The FusionSphere OpenStack V100R006C00SPC102(NFV) has a command injection vulnerability. Due to the insufficient input validation on one port, an authenticated, local attacker may exploit the vulnerability to gain root privileges by sending message with malicious commands.
The GaussDB in FusionSphere OpenStack V100R005C10SPC705 and earlier versions has a buffer overflow vulnerability. An authenticated attacker on the LAN can exploit this vulnerability to execute arbitrary code or cause a denial of service (DoS) condition in the affected system.
Path traversal vulnerability in the DFS module Impact: Successful exploitation of this vulnerability may affect service confidentiality.
The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands.
The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
FusionSphere OpenStack with software V100R006C00 and V100R006C10RC2 has two command injection vulnerabilities due to the insufficient input validation on one port. An attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
FusionSphere OpenStack with software V100R006C00 and V100R006C10RC2 has two command injection vulnerabilities due to the insufficient input validation on one port. An attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
VCM5010 with software versions earlier before V100R002C50SPC100 has a command injection vulnerability. This is due to insufficient validation of user's input. An authenticated attacker could launch a command injection attack.
GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.
The Keyguard application in ALE-L02C635B140 and earlier versions,ALE-L02C636B140 and earlier versions,ALE-L21C10B150 and earlier versions,ALE-L21C185B200 and earlier versions,ALE-L21C432B214 and earlier versions,ALE-L21C464B150 and earlier versions,ALE-L21C636B200 and earlier versions,ALE-L23C605B190 and earlier versions,ALE-TL00C01B250 and earlier versions,ALE-UL00C00B250 and earlier versions,MT7-L09C605B325 and earlier versions,MT7-L09C900B339 and earlier versions,MT7-TL10C900B339 and earlier versions,CRR-CL00C92B172 and earlier versions,CRR-L09C432B180 and earlier versions,CRR-TL00C01B172 and earlier versions,CRR-UL00C00B172 and earlier versions,CRR-UL20C432B171 and earlier versions,GRA-CL00C92B230 and earlier versions,GRA-L09C432B222 and earlier versions,GRA-TL00C01B230SP01 and earlier versions,GRA-UL00C00B230 and earlier versions,GRA-UL00C10B201 and earlier versions,GRA-UL00C432B220 and earlier versions,H60-L04C10B523 and earlier versions,H60-L04C185B523 and earlier versions,H60-L04C636B527 and earlier versions,H60-L04C900B530 and earlier versions,PLK-AL10C00B220 and earlier versions,PLK-AL10C92B220 and earlier versions,PLK-CL00C92B220 and earlier versions,PLK-L01C10B140 and earlier versions,PLK-L01C185B130 and earlier versions,PLK-L01C432B187 and earlier versions,PLK-L01C432B190 and earlier versions,PLK-L01C432B190 and earlier versions,PLK-L01C636B130 and earlier versions,PLK-TL00C01B220 and earlier versions,PLK-TL01HC01B220 and earlier versions,PLK-UL00C17B220 and earlier versions,ATH-AL00C00B210 and earlier versions,ATH-AL00C92B200 and earlier versions,ATH-CL00C92B210 and earlier versions,ATH-TL00C01B210 and earlier versions,ATH-TL00HC01B210 and earlier versions,ATH-UL00C00B210 and earlier versions,RIO-AL00C00B220 and earlier versions,RIO-CL00C92B220 and earlier versions,RIO-TL00C01B220 and earlier versions,RIO-UL00C00B220 and earlier versions have a privilege elevation vulnerability. An attacker may exploit it to launch command injection in order to gain elevated privileges.
The laser command injection vulnerability exists on AIS-BW80H-00 versions earlier than AIS-BW80H-00 9.0.3.4(H100SP13C00). The devices cannot effectively defend against external malicious interference. Attackers need the device to be visually exploitable and successful triggering of this vulnerability could execute voice commands on the device.
FusionCompute 8.0.0 have a command injection vulnerability. The software does not sufficiently validate certain parameters post from user, successful exploit could allow an authenticated attacker to launch a command injection attack.
Command injection vulnerability in the distributed file system module. Successful exploitation of this vulnerability may cause variables in the sock structure to be modified.
Huawei OceanStor 5600 V3 with V300R003C00C10 and earlier versions allows attackers with administrator privilege to inject a command into a specific command's parameters, and run this injected command with root privilege.
