Remote code execution is possible in Cloudera Data Science Workbench version 1.3.0 and prior releases via unspecified attack vectors.

Crestron TSW-1060, TSW-760, TSW-560, TSW-1060-NC, TSW-760-NC, and TSW-560-NC devices before 2.001.0037.001 allow unauthenticated remote code execution via command injection in Crestron Toolbox Protocol (CTP).

The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetNetCheckTools. This vulnerability allows attackers to execute arbitrary commands via the hostName parameter.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

In GenieACS 1.2.x before 1.2.8, the UI interface API is vulnerable to unauthenticated OS command injection via the ping host argument (lib/ui/api.ts and lib/ping.ts). The vulnerability arises from insufficient input validation combined with a missing authorization check.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

Telesquare SDT-CW3B1 1.1.0 is affected by an OS command injection vulnerability that allows a remote attacker to execute OS commands without any authentication.

Remote Code Execution (RCE) vulnerability exists in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicious users can use this vulnerability to use "\ " or backticks to bypass the shell metacharacters in the ssid0 or ssid1 parameters to execute arbitrary commands.This vulnerability is due to the fact that CVE-2019-17509 is not fully patched and can be bypassed by using line breaks or backticks on its basis.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340 provided by Y'S corporation. An attacker who can access the affected product may execute an arbitrary OS command.

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in BDCOM Behavior Management and Auditing System up to 20250210 and classified as critical. Affected by this vulnerability is the function log_operate_clear of the file /webui/modules/log/operate.mds. The manipulation of the argument start_code leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Raisecom Multi-Service Intelligent Gateway up to 20250208. It has been declared as critical. This vulnerability affects unknown code of the file /vpn/vpn_template_style.php of the component Request Parameter Handler. The manipulation of the argument stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with an automatic subscription.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Sangfor Operation and Maintenance Management System up to 3.0.8. This issue affects some unknown processing of the file /isomp-protocol/protocol/getHis of the component HTTP POST Request Handler. The manipulation of the argument sessionPath results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this vulnerability is the function websGetVar of the file /goform/set_cmd. The manipulation of the argument cmd leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with a manual subscription or unsubscription.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

PHKP version including commit 88fd9cfdf14ea4b6ac3e3967feea7bcaabb6f03b contains a Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in function pgp_exec() phkp.php:98 that can result in It is possible to manipulate gpg-keys or execute commands remotely. This attack appear to be exploitable via HKP-Api: /pks/lookup?search.

An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.

tdpServer on TP-Link Archer A7 AC1750 devices before 201029 allows remote attackers to execute arbitrary code via the slave_mac parameter. NOTE: this issue exists because of an incomplete fix for CVE-2020-10882 in which shell quotes are mishandled.

The macaddress module before 0.2.9 for Node.js is prone to an arbitrary command injection flaw, due to allowing unsanitized input to an exec (rather than execFile) call.

naholyr github-todos 3.1.0 is vulnerable to command injection. The range argument for the _hook subcommand is concatenated without any validation, and is directly used by the exec function.

Command-injection vulnerability in Huawei E587 3G Mobile Hotspot 11.203.27 allows remote attackers to execute arbitrary shell commands with root privileges due to an error in the Web UI.

The ftpd gem 0.2.1 for Ruby allows remote attackers to execute arbitrary OS commands via shell metacharacters in a LIST or NLST command argument within FTP protocol traffic.

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 in the General.Time.NTP.Server parameter to the sub_C8C8 function of the binary /opt/cgi/view/param, which could let a remove malicious user execute arbitrary code.

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code.

Git-it through 4.4.0 allows OS command injection at the Branches Aren't Just For Birds challenge step. During the verification process, it attempts to run the reflog command followed by the current branch name (which is not sanitized for execution).

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 via the ap parameter to /cgi-bin/mft/wireless_mft.cgi, which could let a remote malicious user execute arbitrary code.

All versions of package kill-process-on-port are vulnerable to Command Injection via a.getProcessPortId.

Zumtobel Netlink CCD Onboard 3.74 - Firmware 3.80 was discovered to contain a command injection vulnerability via the NetHostname parameter.

umount through 1.1.6 is vulnerable to Command Injection. The argument device can be controlled by users without any sanitization.

All versions of package geojson2kml are vulnerable to Command Injection via the index.js file. PoC: var a =require("geojson2kml"); a("./","& touch JHU",function(){})

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A Command Injection vulnerability exists in the /var/www/cgi-bin/rtpd.cgi script in D-Link IP Cameras DCS-3411/3430 firmware 1.02, DCS-5605/5635 1.01, DCS-1100L/1130L 1.04, DCS-1100/1130 1.03, DCS-1100/1130 1.04_US, DCS-2102/2121 1.05_RU, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.00, DCS-7410 1.00, DCS-7510 1.00, and WCS-1100 1.02, which could let a remote malicious user execute arbitrary commands through the camera’s web interface.

The pwrstudio web application of EV Charger (in the server in Circontrol Raption through 5.6.2) is vulnerable to OS command injection via three fields of the configuration menu for ntpserver0, ntpserver1, and pingip.

The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an unauthenticated OS command injection vulnerability in command.php, which improperly handles the cmd POST parameter. A remote attacker can exploit this flaw without authentication to spawn a Telnet service on a specified port, enabling persistent interactive shell access as root.

heroku-addonpool through 0.1.15 is vulnerable to Command Injection.

The Telenium Online Web Application is vulnerable due to a PHP endpoint accessible to unauthenticated network users that improperly handles user-supplied input. This vulnerability occurs due to the insecure termination of a regular expression check within the endpoint. Because the input is not correctly validated or sanitized, an unauthenticated attacker can inject arbitrary operating system commands through a crafted HTTP request, leading to remote code execution on the server in the context of the web application service account.