uses isFullyAuthenticated via Method Security https://docs.spring.io/spring-security/reference/servlet/authorization/method-security.html  or HTTP Request Security https://docs.spring.io/spring-security/reference/servlet/authorization/authorize-http-requests.html

Pivotal Spring AMQP, 1.x versions prior to 1.7.10 and 2.x versions prior to 2.0.6, expose a man-in-the-middle vulnerability due to lack of hostname validation. A malicious user that has the ability to intercept traffic would be able to view data in transit.

VMware Workspace ONE SDK and dependent mobile application updates address sensitive information disclosure vulnerability.

In spring cloud gateway versions prior to 3.1.1+ , applications that are configured to enable HTTP2 and no key store or trusted certificates are set will be configured to use an insecure TrustManager. This makes the gateway able to connect to remote services with invalid or custom certificates.

Sensitive information disclosure vulnerability resulting from a lack of certificate validation during the File-Based Backup and Restore operations of VMware vCenter Server Appliance (6.7 before 6.7u3a and 6.5 before 6.5u3d) may allow a malicious actor to intercept sensitive data in transit over SCP. A malicious actor with man-in-the-middle positioning between vCenter Server Appliance and a backup target may be able to intercept sensitive data in transit during File-Based Backup and Restore operations.

Sensitive information disclosure vulnerability resulting from a lack of certificate validation during the File-Based Backup and Restore operations of VMware vCenter Server Appliance (6.7 before 6.7u3a and 6.5 before 6.5u3d) may allow a malicious actor to intercept sensitive data in transit over FTPS and HTTPS. A malicious actor with man-in-the-middle positioning between vCenter Server Appliance and a backup target may be able to intercept sensitive data in transit during File-Based Backup and Restore operations.

An Improper Certificate Validation weakness in the SRX Series Application Identification (app-id) signature update client of Juniper Networks Junos OS allows an attacker to perform Man-in-the-Middle (MitM) attacks which may compromise the integrity and confidentiality of the device. This issue affects: Juniper Networks Junos OS 15.1X49 versions prior to 15.1X49-D120 on SRX Series devices. No other versions of Junos OS are affected.

A vulnerability exists in the component RTU500 Scripting interface. When a client connects to a server using TLS, the server presents a certificate. This certificate links a public key to the identity of the service and is signed by a Certification Authority (CA), allowing the client to validate that the remote service can be trusted and is not malicious. If the client does not validate the parameters of the certificate, then attackers could be able to spoof the identity of the service. An attacker could exploit the vulnerability by using faking the identity of a RTU500 device and intercepting the messages initiated via the RTU500 Scripting interface.

Cerulean Studios Trillian 3.1 Basic does not check SSL certificates during MSN authentication, which allows remote attackers to obtain MSN credentials via a man-in-the-middle attack with a spoofed SSL certificate.

The int_x509_param_set_hosts function in lib/libcrypto/x509/x509_vpm.c in LibreSSL 2.7.0 before 2.7.1 does not support a certain special case of a zero name length, which causes silent omission of hostname verification, and consequently allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. NOTE: the LibreSSL documentation indicates that this special case is supported, but the BoringSSL documentation does not.

The Certificate Trust Policy component in Apple Mac OS X before 10.6.8 does not perform CRL checking for Extended Validation (EV) certificates that lack OCSP URLs, which might allow man-in-the-middle attackers to spoof an SSL server via a revoked certificate.

A vulnerability exists in the FOXMAN-UN/UNEM server that affects the message queueing mechanism’s certificate validation. If exploited an attacker could spoof a trusted entity causing a loss of confidentiality and integrity.

lib/oauth/consumer.rb in the oauth-ruby gem through 0.5.4 for Ruby does not verify server X.509 certificates if a certificate bundle cannot be found, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information.

The PrinterLogic Print Management software, versions up to and including 18.3.1.96, does not validate, or incorrectly validates, the PrinterLogic management portal's SSL certificate. When a certificate is invalid or malicious, it might allow an attacker to spoof a trusted entity by using a man-in-the-middle (MITM) attack. The software might connect to a malicious host while believing it is a trusted host, or the software might be deceived into accepting spoofed data that appears to originate from a trusted host.

Improper Certificate Validation in GitHub repository pyload/pyload prior to 0.5.0b3.dev44.

A vulnerability has been identified in Siveillance VMS Video for Android (All versions < V12.1a (2018 R1)), Siveillance VMS Video for iOS (All versions < V12.1a (2018 R1)). Improper certificate validation could allow an attacker in a privileged network position to read data from and write data to the encrypted communication channel between the app and a server. The security vulnerability could be exploited by an attacker in a privileged network position which allows intercepting the communication channel between the affected app and a server (such as Man-in-the-Middle). Furthermore, an attacker must be able to generate a certificate that results for the validation algorithm in a checksum identical to a trusted certificate. Successful exploitation requires no user interaction. The vulnerability could allow reading data from and writing data to the encrypted communication channel between the app and a server, impacting the communication's confidentiality and integrity. At the time of advisory publication no public exploitation of this security vulnerability was known. Siemens confirms the security vulnerability and provides mitigations to resolve the security issue.

