An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-1-02-08 and prior. A user without authenticating can make a directory traversal attack by accessing a specific URL.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch contain an SQL injection vulnerability that could give an attacker remote unauthenticated access to the web user interface with administrator-level privileges.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

A file inclusion vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to accepting an arbitrary file into the function, and potential information disclosure or remote code execution. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Multiple heap-based buffer overflow vulnerabilities exist in Honeywell Experion PKS all versions prior to R400.6, all versions prior to R410.6, and all versions prior to R430.2 modules, which could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Multiple stack-based buffer overflows in (1) HWOPOSScale.ocx and (2) HWOPOSSCANNER.ocx in Honeywell OPOS Suite before 1.13.4.15 allow remote attackers to execute arbitrary code via a crafted file that is improperly handled by the Open method.

An arbitrary memory write vulnerability exists in the dual_onsrv.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, that could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. 

Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution, Denial of Service. The Honeywell Experion PKS Safety Manager family of safety controllers utilize the unauthenticated Safety Builder protocol (FSCT-2022-0051) for engineering purposes, including downloading projects and control logic to the controller. Control logic is downloaded to the controller on a block-by-block basis. The logic that is downloaded consists of FLD code compiled to native machine code for the CPU module (which applies to both the Safety Manager and FSC families). Since this logic does not seem to be cryptographically authenticated, it allows an attacker capable of triggering a logic download to execute arbitrary machine code on the controller's CPU module in the context of the runtime. While the researchers could not verify this in detail, the researchers believe that the microprocessor underpinning the FSC and Safety Manager CPU modules is incapable of offering memory protection or privilege separation capabilities which would give an attacker full control of the CPU module. There is no authentication on control logic downloaded to the controller. Memory protection and privilege separation capabilities for the runtime are possibly lacking. The researchers confirmed the issues in question on Safety Manager R145.1 and R152.2 but suspect the issue affects all FSC and SM controllers and associated Safety Builder versions regardless of software or firmware revision. An attacker who can communicate with a Safety Manager controller via the Safety Builder protocol can execute arbitrary code without restrictions on the CPU module, allowing for covert manipulation of control operations and implanting capabilities similar to the TRITON malware (MITRE ATT&CK software ID S1009). A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to improper neutralization of special elements in output, which may allow an attacker to remotely execute arbitrary code and cause a denial-of-service condition.

Stack-based buffer overflow in the HMIWeb Browser HSCDSPRenderDLL ActiveX control in Honeywell Process Solutions (HPS) Experion R2xx, R30x, R31x, and R400.x; Honeywell Building Solutions (HBS) Enterprise Building Manager R400 and R410.1; and Honeywell Environmental Combustion and Controls (ECC) SymmetrE R410.1 allows remote attackers to execute arbitrary code via unspecified vectors.

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

Controller may be loaded with malicious firmware which could enable remote code execution. See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.

Directory traversal vulnerability in the web server on Honeywell Midas gas detectors before 1.13b3 and Midas Black gas detectors before 2.13b3 allows remote attackers to bypass authentication, and write to a configuration file or trigger a calibration or test, via unspecified vectors.

An attacker could potentially exploit this vulnerability, leading to files being read from the Honeywell Experion ControlEdge VirtualUOC and ControlEdge UOC. This exploit could be used to read files from the controller that may expose limited information from the device. Honeywell recommends updating to the most recent version of the product. See Honeywell Security Notification for recommendations on upgrading and versioning.

Honeywell Saia PG5 Controls Suite Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Honeywell Saia PG5 Controls Suite. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of ZIP files. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the current user. . Was ZDI-CAN-18412.

Directory traversal vulnerability in the FTP server on Honeywell Excel Web XL1000C50 52 I/O, XL1000C100 104 I/O, XL1000C500 300 I/O, XL1000C1000 600 I/O, XL1000C50U 52 I/O UUKL, XL1000C100U 104 I/O UUKL, XL1000C500U 300 I/O UUKL, and XL1000C1000U 600 I/O UUKL controllers before 2.04.01 allows remote attackers to read files under the web root, and consequently obtain administrative login access, via a crafted pathname.

A directory traversal vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to possible information disclosure. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Honeywell Saia PG5 Controls Suite CAB File Parsing Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Honeywell Saia PG5 Controls Suite. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of CAB files. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the current user. . Was ZDI-CAN-18592.

Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to relative path traversal, which may allow an attacker access to unauthorized files and directories.

Directory traversal vulnerability in the iNetLanka Multiple root (com_multiroot) component 1.0 and 1.1 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the controller parameter to index.php. NOTE: some of these details are obtained from third party information.

emlog through 6.0.0beta has an arbitrary file deletion vulnerability via an admin/data.php?action=dell_all_bak request with directory traversal sequences in the bak[] parameter.

