A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.

A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901.

Unspecified vulnerability in Cisco Wireless Control System (WCS) before 4.0.87.0 allows remote authenticated users to gain the privileges of the SuperUsers group, and manage the application and its networks, related to the group membership of user accounts, aka Bug ID CSCsg05190.

The web framework in Cisco Prime Collaboration Assurance before 10.5.1.53684-1 allows remote authenticated users to bypass intended access restrictions, and create administrative accounts or read data from arbitrary tenant domains, via a crafted URL, aka Bug IDs CSCus62671 and CSCus62652.

The web framework in Cisco TelePresence Advanced Media Gateway Series Software before 1.1(1.40), Cisco TelePresence IP Gateway Series Software, Cisco TelePresence IP VCR Series Software before 3.0(1.27), Cisco TelePresence ISDN Gateway Software before 2.2(1.94), Cisco TelePresence MCU Software before 4.4(3.54) and 4.5 before 4.5(1.45), Cisco TelePresence MSE Supervisor Software before 2.3(1.38), Cisco TelePresence Serial Gateway Series Software before 1.0(1.42), Cisco TelePresence Server Software for Hardware before 3.1(1.98), and Cisco TelePresence Server Software for Virtual Machine before 4.1(1.79) allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors, aka Bug IDs CSCul55968, CSCur08993, CSCur15803, CSCur15807, CSCur15825, CSCur15832, CSCur15842, CSCur15850, and CSCur15855.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as root. This vulnerability is due to insufficient validation of user-supplied input. An attacker with valid credentials could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, the attacker must have valid high-privileged credentials.

The web framework in Cisco Prime Collaboration Provisioning before 11.0 allows remote authenticated users to bypass intended access restrictions and create administrative accounts via a crafted URL, aka Bug ID CSCut64111.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3o) and 1.1 before 1.1(1j) and Nexus 9000 ACI devices with software before 11.0(4o) and 11.1 before 11.1(1j) do not properly restrict access to the APIC filesystem, which allows remote authenticated users to obtain root privileges via unspecified use of the APIC cluster-management configuration feature, aka Bug IDs CSCuu72094 and CSCuv11991.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Unrestricted file upload vulnerability in the Custom Prompts upload implementation in Cisco Unified MeetingPlace 8.6(1.9) allows remote authenticated users to execute arbitrary code by using the languageShortName parameter to upload a file that provides shell access, aka Bug ID CSCus95712.

The administrative web interface in Cisco WebEx Meetings Server 1.0 through 1.5 allows remote authenticated users to execute arbitrary OS commands with root privileges via unspecified fields, aka Bug ID CSCuj40460.

Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux root user, aka an Insecure Default Password Vulnerability. More Information: CSCvc76631. Known Affected Releases: 2.2(9.76).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in certain commands of Cisco Elastic Services Controller could allow an authenticated, remote attacker to elevate privileges to root and run dangerous commands on the server. The vulnerability occurs because a "tomcat" user on the system can run certain shell commands, allowing the user to overwrite any file on the filesystem and elevate privileges to root. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76634.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

The server in Cisco Unity Connection 9.1(1) and 9.1(2) allows remote authenticated users to obtain privileged access by conducting an "HTTP Intercept" attack and leveraging the ability to read files within the context of the web-server user account, aka Bug ID CSCup41014.

The VPN implementation in Cisco ASA Software 7.2 before 7.2(5.15), 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.6), and 9.3 before 9.3(1.1) does not properly implement a tunnel filter, which allows remote authenticated users to obtain failover-unit access via crafted packets, aka Bug ID CSCuq28582.

The Administration GUI in the web framework in Cisco Unified Communications Domain Manager (CDM) in Unified CDM Application Software before 8.1.4 does not properly implement access control, which allows remote authenticated users to modify administrative credentials via a crafted URL, aka Bug ID CSCun49862.

The network-diagnostics administration interface in the Cisco RV router firmware on RV220W devices, before 1.0.5.9 on RV120W devices, and before 1.0.4.14 on RV180 and RV180W devices allows remote authenticated users to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCuh87126.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

The RMI interface in Cisco Secure Access Control System (ACS) 5.x before 5.5 does not properly enforce authorization requirements, which allows remote authenticated users to obtain superadmin access via a request to this interface, aka Bug ID CSCud75180.

Cisco Prime Infrastructure 1.2 and 1.3 before 1.3.0.20-2, 1.4 before 1.4.0.45-2, and 2.0 before 2.0.0.0.294-2 allows remote authenticated users to execute arbitrary commands with root privileges via an unspecified URL, aka Bug ID CSCum71308.

Cisco TelePresence TC Software 4.x and 5.x before 5.1.7 and 6.x before 6.0.1 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to tshell (aka tcsh) scripts, aka Bug ID CSCue60202.

Cisco TelePresence TC Software 4.x through 6.x before 6.2.0 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to internal system scripts, aka Bug ID CSCue60211.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL sent over IPv4, aka Bug ID CSCzv69294.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Secure Network Analytics Manager and Cisco Secure Network Analytics Virtual Manager could allow an authenticated, remote attacker with valid administrative credentials to execute arbitrary commands as root on the underlying operating system. This vulnerability is due to insufficient input validation in specific fields of the web-based management interface. An attacker with valid administrative credentials could exploit this vulnerability by sending crafted input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. 

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as root. This vulnerability is due to insufficient validation of user-supplied input. An attacker with valid credentials could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, the attacker must have valid high-privileged credentials.

A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability in an API of Cisco ISE could allow an authenticated, remote attacker with valid read-only credentials to obtain sensitive information, change node configurations, and restart the node. This vulnerability is due to a lack of authorization in a specific API and improper validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to attacker to obtain information, modify system configuration, and reload the device. Note: To successfully exploit this vulnerability, the attacker must have valid read-only administrative credentials. In a single-node deployment, new devices will not be able to authenticate during the reload time.

A vulnerability in the API of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload request to a specific API endpoint. A successful exploit could allow the attacker to upload arbitrary files to an affected system.