Due to improper validation of certificate in SAP Cloud Connector - version 2.0, attacker can impersonate the genuine servers to interact with SCC breaking the mutual authentication. Hence, the attacker can intercept the request to view/modify sensitive information. There is no impact on the availability of the system.

F5 Access for Android before version 3.1.2 which uses HTTPS does not verify the remote endpoint identity. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of self-signed certificates. The product is found to trust certificates signed with the RIPEMD-160 hashing algorithm without proper validation, allowing an attacker to establish MITM SSL connections to arbitrary sites.

A man in the middle vulnerability exists in Jenkins Inedo BuildMaster Plugin 1.3 and earlier in BuildMasterConfiguration.java, BuildMasterConfig.java, BuildMasterApi.java that allows attackers to impersonate any service that Jenkins connects to.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of certificates issued using the DSA signature algorithm. The product does not properly check the certificate chain, allowing an attacker to establish MITM SSL connections to arbitrary sites using a DSA-signed certificate.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software fails to properly validate website certificates. Specifically, if a site certificate lacks the "Server Authentication" specification in the Extended Key Usage extension, the product does not verify the certificate's compliance with the site, deeming such certificates as valid. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

An improper certificate validation issue in Smartcard authentication in GitLab EE affecting all versions from 11.6 prior to 16.4.4, 16.5 prior to 16.5.4, and 16.6 prior to 16.6.2 allows an attacker to authenticate as another user given their public key if they use Smartcard authentication. Smartcard authentication is an experimental feature and has to be manually enabled by an administrator.

Improper certificate validation in Zoom Workplace for Linux before version 6.4.13 may allow an unauthorized user to conduct an information disclosure via network access.

An improper certificate validation vulnerability [CWE-295] in FortiADC 7.4.0, 7.2.0 through 7.2.3, 7.1 all versions, 7.0 all versions, 6.2 all versions, 6.1 all versions and 6.0 all versions may allow a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the communication channel between the device and various remote servers such as private SDN connectors and FortiToken Cloud.

Acronis True Image prior to 2021 Update 4 for Windows, Acronis True Image prior to 2021 Update 5 for Mac, Acronis Agent prior to build 26653, Acronis Cyber Protect prior to build 27009 did not implement SSL certificate validation.

The Apache Qpid Proton-J transport includes an optional wrapper layer to perform TLS, enabled by use of the 'transport.ssl(...)' methods. Unless a verification mode was explicitly configured, client and server modes previously defaulted as documented to not verifying a peer certificate, with options to configure this explicitly or select a certificate verification mode with or without hostname verification being performed. The latter hostname verifying mode was not implemented in Apache Qpid Proton-J versions 0.3 to 0.29.0, with attempts to use it resulting in an exception. This left only the option to verify the certificate is trusted, leaving such a client vulnerable to Man In The Middle (MITM) attack. Uses of the Proton-J protocol engine which do not utilise the optional transport TLS wrapper are not impacted, e.g. usage within Qpid JMS. Uses of Proton-J utilising the optional transport TLS wrapper layer that wish to enable hostname verification must be upgraded to version 0.30.0 or later and utilise the VerifyMode#VERIFY_PEER_NAME configuration, which is now the default for client mode usage unless configured otherwise.

Dell Networking OS10 versions prior to 10.4.3.0 contain a vulnerability in the Phone Home feature which does not properly validate the server's certificate authority during TLS handshake. Use of an invalid or malicious certificate could potentially allow an attacker to spoof a trusted entity by using a man-in-the-middle (MITM) attack.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software trusts a certificate issued by an entity that isn't authorized to issue certificates. This occurs when the "Basic Constraints" extension in the certificate indicates that it is meant to be an "End Entity”. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

Missing SSL certificate validation in localstack v2.3.2 allows attackers to eavesdrop on communications between the host and server via a man-in-the-middle attack.

IBM Security Guardium EcoSystem 10.5 does not validate, or incorrectly validates, a certificate.This weakness might allow an attacker to spoof a trusted entity by using a man-in-the-middle (MITM) attack. The software might connect to a malicious host while believing it is a trusted host, or the software might be deceived into accepting spoofed data that appears to originate from a trusted host. IBM X-Force ID: 141417.

A man in the middle vulnerability exists in Jenkins Inedo ProGet Plugin 0.8 and earlier in ProGetApi.java, ProGetConfig.java, ProGetConfiguration.java that allows attackers to impersonate any service that Jenkins connects to.

A man in the middle vulnerability exists in Jenkins TraceTronic ECU-TEST Plugin 2.3 and earlier in ATXPublisher.java, ATXValidator.java that allows attackers to impersonate any service that Jenkins connects to.