Directory traversal vulnerability in the iF surfALERT (com_if_surfalert) component 1.2 for Joomla! allows remote attackers to read arbitrary files and possibly have unspecified other impact via a .. (dot dot) in the controller parameter to index.php.

Directory traversal vulnerability in the Real Estate Property (com_properties) component 3.1.22-03 for Joomla! allows remote attackers to read arbitrary files and possibly have unspecified other impact via a .. (dot dot) in the controller parameter to index.php. NOTE: some of these details are obtained from third party information.

A path traversal vulnerability exists in the parisneo/lollms application, specifically within the `sanitize_path_from_endpoint` and `sanitize_path` functions in `lollms_core\lollms\security.py`. This vulnerability allows for arbitrary file reading when the application is running on Windows. The issue arises due to insufficient sanitization of user-supplied input, enabling attackers to bypass the path traversal protection mechanisms by crafting malicious input. Successful exploitation could lead to unauthorized access to sensitive files, information disclosure, and potentially a denial of service (DoS) condition by including numerous large or resource-intensive files. This vulnerability affects the latest version prior to 9.6.

Directory traversal vulnerability in the OrgChart (com_orgchart) component 1.0.0 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the controller parameter to index.php.

An issue was discovered in pfSense through 2.4.4-p3. widgets/widgets/picture.widget.php uses the widgetkey parameter directly without sanitization (e.g., a basename call) for a pathname to file_get_contents or file_put_contents.

A path traversal vulnerability exists in the 'cyber_security/codeguard' native personality of the parisneo/lollms-webui, affecting versions up to 9.5. The vulnerability arises from the improper limitation of a pathname to a restricted directory in the 'process_folder' function within 'lollms-webui/zoos/personalities_zoo/cyber_security/codeguard/scripts/processor.py'. Specifically, the function fails to properly sanitize user-supplied input for the 'code_folder_path', allowing an attacker to specify arbitrary paths using '../' or absolute paths. This flaw leads to arbitrary file read and overwrite capabilities in specified directories without limitations, posing a significant risk of sensitive information disclosure and unauthorized file manipulation.

Directory traversal vulnerability in the J!WHMCS Integrator (com_jwhmcs) component 1.5.0 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the controller parameter to index.php.

Directory traversal vulnerability in the Matamko (com_matamko) component 1.01 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the controller parameter to index.php.

Directory traversal vulnerability in the Picasa (com_joomlapicasa2) component 2.0 and 2.0.5 for Joomla! allows remote attackers to read arbitrary local files via a .. (dot dot) in the controller parameter to index.php. NOTE: some of these details are obtained from third party information.

Directory traversal vulnerability in joomlaflickr.php in the Joomla Flickr (com_joomlaflickr) component 1.0.3 for Joomla! allows remote attackers to include and execute arbitrary local files via a .. (dot dot) in the controller parameter to index.php.

Directory traversal vulnerability in the Gadget Factory (com_gadgetfactory) component 1.0.0 and 1.5.0 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the controller parameter to index.php. NOTE: some of these details are obtained from third party information.

Directory traversal vulnerability in the redTWITTER (com_redtwitter) component 1.0.x including 1.0b11 for Joomla! allows remote attackers to read arbitrary files via a .. (dot dot) in the view parameter to index.php. NOTE: some of these details are obtained from third party information.

Directory Traversal in the web interface of the Tiptel IP 286 with firmware version 2.61.13.10 allows attackers to overwrite arbitrary files on the phone via the Ringtone upload function.

An issue was discovered in PRiSE adAS 1.7.0. The path is not properly escaped in the medatadata_del method, leading to an arbitrary file read and deletion via Directory Traversal.

The wps-child-theme-generator plugin before 1.2 for WordPress has classes/helpers.php directory traversal.

An issue was discovered in CA Unified Infrastructure Management Version 8.47 and earlier. The Unified Infrastructure Management software uses external input to construct a pathname that should be within a restricted directory, but it does not properly neutralize sequences such as ".." that can resolve to a location that is outside of that directory.

An issue was discovered in VirtoSoftware Virto Bulk File Download 5.5.44 for SharePoint 2019. The Virto.SharePoint.FileDownloader/Api/Download.ashx isCompleted method allows arbitrary file download and deletion via absolute path traversal in the path parameter.

Directory traversal vulnerability in the Photo Book (goof_fotoboek) extension 1.7.14 and earlier for TYPO3 has unknown impact and remote attack vectors.

Directory traversal vulnerability in AFP Server in Apple Mac OS X before 10.6.3 allows remote attackers to list a share root's parent directory, and read and modify files in that directory, via unspecified vectors.

A directory traversal vulnerability was discovered in RepetierServer.exe in Repetier-Server 0.8 through 0.91 that allows for the creation of a user controlled XML file at an unintended location. When this is combined with CVE-2019-14451, an attacker can upload an "external command" configuration as a printer configuration, and achieve remote code execution. After exploitation, loading of the external command configuration is dependent on a system reboot or service restart.