Citrix ADC, Citrix Gateway, and multiple Citrix SD-WAN WANOP appliance models contain an information disclosure vulnerability.
Apply updates per vendor instructions.
The default configuration of the Security global settings on the Citrix NetScaler Access Gateway appliance with Enterprise Edition firmware 9.0, 8.1, and earlier specifies Allow for the Default Authorization Action option, which might allow remote authenticated users to bypass intended access restrictions.
Citrix ShareFile StorageZones Controller before 5.4.2 has Information Exposure Through an Error Message.
Improper authentication in Citrix StoreFront Server < 1912.0.1000 allows an attacker who is authenticated on the same Microsoft Active Directory domain as a Citrix StoreFront server to read arbitrary files from that server.
Improper access control in Citrix ADC and Citrix Gateway versions before 13.0-58.30, 12.1-57.18, 12.0-63.21, 11.1-64.14 and 10.5-70.18 and Citrix SDWAN WAN-OP versions before 11.1.1a, 11.0.3d and 10.2.7 resulting in limited information disclosure to low privileged users.
In certain Citrix products, information disclosure can be achieved by an authenticated VPN user when there is a configured SSL VPN endpoint. This affects Citrix ADC and Citrix Gateway 13.0-58.30 and later releases before the CTX276688 update.
Directory traversal vulnerability in NetScaler ADC 10.5, 11.0, 11.1, and 12.0, and NetScaler Gateway 10.5, 11.0, 11.1, and 12.0 allows remote attackers to traverse the directory on the target system via a crafted request.
Xen through 4.8.x allows local x86 PV guest OS kernel administrators to cause a denial of service (host hang or crash) by modifying the instruction stream asynchronously while performing certain kernel operations.
The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.
The rate limiting feature in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to have unspecified impact via a large number of crafted requests.
A Directory Traversal issue was discovered in Citrix SD-WAN 10.1.0 and NetScaler SD-WAN 9.3.x before 9.3.6 and 10.0.x before 10.0.4.
Citrix XenServer 7.1 and newer allows Directory Traversal.
Citrix NetScaler Application Delivery Controller (ADC) 10.0 before 10.0-76.7 allows remote attackers to cause a denial of service (nsconfigd crash and appliance reboot) via a crafted request.
NVIDIA vGPU driver contains a vulnerability in the Virtual GPU Manager (vGPU plugin), where there is the potential to write to a shared memory location and manipulate the data after the data has been validated, which may lead to denial of service and escalation of privileges and information disclosure but attacker doesn't have control over what information is obtained. This affects vGPU version 12.x (prior to 12.2), version 11.x (prior to 11.4) and version 8.x (prior to 8.7).
NVIDIA vGPU manager contains a vulnerability in the vGPU plugin, in which input data is not validated, which may lead to unexpected consumption of resources, which in turn may lead to denial of service. This affects vGPU version 8.x (prior to 8.6) and version 11.0 (prior to 11.3).
NVIDIA vGPU software contains a vulnerability in the guest kernel mode driver and vGPU plugin, in which an input index is not validated, which may lead to tampering of data or denial of service. This affects vGPU version 8.x (prior to 8.6) and version 11.0 (prior to 11.3).
NVIDIA vGPU manager contains a vulnerability in the vGPU plugin, in which input data is not validated, which may lead to tampering of data or denial of service. This affects vGPU version 8.x (prior to 8.6) and version 11.0 (prior to 11.3).
NVIDIA vGPU driver contains a vulnerability in the guest kernel mode driver and Virtual GPU Manager (vGPU plugin), in which an input length is not validated, which may lead to information disclosure, tampering of data or denial of service. This affects vGPU version 12.x (prior to 12.2) and version 11.x (prior to 11.4).
NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager (vGPU plugin), in which certain input data is not validated, which may lead to information disclosure, tampering of data, or denial of service. This affects vGPU version 12.x (prior to 12.2), version 11.x (prior to 11.4) and version 8.x (prior 8.7).
An arbitrary file write issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020, which allows remote code execution. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8982.
An unauthenticated arbitrary file read issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8983.
Citrix XenApp Online Plug-in for Windows 12.1 and earlier, and Citrix Receiver for Windows 3.2 and earlier could allow remote attackers to execute arbitrary code by convincing a target to open a specially crafted file from an SMB or WebDAV fileserver.
PHYSDEVOP_map_pirq in Xen 4.1 and 4.2 and Citrix XenServer 6.0.2 and earlier allows local HVM guest OS kernels to cause a denial of service (host crash) and possibly read hypervisor or guest memory via vectors related to a missing range check of map->index.
The physdev_get_free_pirq hypercall in arch/x86/physdev.c in Xen 4.1.x and Citrix XenServer 6.0.2 and earlier uses the return value of the get_free_pirq function as an array index without checking that the return value indicates an error, which allows guest OS users to cause a denial of service (invalid memory write and host crash) and possibly gain privileges via unspecified vectors.
Improper access control in Citrix XenMobile Server 10.12 before RP2, Citrix XenMobile Server 10.11 before RP4, Citrix XenMobile Server 10.10 before RP6 and Citrix XenMobile Server before 10.9 RP5 and leads to the ability to read arbitrary files.