Some Huawei products have a command injection vulnerability. Due to insufficient input validation, an attacker with high privilege may inject some malicious codes in some files of the affected products. Successful exploit may cause command injection.Affected product versions include:NIP6300 versions V500R001C30,V500R001C60;NIP6600 versions V500R001C30,V500R001C60;Secospace USG6300 versions V500R001C30,V500R001C60;Secospace USG6500 versions V500R001C30,V500R001C60;Secospace USG6600 versions V500R001C30,V500R001C60;USG9500 versions V500R001C30,V500R001C60.
There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.
There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. Successful exploitation could allow attackers to gain higher privileges.
There is a command injection vulnerability in Huawei terminal printer product. Successful exploitation could result in the highest privileges of the printer. (Vulnerability ID: HWPSIRT-2022-51773) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2022-32203.
There is a command injection vulnerability in CMA service module of FusionCompute product when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system. Affected product versions include: FusionCompute 6.0.0, 6.3.0, 6.3.1, 6.5.0, 6.5.1, 8.0.0.
There is a command injection vulnerability in CMA service module of FusionCompute 6.3.0, 6.3.1, 6.5.0 and 8.0.0 when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system.
FusionSphere OpenStack V100R006C00SPC102(NFV)has a command injection vulnerability. Due to lack of validation, an attacker with high privilege may inject malicious code into some module of the affected products, causing code execution.
Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted.
The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.
The login page of the server on Huawei FusionServer rack servers RH2288 V3 with software before V100R003C00SPC603, RH2288H V3 with software before V100R003C00SPC503, XH628 V3 with software before V100R003C00SPC602, RH1288 V3 with software before V100R003C00SPC602, RH2288A V2 with software before V100R002C00SPC701, RH1288A V2 with software before V100R002C00SPC502, RH8100 V3 with software before V100R003C00SPC110, CH222 V3 with software before V100R001C00SPC161, CH220 V3 with software before V100R001C00SPC161, and CH121 V3 with software before V100R001C00SPC161 allows remote attackers to bypass access restrictions and enter commands via unspecified parameters, as demonstrated by a "user creation command."
Huawei FusionCompute versions 6.5.1 and 8.0.0 have a command injection vulnerability. An authenticated, remote attacker can craft specific request to exploit this vulnerability. Due to insufficient verification, this could be exploited to cause the attackers to obtain higher privilege.
ManageOne versions 6.5.1.1.B010, 6.5.1.1.B020, 6.5.1.1.B030, 6.5.1.1.B040, ,6.5.1.1.B050, 8.0.0 and 8.0.1 have a command injection vulnerability. An attacker with high privileges may exploit this vulnerability through some operations on the plug-in component. Due to insufficient input validation of some parameters, the attacker can exploit this vulnerability to inject commands to the target device.
The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6100 before 1.0.0.63, D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7800 before 1.0.1.56, D8500 before 1.0.3.44, DGN2200Bv4 before 1.0.0.109, DGN2200v4 before 1.0.0.110, R6250 before 1.0.4.34, R6300v2 before 1.0.4.34, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v3 before 1.0.2.66, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300 before 1.0.0.70, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, WNDR3400v3 before 1.0.1.24, WNR3500Lv2 before 1.2.0.62, and XR500 before 2.3.2.56.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user . This affects RAX200 before 1.0.3.106, RAX75 before 1.0.3.106, RAX80 before 1.0.3.106, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RAX75 before 1.0.3.106, RAX80 before 1.0.3.106, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBS50Y before 2.7.3.22, RBR20 before 2.7.3.22, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, RBS20 before 2.7.3.22, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, RBK20 before 2.7.3.22, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RAX75 before 1.0.3.106, RAX80 before 1.0.3.106, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.74, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R7000 before 1.0.11.126, R6900P before 1.3.3.140, R7000P before 1.3.3.140, and R8000 before 1.0.4.74.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7900P before 1.4.2.84, R7960P before 1.4.2.84, and R8000P before 1.4.2.84.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects EX6120 before 1.0.0.66, EX6130 before 1.0.0.46, EX7000 before 1.0.1.106, EX7500 before 1.0.1.76, EX3700 before 1.0.0.94, EX3800 before 1.0.0.94, RBR850 before 4.6.3.9, RBS850 before 4.6.3.9, and RBK852 before 4.6.3.9.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects LAX20 before 1.1.6.28, MK62 before 1.1.6.122, MR60 before 1.1.6.122, MS60 before 1.1.6.122, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.116, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.38, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RS400 before 1.5.1.80, and XR1000 before 1.0.0.58.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.