Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

A vulnerability in the Web UI and administrative CLI of the Cisco Secure Email Gateway (ESA) and Cisco Secure Email and Web Manager (SMA) could allow an authenticated remote attacker and or authenticated local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a [[privilege of operator - validate actual name]]. The vulnerability is due to the processing of a specially crafted SNMP configuration file. An attacker could exploit this vulnerability by authenticating to the targeted device and uploading a specially crafted SNMP configuration file that when uploaded could allow for the execution of commands as root. An exploit could allow the attacker to gain root access on the device.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read-write privileges on the application to perform a command injection attack that could result in remote code execution on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to establish a remote shell with root privileges.

Two vulnerabilities in Cisco ISE could allow an authenticated, remote attacker to upload arbitrary files to an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. These vulnerabilities are due to improper validation of files that are uploaded to the web-based management interface. An attacker could exploit these vulnerabilities by uploading a crafted file to an affected device. A successful exploit could allow the attacker to store malicious files in specific directories on the device. The attacker could later use those files to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Two vulnerabilities in Cisco ISE could allow an authenticated, remote attacker to upload arbitrary files to an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. These vulnerabilities are due to improper validation of files that are uploaded to the web-based management interface. An attacker could exploit these vulnerabilities by uploading a crafted file to an affected device. A successful exploit could allow the attacker to store malicious files in specific directories on the device. The attacker could later use those files to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.

A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

A vulnerability in Cisco Secure Network Analytics could allow an authenticated, remote attacker to execute arbitrary code as a root user on an affected device. This vulnerability is due to insufficient validation of user input to the web interface. An attacker could exploit this vulnerability by uploading a crafted file to an affected device. A successful exploit could allow the attacker to execute code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320 and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.

A vulnerability in the web-based management interface of Cisco Small Business Routers RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device. Cisco has not and will not release software updates that address this vulnerability. However, administrators may disable the affected feature as described in the Workarounds ["#workarounds"] section. {{value}} ["%7b%7bvalue%7d%7d"])}]]

A vulnerability in the session management system of the Cisco Catalyst SD-WAN Manager multi-tenant feature could allow an authenticated, remote attacker to access another tenant that is being managed by the same Cisco Catalyst SD-WAN Manager instance. This vulnerability requires the multi-tenant feature to be enabled. This vulnerability is due to insufficient user session management within the Cisco Catalyst SD-WAN Manager system. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain unauthorized access to information about another tenant, make configuration changes, or possibly take a tenant offline causing a denial of service condition.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. This vulnerability is due to improper processing of serialized Java objects by the affected application. An attacker could exploit this vulnerability by uploading a document containing malicious serialized Java objects to be processed by the affected application. A successful exploit could allow the attacker to cause the application to execute arbitrary commands.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A vulnerability in Cisco Emergency Responder, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an authenticated, remote attacker to elevate privileges to root on an affected device. This vulnerability exists because the application does not properly restrict the files that are being used for upgrades. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to elevate privileges to root. To exploit this vulnerability, the attacker must have valid platform administrator credentials on an affected device.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550; Email Security Appliance devices before 7.1.5-104, 7.3 before 7.3.2-026, 7.5 before 7.5.2-203, and 7.6 before 7.6.3-019; and Content Security Management Appliance devices before 7.2.2-110, 7.7 before 7.7.0-213, and 7.8 and 7.9 before 7.9.1-102 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL, aka Bug IDs CSCzv85726, CSCzv44633, and CSCzv24579.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL sent over IPv4, aka Bug ID CSCzv69294.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.