The Windows Guest Tools in Citrix XenServer 6.2 SP1 and earlier allows remote attackers to cause a denial of service (guest OS crash) via a crafted Ethernet frame.
Unauthenticated remote code execution with root privileges in Citrix SD-WAN Center versions before 11.2.2, 11.1.2b and 10.2.8
Improper input validation in Citrix ADC and Citrix Gateway versions before 11.1-63.9 and 12.0-62.10 allows unauthenticated users to perform a denial of service attack.
In certain situations, all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020, allow unauthenticated attackers to access the documents and folders of ShareFile users. NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-8982 and CVE-2020-8983 but has essentially the same risk.
Reflected Cross-Site Scripting (XSS)
In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Directory Traversal vulnerability, leading to remote code execution.
The NSEPA.NsepaCtrl.1 ActiveX control in nsepa.ocx in Citrix Access Gateway Enterprise Edition 8.1 before 8.1-67.7, 9.0 before 9.0-70.5, and 9.1 before 9.1-96.4 attempts to validate signed DLLs by checking the certificate subject, not the signature, which allows man-in-the-middle attackers to execute arbitrary code via HTTP header data referencing a DLL that was signed with a crafted certificate.
An issue was discovered in Citrix Application Delivery Controller (ADC) and Gateway 10.5, 11.1, 12.0, 12.1, and 13.0. They allow Directory Traversal.
Xen, when running on a 64-bit hypervisor, allows local x86 guest OS users to modify arbitrary memory and consequently obtain sensitive information, cause a denial of service (host crash), or execute arbitrary code on the host by leveraging broken emulation of bit test instructions.
The x86 segment base write emulation functionality in Xen 4.4.x through 4.7.x allows local x86 PV guest OS administrators to cause a denial of service (host crash) by leveraging lack of canonical address checks.
Citrix XenMobile Server before 10.5.0.24 allows man-in-the-middle attackers to trigger HTTP 302 redirections via vectors involving the HTTP Host header and a cached page. NOTE: the vendor reports "our internal analysis of this issue concluded that this was not a valid vulnerability" because an exploitation scenario would involve a man-in-the-middle attack against a TLS session
Xen 4.5.x through 4.7.x do not implement Supervisor Mode Access Prevention (SMAP) whitelisting in 32-bit exception and event delivery, which allows local 32-bit PV guest OS kernels to cause a denial of service (hypervisor and VM crash) by triggering a safety check.
Citrix iOS Receiver before 7.0 allows attackers to cause TLS certificates to be incorrectly validated via unspecified vectors.
The do_block_io_op function in (1) drivers/xen/blkback/blkback.c and (2) drivers/xen/blktap/blktap.c in Xen before 3.4.0 for the Linux kernel 2.6.18, and possibly other versions, allows guest OS users to cause a denial of service (infinite loop and CPU consumption) via a large production request index to the blkback or blktap back-end drivers. NOTE: some of these details are obtained from third party information.
Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 allow Directory Traversal.
Citrix ShareFile StorageZones Controller before 5.4.2 allows Directory Traversal.
The pygrub boot loader emulator in Xen, when nul-delimited output format is requested, allows local pygrub-using guest OS administrators to read or delete arbitrary files on the host via NUL bytes in the bootloader configuration file.
The pygrub boot loader emulator in Xen, when S-expression output format is requested, allows local pygrub-using guest OS administrators to read or delete arbitrary files on the host via string quotes and S-expressions in the bootloader configuration file.
Path Traversal vulnerability in API Endpoint in Mobile Industrial Robots (MiR) Software Versions prior to 3.0.0 on MiR Robots allows authenticated users to extract files from the robot file system via a crafted API request.
Directory traversal vulnerability in TitanFTPd in South River Technologies Titan FTP Server 8.10.1125, and probably earlier versions, allows remote authenticated users to read arbitrary files, determine file size, via "..//" sequences in the xcrc command.
A security flaw has been discovered in lostvip-com ruoyi-go up to 2.1. Impacted is the function DownloadTmp/DownloadUpload of the file modules/system/controller/CommonController.go. Performing manipulation of the argument fileName results in path traversal. It is possible to initiate the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
Directory traversal vulnerability in webFileBrowser.php in Web File Browser 0.4b14 allows remote authenticated users to read arbitrary files via a ..%2f (encoded dot dot) in the file parameter in a download action.
Directory traversal vulnerability in Fortinet FortiWeb before 5.5.3 allows remote authenticated administrators with read and write privileges to read arbitrary files by leveraging the autolearn feature.
The Custom Query Shortcode plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 0.4.0 via the 'lens' parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to read the contents of files on the server, which can contain sensitive information.
An issue was discovered in MantisBT through 1.3.14, and 2.0.0. Using a crafted request on bug_report_page.php (modifying the 'm_id' parameter), any user with REPORTER access or above is able to view any private issue's details (summary, description, steps to reproduce, additional information) when cloning it. By checking the 'Copy issue notes' and 'Copy attachments' checkboxes and completing the clone operation, this data also becomes public (except private notes).
Organization Portal System developed by WellChoose has an Arbitrary File Reading vulnerability, allowing remote attackers with regular privileges to exploit Absolute Path Traversal to download arbitrary system files.