Delta Electronics DIAEnergie (all versions prior to 1.8.02.004) are vulnerable to a DLL hijacking condition. When combined with the Incorrect Default Permissions vulnerability of 4.2.2 above, this makes it possible for an attacker to escalate privileges

A DLL search path vulnerability was reported in Lenovo PCManager prior to version 4.0.40.2175 that could allow privilege escalation.

Shenzhen Tencent TIM Windows client 3.0.0.21315 has a DLL hijacking vulnerability, which can be exploited by attackers to execute malicious code.

A vulnerability in Cisco Packet Tracer for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path on the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow an attacker with normal user privileges to execute arbitrary code on the affected system with the privileges of another user’s account.

A maliciously crafted DLL file can be forced to write beyond allocated boundaries in the Autodesk installer when parsing the DLL files and could lead to a Privilege Escalation vulnerability.

SonicWall Global VPN Client 4.10.7.1117 installer (32-bit and 64-bit) and earlier versions have a DLL Search Order Hijacking vulnerability in one of the installer components. Successful exploitation via a local attacker could result in command execution in the target system.

Delta Electronics CNCSoft-B DOPSoft prior to v4.0.0.82 insecurely loads libraries, which may allow an attacker to use DLL hijacking and take over the system where the software is installed.

A vulnerability in the loading mechanism of specific DLLs of Cisco Advanced Malware Protection (AMP) for Endpoints for Windows and Immunet for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with SYSTEM privileges.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system.

An Uncontrolled Search Path Element vulnerability exists which could allow a malicious actor to perform DLL hijacking and execute arbitrary code with escalated privileges.

Uncontrolled search path in the Intel(R) NUC M15 Laptop Kit Driver Pack software before updated version 1.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

Earlier than HiSuite 10.1.0.500 have a DLL hijacking vulnerability. This vulnerability exists due to some DLL file is loaded by HiSuite improperly. And it allows an attacker to load this DLL file of the attacker's choosing.

A dynamic library loading issue was addressed with improved path searching. This issue is fixed in Windows Migration Assistant 2.2.0.0 (v. 1A11). Running the installer in an untrusted directory may result in arbitrary code execution.

Adobe Lightroom versions 9.2.0.10 and earlier have an insecure library loading vulnerability. Successful exploitation could lead to privilege escalation.

Uncontrolled search path in software installer for Intel(R) PROSet/Wireless WiFi in Windows 10 may allow an authenticated user to potentially enable escalation of privilege via local access.

Uncontrolled search path element in the installer for the Intel(R) Rapid Storage Technology software, before versions 17.9.0.34, 18.0.0.640 and 18.1.0.24, may allow an authenticated user to potentially enable escalation of privilege via local access.

Adobe Genuine Service version 6.6 (and earlier) is affected by an Uncontrolled Search Path element vulnerability. An authenticated attacker with admin privileges could plant custom binaries and execute them with System permissions. Exploitation of this issue requires user interaction.

Western Digital WesternDigitalSSDDashboardSetup.exe before 3.0.2.0 allows DLL Hijacking.

A DLL search path vulnerability was reported in the Lenovo HardwareScan Plugin for the Lenovo Vantage hardware scan feature prior to version 1.0.46.11 that could allow escalation of privilege.

Mids' Reborn Hero Designer 2.6.0.7 has an elevation of privilege vulnerability due to default and insecure permissions being set for the installation folder. By default, the Authenticated Users group has Modify permissions to the installation folder. Because of this, any user on the system can replace binaries or plant malicious DLLs to obtain elevated, or different, privileges, depending on the context of the user that runs the application.

Untrusted Search Path vulnerability in the windows installer of Google Earth Pro versions prior to 7.3.3 allows an attacker to insert malicious local files to execute unauthenticated remote code on the targeted system.

Trend Micro Password Manager for Windows version 5.0 is affected by a DLL hijacking vulnerability would could potentially allow an attacker privleged escalation.

An issue was discovered in Regify Regipay Client for Windows version 4.5.1.0 allows DLL hijacking: a user can trigger the execution of arbitrary code every time the product is executed.

A vulnerability was found in Viscosity 1.6.7. It has been classified as critical. This affects an unknown part of the component DLL Handler. The manipulation leads to untrusted search path. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.8 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in InnoSetup Installer. It has been declared as problematic. Affected by this vulnerability is an unknown functionality. The manipulation leads to uncontrolled search path. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A DLL hijacking vulnerability exists in the uninstaller in Scooter Beyond Compare 1.8a through 4.4.2 before 4.4.3 when installed via the EXE installer. The uninstaller attempts to load DLLs out of a Windows Temp folder. If a standard user places malicious DLLs in the C:\Windows\Temp\ folder, and then the uninstaller is run as SYSTEM, the DLLs will execute with elevated privileges.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Configuration Manager installer up to and including version 7.21.0078 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

A DLL Hijacking vulnerability in Eaton's 9000x Programming and Configuration Software v 2.0.38 and prior allows an attacker to execute arbitrary code by replacing the required DLLs with malicious DLLs when the software try to load vci11un6.DLL and cinpl.DLL.