Missing SSL Certificate Validation issue exists in Pluck 4.7.15 in update_applet.php, which could lead to man-in-the-middle attacks.

A vulnerability has been identified in SINUMERIK Analyse MyCondition (All versions), SINUMERIK Analyze MyPerformance (All versions), SINUMERIK Analyze MyPerformance /OEE-Monitor (All versions), SINUMERIK Analyze MyPerformance /OEE-Tuning (All versions), SINUMERIK Integrate Client 02 (All versions >= V02.00.12 < 02.00.18), SINUMERIK Integrate Client 03 (All versions >= V03.00.12 < 03.00.18), SINUMERIK Integrate Client 04 (V04.00.02 and all versions >= V04.00.15 < 04.00.18), SINUMERIK Integrate for Production 4.1 (All versions < V4.1 SP10 HF3), SINUMERIK Integrate for Production 5.1 (V5.1), SINUMERIK Manage MyMachines (All versions), SINUMERIK Manage MyMachines /Remote (All versions), SINUMERIK Manage MyMachines /Spindel Monitor (All versions), SINUMERIK Manage MyPrograms (All versions), SINUMERIK Manage MyResources /Programs (All versions), SINUMERIK Manage MyResources /Tools (All versions), SINUMERIK Manage MyTools (All versions), SINUMERIK Operate V4.8 (All versions < V4.8 SP8), SINUMERIK Operate V4.93 (All versions < V4.93 HF7), SINUMERIK Operate V4.94 (All versions < V4.94 HF5), SINUMERIK Optimize MyProgramming /NX-Cam Editor (All versions). Due to an error in a third-party dependency the ssl flags used for setting up a TLS connection to a server are overwitten with wrong settings. This results in a missing validation of the server certificate and thus in a possible TLS MITM szenario.

In faye-websocket before version 0.11.0, there is a lack of certification validation in TLS handshakes. The `Faye::WebSocket::Client` class uses the `EM::Connection#start_tls` method in EventMachine to implement the TLS handshake whenever a `wss:` URL is used for the connection. This method does not implement certificate verification by default, meaning that it does not check that the server presents a valid and trusted TLS certificate for the expected hostname. That means that any `wss:` connection made using this library is vulnerable to a man-in-the-middle attack, since it does not confirm the identity of the server it is connected to. For further background information on this issue, please see the referenced GitHub Advisory. Upgrading `faye-websocket` to v0.11.0 is recommended.

The Motorola MBP853 firmware does not correctly validate server certificates. This allows for a Man in The Middle (MiTM) attack to take place between a Motorola MBP853 camera and the servers it communicates with. In one such instance, it was identified that the device was downloading what appeared to be a client certificate.

A vulnerability was found in the Hot Rod client. This security issue occurs as the Hot Rod client does not enable hostname validation when using TLS, possibly resulting in a man-in-the-middle (MITM) attack.

TLS hostname verification when using the Apache ActiveMQ Client before 5.15.6 was missing which could make the client vulnerable to a MITM attack between a Java application using the ActiveMQ client and the ActiveMQ server. This is now enabled by default.

Burp Suite Community Edition 1.7.32 and 1.7.33 fail to validate the server certificate in a couple of HTTPS requests which allows a man in the middle to modify or view traffic.

WP-CLI is the command-line interface for WordPress. An improper error handling in HTTPS requests management in WP-CLI version 0.12.0 and later allows remote attackers able to intercept the communication to remotely disable the certificate verification on WP-CLI side, gaining full control over the communication content, including the ability to impersonate update servers and push malicious updates towards WordPress instances controlled by the vulnerable WP-CLI agent, or push malicious updates toward WP-CLI itself. The vulnerability stems from the fact that the default behavior of `WP_CLI\Utils\http_request()` when encountering a TLS handshake error is to disable certificate validation and retry the same request. The default behavior has been changed with version 2.5.0 of WP-CLI and the `wp-cli/wp-cli` framework (via https://github.com/wp-cli/wp-cli/pull/5523) so that the `WP_CLI\Utils\http_request()` method accepts an `$insecure` option that is `false` by default and consequently that a TLS handshake failure is a hard error by default. This new default is a breaking change and ripples through to all consumers of `WP_CLI\Utils\http_request()`, including those in separate WP-CLI bundled or third-party packages. https://github.com/wp-cli/wp-cli/pull/5523 has also added an `--insecure` flag to the `cli update` command to counter this breaking change. There is no direct workaround for the default insecure behavior of `wp-cli/wp-cli` versions before 2.5.0. The workaround for dealing with the breaking change in the commands directly affected by the new secure default behavior is to add the `--insecure` flag to manually opt-in to the previous insecure behavior.

core/imap/MCIMAPSession.cpp in Canary Mail before 3.22 has Missing SSL Certificate Validation for IMAP in STARTTLS mode.

The LINE MUSIC for Android version 3.1.0 to versions prior to 3.6.5 does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.