A vulnerability was found in XAMPP 7.1.1-0-VC14. It has been classified as problematic. Affected is an unknown function of the component Installer. The manipulation leads to privilege escalation. It is possible to launch the attack remotely.

Loading a DLL through an Uncontrolled Search Path Element in Bosch IP Helper up to and including version 1.00.0008 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same application directory as the portable IP Helper application.

A vulnerability classified as problematic was found in Python 2.7.13. This vulnerability affects unknown code of the component pgAdmin4. The manipulation leads to uncontrolled search path. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Recording Manager installer up to and including version 3.82.0055 for 3.82, up to and including version 3.81.0064 for 3.81 and 3.71 and older potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in Bosch BVMS and BVMS Viewer in versions 10.1.0, 10.0.1, 10.0.0 and 9.0.0 and older potentially allows an attacker to execute arbitrary code on a victim's system. This affects both the installer as well as the installed application. This also affects Bosch DIVAR IP 7000 R2, Bosch DIVAR IP all-in-one 5000 and Bosch DIVAR IP all-in-one 7000 with installers and installed BVMS versions prior to BVMS 10.1.1.

An Uncontrolled Search Path Element (CWE-427) vulnerability in SmartControl version 4.3.15 and versions released before April 15, 2020 may allow an authenticated user to escalate privileges by placing a specially crafted DLL file in the search path. This issue was fixed in version 1.0.7, which was released after April 15, 2020. (Note, the version numbering system changed significantly between version 4.3.15 and version 1.0.7.)

Calling an executable through an Uncontrolled Search Path Element in the Bosch Video Streaming Gateway installer up to and including version 6.45.10 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious exe in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Monitor Wall installer up to and including version 10.00.0164 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Client installer up to and including version 1.7.6.079 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

McAfee Total Protection prior to version 16.0.49 contains an uncontrolled search path element vulnerability due to the use of a variable pointing to a subdirectory that may be controllable by an unprivileged user. This may have allowed the unprivileged user to execute arbitrary code with system privileges.

Untrusted search path vulnerability in the installers of multiple SEIKO EPSON products allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

Uncontrolled search path element vulnerability in Plesk Installer affects version 3.27.0.0. A local attacker could execute arbitrary code by injecting DLL files into the same folder where the application is installed, resulting in DLL hijacking in edputil.dll, samlib.dll, urlmon.dll, sspicli.dll, propsys.dll and profapi.dll files.

Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40901, Acronis Cyber Protect Cloud Agent (Windows) before build 39378, Acronis Cyber Protect 16 (Windows) before build 39938, Acronis True Image OEM (Windows) before build 42575.

NVIDIA GeForce NOW application software on Windows, all versions prior to 2.0.25.119, contains a vulnerability in its open-source software dependency in which the OpenSSL library is vulnerable to binary planting attacks by a local user, which may lead to code execution or escalation of privileges.

SonicWall Global VPN client version 4.10.4.0314 and earlier have an insecure library loading (DLL hijacking) vulnerability. Successful exploitation could lead to remote code execution in the target system.

An uncontrolled search path element vulnerability has been found on 4D and 4D server Windows executables applications, affecting version 19 R8 100218. This vulnerability consists in a DLL hijacking by replacing x64 shfolder.dll in the installation path, causing an arbitrary code execution.

Installer of Panasonic AutoDownloader version 1.2.8 contains an issue with the DLL search path, which may lead to loading a crafted DLL file in the same directory.

An escalation of privilege vulnerability in Nahimic APO Software Component Driver 1.4.2, 1.5.0, 1.5.1, 1.6.1 and 1.6.2 allows an attacker to execute code with SYSTEM privileges.

pymanager included the current working directory in sys.path meaning modules could be shadowed by modules in the current working directory. As a result, if a user executes a pymanager-generated command (e.g., pip, pytest) from an attacker-controlled directory, a malicious module in that directory can be imported and executed instead of the intended package.

An issue was discovered in LG Bridge before April 2019 on Windows. DLL Hijacking can occur.

Adobe Acrobat and Reader versions 2020.006.20034 and earlier, 2017.011.30158 and earlier, 2017.011.30158 and earlier, 2015.006.30510 and earlier, and 2015.006.30510 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation.

A binary hijack in Orwell-Dev-Cpp v5.11 allows attackers to execute arbitrary code via a crafted .exe file.